Status: Fixed
Duplicati now defaults to not upload a backup if nothing has changed.
This is indicated by a light-green check mark in the status window.
The option --upload-unchanged-backups can be set to revert to the previous way of working.
git-svn-id: https://duplicati.googlecode.com/svn/trunk@958 59da171f-624f-0410-aa54-27559c288bec
Status: Fixed
Thanks to Livio, this is now fixed and can be toggled with the --allow-sleep command.
It will be included in the next preview release.
git-svn-id: https://duplicati.googlecode.com/svn/trunk@807 59da171f-624f-0410-aa54-27559c288bec
This commit includes an option to create an unencrypted verification file.
There is now a check to see if all volumes mentioned in the manifest exists,
before performing backup/restore operations.
This check is also performed on cleanup.
There is now a check that prevents auto-cleanup from removing more than
2 orphan files.
If a delete-older-than or delete-all-but-n-full is interrupted, the leftover
files will not be auto-deleted but must be deleted with the cleanup command,
which allows the user to see what files are delete.
Update issue #360
Status: Fixed
There is now a complete verification chain, where the manifest hashes are verified backwards.
git-svn-id: https://duplicati.googlecode.com/svn/trunk@711 59da171f-624f-0410-aa54-27559c288bec
Status: Fixed
That is an incorrect warning, the priority is applied despite the warning.
I have fixed the code so the warning does not appear anymore.
git-svn-id: https://duplicati.googlecode.com/svn/trunk@675 59da171f-624f-0410-aa54-27559c288bec
Status: Fixed
Now allows 1% (max 1 hour) slack in the time difference.
Can be disabled with the --disable-time-tolerance flag.
git-svn-id: https://duplicati.googlecode.com/svn/trunk@595 59da171f-624f-0410-aa54-27559c288bec
Status: Fixed
The implementation is a mix of the the three mentioned methods (issue #247).
There is a commandline option called --open-file-policy, which can be set to
"ignore", "snapshot" or "copy".
The "ignore" setting does the same as previous version, simply exclude the file from the
backup set.
If the setting is either "snapshot" or "copy", and the file it locked, it is opened in non-excusive read mode.
Once open, a in-memory signature file is generated. This is compared to the previous signature to detect changes,
just as the normal operation. If the file has not changed, the file is skipped as it would normally be.
If the file has changed and the policy is "snapshot", the file will be processed as normal,
but during the file read, a new signature is generated. This new signature is stored
in the signature archives. When writing the new signature, it is compared to the original signature.
If the file has changed during the backup operation, a warning is written to the output log.
If the policy was set to "copy", the modified file is copied to a temporary location,
while a new signature is generated. If the copy fails due to a file change, the file
is omitted from the backup set. If the copy succeeds, the file is known to not have changed
during the first access and the copy, which gives some assurance that the file is not
actively being written, at the expense of a copy operation.
The default setting is "snapshot", because this is likely to work in most scenarios,
and potentially produces a broken file rather than guarantee a missing file (by "ignore").
Note that when reading an open file, there is always a chance that the file is being written,
so you may end up with a broken file in the backup. This is also true for the VSS and LVM snapshots,
except for VSS-aware applications.
The "copy" method is meant to minimize this risk, but there is no guarantee that the file is in an
acceptable state, just because it has not been written for any period.
git-svn-id: https://duplicati.googlecode.com/svn/trunk@588 59da171f-624f-0410-aa54-27559c288bec
Status: Fixed
USN is now activated by default on windows, but requires Administrative privileges.
If it fails to activate, it is silently ignored, and normal filesystem enumeration is used.
Set --usn-policy to:
"on" to get a warning if it fails,
"required" to abort the backup if it fails
"off" to disable USN
"auto" to silently ignore a fail
git-svn-id: https://duplicati.googlecode.com/svn/trunk@584 59da171f-624f-0410-aa54-27559c288bec
Added the --vss-exclude-writers option.
Update issue #260
Status: Fixed
I have now added a --vss-exclude-writers commandline option.
I had another look at the other supported options, and I consider this the most important.
I made the simplest possible version, so it only supports class guids, not component names
or writer instance ids.
If you need any of the other switches or the component names, please let me know.
I would also be interested in hearing that it actually works (I get no errors, but thats no proof).
You can specify multiple writers with a semicolon: --vss-exclude-writers="{d61d61c8-d73a-4eee-8cdd-f6f9786b7124};{0bada1de-01a9-4625-8278-69e735f39dd2}"
If you need the guids, you can get them with the following command in a command prompt:
vssadmin list writers
git-svn-id: https://duplicati.googlecode.com/svn/trunk@574 59da171f-624f-0410-aa54-27559c288bec
Previously some backends autocreated a missing folder, and some threw an exception.
The new standard is that all backends throw the FolderMissingException on all access (except delete).
This means that the Test() and List() methods are now the same for all stock backends.
Third-party applications that use the backends should implement custom logic to auto-create the folders,
when the FolderMissingException is encountered.
Duplicati auto-creates missing folders, but this can be toggled through the new flag --disable-autocreate-folders.
In case the auto-create fails to detect a missing folder, there is now a "create-folder" action in the commandline version.
Update issue #102
Status: Fixed
The IBackend_v2 interface has the CreateFolder and Test methods.
The CreateFolder is exposed to the commandline interface with the action create-folder.
git-svn-id: https://duplicati.googlecode.com/svn/trunk@558 59da171f-624f-0410-aa54-27559c288bec
Since encryption (and compression) is detected after being encountered, the encryption module selection has been removed from the user interface when restoring.
git-svn-id: https://duplicati.googlecode.com/svn/trunk@527 59da171f-624f-0410-aa54-27559c288bec
Status: Fixed
A restore now defaults to background and some filenames are also shown while restoring.
The "direct restore" option cannot run in the background as it requires the schedule to be stored in the database.
This can be fixed after version 2.0
git-svn-id: https://duplicati.googlecode.com/svn/trunk@525 59da171f-624f-0410-aa54-27559c288bec
Fixed a protential race condition with warning messages and file counts (cosmetic only) when using async transfers.
Spelling correction, Seperator -> Separator.
Changed so a restore operation can also supply advanced options.
Changed the format of timestamps in filenames to follow the Duplicity convention, which removes the need for --time-separator and --use-short-filenames.
Moved the URL utility into Core, to avoid compilation errors with Monodevelop.
Reorganized the runner to better support the LiveControls on all operations rather than only for backup/restore.
Update issue #210
Status: Fixed
I have now changed the time format to follow the Duplicity naming convention.
This means that all filenames are now generated with the time set as "yyyyMMddTHHmmssZ".
This format is more portable across all platforms, and easily sortable/readable.
The drawback is that the Z indicates UTC time, so if one looks at the filenames,
the times are not local. The motivation for this is to avoid trouble
with daylight savings time offsets.
There is full backwards compatibility as long as backups have not used more than
one character for --time-separator (only possible via commandline).
This new format means that the options --time-separator and --use-short-filenames
are now deprecated and removed from the user interface. It is possible to
access them from the advanced options page, along with the --use-old-filenames option.
If anyone needs these options for some reason, let me know, otherwise they will be removed
in a later version.
git-svn-id: https://duplicati.googlecode.com/svn/trunk@523 59da171f-624f-0410-aa54-27559c288bec
Status: Fixed
I have now added an option called --exclude-empty-folders
It excludes folders AFTER the filter has been applied, so if the folder is left empty due to the filter, the folder is not included either.
git-svn-id: https://duplicati.googlecode.com/svn/trunk@520 59da171f-624f-0410-aa54-27559c288bec
Status: Fixed
Added the first generic module, a password request module.
The motivation for this is to allow the creation of custom passphrase modules.
A simple model would be to add a GUI input dialog.
A more sophisticated version may read a passphrase to an encrypted file which contains the real passphrase or similar.
git-svn-id: https://duplicati.googlecode.com/svn/trunk@519 59da171f-624f-0410-aa54-27559c288bec
Also fixed a bug with the "allow-full-removal" option.
Update issue 110
I have now added a limit to the number of generated volumes, and as described, it is 2 by default.
I have also added support for setting a custom folder where the volumes are placed in. They are placed in the temp folder by default.
I re-read the comments on this issue, and I can see that I misread the statements from Baris.Eris.
This limit does not prevent any volumes from being uploaded (you can use the --totalsize option for that),
it just pauses the volume generation when there are already two or more volumes waiting to be uploaded.
As soon as a volume is uploaded, the program continues. The purpose of this is not to limit the data being
uploaded, but rather to prevent spamming the disk with hundreds of volumes.
git-svn-id: https://duplicati.googlecode.com/svn/trunk@476 59da171f-624f-0410-aa54-27559c288bec
Added snapshot support using either VSS (win xp/vista/7) or LVM (linux).
Using the snapshot feature requires administrative/root privileges, and is toggled by the "snapshot-policy" option (by commandline or in advanced settings).
Also improved the validation of options to not show incorrect warnings.
This fixes issue #233.
git-svn-id: https://duplicati.googlecode.com/svn/trunk@461 59da171f-624f-0410-aa54-27559c288bec
This was based on the idea that the interfaces should remain static.
I hope this change is enough to ensure stable interfaces until release 1.2.
Overview of changes:
Moved all interfaces into the same dll.
Encryption and compression is now plugable modules, just as the backends.
Encryption/compression can now register an UI.
Encryption now uses AESCrypt as a default.
GPG does not default to using the --armor option.
Added support for generic modules, but none are written yet.
Added support for plugable settings pages in the "Options" dialog.
Fixed issue #148.
Duplicati now uses AESCrypt as the default encryption format.
Fixed issue #199.
GPG now supports custom commandline options.
Fixed issue #207.
Encryption modules are now plugable.
Fixed issue #118.
S3 credentials are now stored.
Fixed issue #151.
Backends can now register system wide options.
git-svn-id: https://duplicati.googlecode.com/svn/trunk@427 59da171f-624f-0410-aa54-27559c288bec
Fixed issue #104.
Also added the cleanup messages to the output log,
which will display any errors that occur during cleanup.
git-svn-id: https://duplicati.googlecode.com/svn/trunk@347 59da171f-624f-0410-aa54-27559c288bec
Fixed issue #69.
Fixed issue #142.
I finally got the time to complete the pause and throttle options.
It required a minor rewrite, so I also fixed issue #142.
git-svn-id: https://duplicati.googlecode.com/svn/trunk@310 59da171f-624f-0410-aa54-27559c288bec
