Pouzor
322600f1c9
A Zigbee2MQTT networkmap on a 200+ device mesh takes minutes to build.
Two separate failures fell out of that:
- POST /zigbee/import held the HTTP request open for the whole MQTT
round-trip, so any reverse proxy in front of the API cut it first
(Cloudflare returns a 524 at 120 s) and the browser never saw the map.
It now registers a job, fetches in the background and answers 202; the
client polls GET /zigbee/import/{job_id} until the payload is ready.
Job results are transient and live in memory with a 15 min TTL — the
same single-worker assumption the scheduler already makes. A failed
fetch replays the status the synchronous route used to raise, so a bad
broker is still a 502 and a slow mesh still a 504.
- The networkmap wait was hard-coded at 300 s with no way to raise it.
It now reads ZIGBEE_NETWORKMAP_TIMEOUT, and the shared MQTT round-trip
used by the Z-Wave import reads MQTT_RESPONSE_TIMEOUT. Both default to
300 s, fall back to that if misconfigured to a non-positive value, and
name themselves in the timeout message.
Also corrects the route and doc claims that the wait was 60 s.
The /import tests changed with the contract they cover, not to pass.
Fixes #380
ha-relevant: yes
109 lines
5.3 KiB
Bash
109 lines
5.3 KiB
Bash
# Backend - server-side only (NEVER commit .env)
|
||
# Generate: python3 -c "import secrets; print(secrets.token_hex(32))"
|
||
SECRET_KEY=change_me_in_production
|
||
SQLITE_PATH=./data/homelab.db
|
||
# Uploaded media (floor plans) folder. Optional — defaults to <SQLITE_PATH dir>/uploads,
|
||
# which sits on the same persistent volume as the DB.
|
||
# UPLOAD_DIR=./data/uploads
|
||
# Set this to the URL(s) you use to access Homelable in your browser.
|
||
CORS_ORIGINS=["http://localhost:5173","http://localhost:3000"]
|
||
|
||
# Auth — local mode is the backward-compatible default.
|
||
AUTH_MODE=local
|
||
# Local credentials: admin / admin by default.
|
||
# ⚠️ Change before exposing on a network.
|
||
# Generate a new hash: python3 -c "import bcrypt; print(bcrypt.hashpw(b'yourpassword', bcrypt.gensalt()).decode())"
|
||
# ⚠️ Keep the single quotes around the hash — bcrypt hashes contain \$ which Docker misinterprets without them.
|
||
AUTH_USERNAME=admin
|
||
AUTH_PASSWORD_HASH='$2b$12$RtMbyw17l4N5UGzeXMNAWuzCaVV.XFBY7ZetWheQhxcBDcxahapkG'
|
||
|
||
# OpenID Connect (optional alternative to local auth).
|
||
# Set AUTH_MODE=oidc and configure every value below. The callback must be
|
||
# registered exactly at the identity provider. Keep CORS_ORIGINS restricted to
|
||
# the Homelable browser origin; wildcard CORS is rejected in OIDC mode. OIDC
|
||
# also requires SECRET_KEY to contain at least 32 bytes.
|
||
# AUTH_MODE=oidc
|
||
# OIDC_DISCOVERY_URL=https://idp.example/application/o/homelable/.well-known/openid-configuration
|
||
# OIDC_CLIENT_ID=homelable
|
||
# OIDC_CLIENT_SECRET=replace-with-a-secret
|
||
# OIDC_REDIRECT_URI=https://homelable.example/api/v1/auth/oidc/callback
|
||
# OIDC_SCOPES="openid profile email"
|
||
# OIDC_COOKIE_SECURE=true
|
||
# OIDC_SESSION_EXPIRE_MINUTES=480
|
||
# OIDC_TRANSACTION_EXPIRE_SECONDS=600
|
||
|
||
# Scanner — JSON array of CIDR ranges to scan
|
||
SCANNER_RANGES=["192.168.1.0/24"]
|
||
|
||
# Deep scan (optional) — extra nmap port ranges + HTTP probe for service ID on
|
||
# custom ports. Defaults below are overridable per-scan from the scan dialog.
|
||
# SCANNER_HTTP_RANGES: JSON array of port specs, each a single port "N" or an
|
||
# inclusive range "N-M" (1–65535, N <= M). Not CIDRs, not bare ints.
|
||
# Example: SCANNER_HTTP_RANGES=["8080","9000-9100"]
|
||
SCANNER_HTTP_RANGES=[]
|
||
SCANNER_HTTP_PROBE_ENABLED=false
|
||
SCANNER_HTTP_VERIFY_TLS=false
|
||
|
||
# Status checker interval in seconds
|
||
STATUS_CHECKER_INTERVAL=60
|
||
|
||
# MCP server — used by the mcp service (port 8001)
|
||
# MCP_API_KEY: authenticates AI clients (Claude Code, etc.) → MCP server
|
||
# MCP_SERVICE_KEY: authenticates MCP server → backend (never exposed externally)
|
||
# Generate keys: python3 -c "import secrets; print(secrets.token_hex(32))"
|
||
MCP_API_KEY=mcp_sk_changeme
|
||
MCP_SERVICE_KEY=svc_changeme
|
||
|
||
# Live view — read-only public canvas at /view?key=<value>
|
||
# Off by default. Set to a random secret to enable.
|
||
# Generate: python3 -c "import secrets; print(secrets.token_urlsafe(32))"
|
||
# LIVEVIEW_KEY=
|
||
|
||
# Gethomepage widget — read-only stats at /api/v1/stats/summary
|
||
# Off by default. Set to a random secret to enable; clients must send
|
||
# the same value in the `X-API-Key` header.
|
||
# Generate: python3 -c "import secrets; print(secrets.token_urlsafe(32))"
|
||
# HOMEPAGE_API_KEY=
|
||
|
||
# Proxmox VE import — pull hosts/VMs/LXC from the Proxmox REST API.
|
||
# The token is a credential: kept in memory only, never written to disk by the
|
||
# app, never returned by any API. Create it under Datacenter → Permissions →
|
||
# API Tokens and grant the read-only PVEAuditor role at path "/".
|
||
# Token id format: user@realm!tokenname (e.g. root@pam!homelable).
|
||
# Required only for auto-sync; one-off imports can pass the token in the dialog.
|
||
# PROXMOX_TOKEN_ID=root@pam!homelable
|
||
# PROXMOX_TOKEN_SECRET=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
|
||
# PROXMOX_HOST=192.168.1.10
|
||
# PROXMOX_PORT=8006
|
||
# PROXMOX_VERIFY_TLS=true # set false only for self-signed certs
|
||
|
||
# Zigbee2MQTT auto-sync — pull the mesh from an MQTT broker on a schedule.
|
||
# MQTT credentials are secrets: kept in memory only, never written to disk by
|
||
# the app, never returned by any API. Manual imports (the Zigbee dialog) are
|
||
# unaffected — this block only powers Settings → Zigbee auto-sync and /sync-now.
|
||
# Required only for auto-sync; one-off imports pass their config in the dialog.
|
||
# ZIGBEE_MQTT_HOST=192.168.1.20
|
||
# ZIGBEE_MQTT_PORT=1883
|
||
# ZIGBEE_MQTT_USERNAME=mqttuser # optional
|
||
# ZIGBEE_MQTT_PASSWORD=mqttpass # optional
|
||
# ZIGBEE_BASE_TOPIC=zigbee2mqtt
|
||
# ZIGBEE_MQTT_TLS=false # true for TLS brokers (typically port 8883)
|
||
# ZIGBEE_MQTT_TLS_INSECURE=false # skip cert verify (self-signed only; requires TLS)
|
||
# Seconds to wait for the Z2M bridge to answer a networkmap request. Applies to
|
||
# manual imports too. Raise it on a large mesh (200+ devices can take minutes)
|
||
# if an import fails with "Timed out waiting for networkmap response".
|
||
# ZIGBEE_NETWORKMAP_TIMEOUT=300
|
||
|
||
# Z-Wave JS UI (zwavejs2mqtt) auto-sync — same MQTT secret/env rules as Zigbee.
|
||
# ZWAVE_MQTT_HOST=192.168.1.20
|
||
# ZWAVE_MQTT_PORT=1883
|
||
# ZWAVE_MQTT_USERNAME=mqttuser # optional
|
||
# ZWAVE_MQTT_PASSWORD=mqttpass # optional
|
||
# ZWAVE_PREFIX=zwave
|
||
# ZWAVE_GATEWAY_NAME=zwavejs2mqtt
|
||
# ZWAVE_MQTT_TLS=false # true for TLS brokers (typically port 8883)
|
||
# ZWAVE_MQTT_TLS_INSECURE=false # skip cert verify (self-signed only; requires TLS)
|
||
# Seconds to wait for the gateway to answer an MQTT request. Same rationale as
|
||
# ZIGBEE_NETWORKMAP_TIMEOUT above.
|
||
# MQTT_RESPONSE_TIMEOUT=300
|