kenneth.skovhede@gmail.com
a02cdfc6cd
Status: Fixed After a lot of work, I have now re-written the entire SharpRSync library. My tests indicate that generating a diff file for an 8gb file took 10 minutes before, and now takes 8 minutes. A delta for the same (unchanged) 8GB file took 58 minutes, and now takes 7 minutes. The implementation seems to run faster under 64 bit, but I'm unsure if it is related to the actual instructions issued, or the address simulation/conversion done by the OS. I have also greatly optimized the amount of memory required by the program. On windows, a delta for an 8GB file can be now be created with a total of 125 mb required memory. The base app takes 65mb, so the used memory is around 60mb, and the raw diff file is approximately 44mb. I compared it a bit to the rdiff program on linux. For a 150mb file, rdiff takes about 1 second to generate a diff, and the same for a delta. SharpRSync runs the same in about 7 seconds, although some of that is the mono startup and library loading. For a 8gb file rdiff can generate a diff in about 500 seconds, where SharpRSync takes about 590 seconds. When generating a delta, rdiff uses 530 seconds, and SharpRSync uses 770 seconds. The last measurement is inaccurate as the memory requirement under mono is greater, and the test machine had low memory, so there was a lot of swapping going on. An interesting side effect is that the rdiff generated delta file is about 380kb, where the SharpRSync delta is 15 bytes. This is because rdiff does not do the sequence matching optimization mentioned on the librsync page (last paragraph): http://rsync.samba.org/tech_report/node4.html Further optimization should probably focus on getting the MD4 algorithm to run faster. git-svn-id: https://duplicati.googlecode.com/svn/trunk@480 59da171f-624f-0410-aa54-27559c288bec
129 lines
6.1 KiB
XML
129 lines
6.1 KiB
XML
<?xml version="1.0" encoding="utf-8"?>
|
|
<root>
|
|
<!--
|
|
Microsoft ResX Schema
|
|
|
|
Version 2.0
|
|
|
|
The primary goals of this format is to allow a simple XML format
|
|
that is mostly human readable. The generation and parsing of the
|
|
various data types are done through the TypeConverter classes
|
|
associated with the data types.
|
|
|
|
Example:
|
|
|
|
... ado.net/XML headers & schema ...
|
|
<resheader name="resmimetype">text/microsoft-resx</resheader>
|
|
<resheader name="version">2.0</resheader>
|
|
<resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
|
|
<resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
|
|
<data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
|
|
<data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
|
|
<data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
|
|
<value>[base64 mime encoded serialized .NET Framework object]</value>
|
|
</data>
|
|
<data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
|
|
<value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
|
|
<comment>This is a comment</comment>
|
|
</data>
|
|
|
|
There are any number of "resheader" rows that contain simple
|
|
name/value pairs.
|
|
|
|
Each data row contains a name, and value. The row also contains a
|
|
type or mimetype. Type corresponds to a .NET class that support
|
|
text/value conversion through the TypeConverter architecture.
|
|
Classes that don't support this are serialized and stored with the
|
|
mimetype set.
|
|
|
|
The mimetype is used for serialized objects, and tells the
|
|
ResXResourceReader how to depersist the object. This is currently not
|
|
extensible. For a given mimetype the value must be set accordingly:
|
|
|
|
Note - application/x-microsoft.net.object.binary.base64 is the format
|
|
that the ResXResourceWriter will generate, however the reader can
|
|
read any of the formats listed below.
|
|
|
|
mimetype: application/x-microsoft.net.object.binary.base64
|
|
value : The object must be serialized with
|
|
: System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
|
|
: and then encoded with base64 encoding.
|
|
|
|
mimetype: application/x-microsoft.net.object.soap.base64
|
|
value : The object must be serialized with
|
|
: System.Runtime.Serialization.Formatters.Soap.SoapFormatter
|
|
: and then encoded with base64 encoding.
|
|
|
|
mimetype: application/x-microsoft.net.object.bytearray.base64
|
|
value : The object must be serialized into a byte array
|
|
: using a System.ComponentModel.TypeConverter
|
|
: and then encoded with base64 encoding.
|
|
-->
|
|
<xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
|
|
<xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
|
|
<xsd:element name="root" msdata:IsDataSet="true">
|
|
<xsd:complexType>
|
|
<xsd:choice maxOccurs="unbounded">
|
|
<xsd:element name="metadata">
|
|
<xsd:complexType>
|
|
<xsd:sequence>
|
|
<xsd:element name="value" type="xsd:string" minOccurs="0" />
|
|
</xsd:sequence>
|
|
<xsd:attribute name="name" use="required" type="xsd:string" />
|
|
<xsd:attribute name="type" type="xsd:string" />
|
|
<xsd:attribute name="mimetype" type="xsd:string" />
|
|
<xsd:attribute ref="xml:space" />
|
|
</xsd:complexType>
|
|
</xsd:element>
|
|
<xsd:element name="assembly">
|
|
<xsd:complexType>
|
|
<xsd:attribute name="alias" type="xsd:string" />
|
|
<xsd:attribute name="name" type="xsd:string" />
|
|
</xsd:complexType>
|
|
</xsd:element>
|
|
<xsd:element name="data">
|
|
<xsd:complexType>
|
|
<xsd:sequence>
|
|
<xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
|
|
<xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
|
|
</xsd:sequence>
|
|
<xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
|
|
<xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
|
|
<xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
|
|
<xsd:attribute ref="xml:space" />
|
|
</xsd:complexType>
|
|
</xsd:element>
|
|
<xsd:element name="resheader">
|
|
<xsd:complexType>
|
|
<xsd:sequence>
|
|
<xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
|
|
</xsd:sequence>
|
|
<xsd:attribute name="name" type="xsd:string" use="required" />
|
|
</xsd:complexType>
|
|
</xsd:element>
|
|
</xsd:choice>
|
|
</xsd:complexType>
|
|
</xsd:element>
|
|
</xsd:schema>
|
|
<resheader name="resmimetype">
|
|
<value>text/microsoft-resx</value>
|
|
</resheader>
|
|
<resheader name="version">
|
|
<value>2.0</value>
|
|
</resheader>
|
|
<resheader name="reader">
|
|
<value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
|
|
</resheader>
|
|
<resheader name="writer">
|
|
<value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
|
|
</resheader>
|
|
<data name="ErrorOccurred" xml:space="preserve">
|
|
<value>An error occurred: {0}</value>
|
|
</data>
|
|
<data name="UsageMessage" xml:space="preserve">
|
|
<value>Usage:
|
|
{0} signature <input-file> <signature-file>
|
|
{0} delta <signature-file> <input-file> <delta-file>
|
|
{0} patch <base-file> <delta-file> <output-file></value>
|
|
</data>
|
|
</root> |