New media added server-side was invisible while the app was open - the
client had no channel for library-change notifications, so the home
screen and library tabs sat stale until an app restart.
Each online server now runs a reconnecting websocket push channel
(Plex `/:/websockets/notifications`; Jellyfin/Emby `/socket` with the
dialect deltas, including Emby's capabilities registration), owned per
server by a LibraryEventService supervisor that follows server
online/offline/replaced-client transitions and app lifecycle. Channels
emit one coalesced LibraryChangeEvent per burst on a leading-edge
throttle modeled on Plex Web's repopulate pacing: the first settled
change surfaces immediately and a library scan's flood merges behind
it. Connection failure degrades silently to the stale-refresh paths -
bounded reconnect backoff, re-armed on every status sync.
Consumers pace their reaction through one shared RefreshPacer: burst
debounce, blocked retry while video playback or an active scroll owns
the surface, a cooldown bounding pass frequency during bulk imports,
and credit for committed pull passes so a push landing right after a
fresh load defers to the cooldown's trailing edge.
- Discover runs a debounced full pass and swaps the result in place;
the hero carousel resets only when a pass lands first content, so a
push never yanks a screen the user is reading. Pushed removals drop
from every visible list immediately via the deletion bus, scoped to
the emitting server.
- The visible library tab swaps its data in place: transaction tabs
reload without clearing, and the browse and paginated card grids
refetch their loaded span (Plex Web's repopulateRange) with the
scroll offset anchored on the first visible item and the span
clamped after alpha jumps. Hidden tabs - and tabs behind another
main tab - mark per-library staleness epochs instead and reload when
next shown; epochs are snapshotted at load start so a push racing an
in-flight fetch stays stale.
- The stale-resume and tab-shown paths refetch home hubs (previously
Continue Watching only), covering setups where the socket cannot
connect.
close#1646
The library grid packs posters edge to edge. The grid delegate's cross-
and main-axis spacing were hardcoded to zero, so the only visible gap
came from each card's own 3px padding, and Library Density changed
poster size rather than the space between posters. The result reads
denser than Plex, Jellyfin, or any commercial client, both horizontally
between posters and vertically between a poster and its title.
Add a Grid Spacing setting - Tight, Normal, Spacious (0/6/12px) - below
Library Density. Tight is the default and reproduces the current layout
exactly, so no existing grid moves on update.
The gutter lands in MediaGridDelegate.spacingFor(), already the single
funnel for non-full-bleed grid spacing, so every grid surface picks it
up: library browse, collections, playlists, downloads, and the detail
screens. Square music grids keep their 8px floor. The pref is watched
once in MediaCardSliverLayout - the only MediaGridGeometry.resolve()
call site - so grids re-layout live instead of on restart.
Grid cells grow the poster-to-title gap to 2/4/6px as well; the
Expanded poster absorbs the delta, so the cell keeps its aspect ratio.
Fixed-height hub-row cards keep the historical 2px because their text
band cannot absorb more, and hub-row cell packing opts out of the
setting entirely so shelves stay byte-identical across it.
Full-bleed TV grids are untouched - they already carry an 8-18px
scale-derived gutter - and are opt-in behind tvFullCardLayout, so the
default TV library grid follows the setting like every other surface.
Verified on macOS across all three steps: gutters and title gap grow,
grids re-pack live, and the segmented control reflects and writes the
value.
close#1597close#2083
Non-English users saw English text in a dozen places and blank labels in
sixteen more.
The English came from sites that produce their copy away from the widget
that renders it, which is what the structural hardcoded-string check
cannot see: picture-in-picture refused with a raw literal instead of the
pipErrors.notSupported key that already existed; the two Jellyfin/Emby
auth throws missing display: rendered their developer message on the
add-server form; ServerParsingException.toString() fed its English into
the localized "Failed to load servers" wrapper; Watch Together
interpolated the whole PeerError, so a failed create read "Failed to
create session: PeerError(PeerErrorType.timeout): Timed out creating
session" and join printed its prefix twice; the hub and playlist
continuation footers rendered exception.toString(); shader rows showed an
English title over an already translated subtitle; the player queue fell
back to the raw Dart enum name; a Plex home user with no title showed
"Unknown"; a failed player start showed "Exception: Failed to initialize
player"; and the tvOS top-shelf header was hardcoded in an extension that
has no Flutter engine.
The blanks came from three recent features that added English keys
without translations. clean_translations.py filled all 21 siblings with
empty strings, so the Android TV resolution switch, every Jellyfin/Emby
recording-rule field, the demuxer row, the Companion Remote address
caption and the Seerr blocklist pill rendered nothing at all.
Two fixes are structural rather than key swaps. ContinuationStatusSliver
now takes an errorContext and calls a new non-logging
localizedLoadErrorText, so no future throw can leak through it. lib/mpv
stays free of user-facing copy: it raises a PlayerInitializationException
sentinel and a PlayerError.playerInitFailed cause tag that the player
screen resolves to localized text. The tvOS section title travels in the
shelf payload, additively, so an older cache still renders.
The three browse chips opened bottom sheets on every form factor. On
desktop platforms they now anchor dropdown popups to the chip: grouping
is a radio menu, sort shows the direction on the active field
(re-selecting toggles it) plus Clear, and filters use a two-level menu
with per-category values and an All row to clear one category. Phones
and TV keep the existing sheets.
Both anchored popups were small tap targets on phones. AppMenuButton
gains an opt-in adaptiveSheet flag that routes through
showAdaptiveAppMenu: full-width, untitled sheet rows on touch platforms
(phones plus Android TV / tvOS), the same anchored popup on desktop.
Opening Plezy on a TV box resumes the resident process rather than
cold-starting it, so the Libraries grid kept showing the in-memory
content from the previous session -- hours stale -- until the user
switched libraries and back. Nothing on the resume path refreshed tab
content.
MainScreen now latches genuine backgrounding and, on a resume more than
five minutes later, refreshes LibrariesProvider and sweeps the content
tabs through each screen's in-place Refreshable.refresh() -- skipped
while offline, before startup priming, during playback, or with no
connected servers. LibrariesScreen.refresh() now refetches the selected
library's loaded tabs (the toolbar refresh action) instead of
re-selecting the saved library, which never reloaded them because tab
widgets only reload when the library's globalKey changes.
close#2043
Plex "Other Videos" libraries returned items as type=movie with
subtype=clip, which mapped to MediaKind.movie and rendered 2:3 poster
cards that cropped the generated 16:9 video-frame thumbs.
Items keep the movie kind so downloads, add-to, delete-from-server, and
detail navigation stay available, but subtype=clip now renders wide with
the thumb-first artwork clips already use. Sections marked subtype=clip
in /media/providers map to the clip library kind, giving Plex home-video
libraries the same folder-first grouping and wide grid cells as
MediaBrowser homevideos views. Wide-only hubs also keep 16:9 cards in
the poster episode modes, matching the TV rail's gate.
close#2036
plex_pin_auth_flow's QR knobs, ProfileNameField's navigation params, MusicDetailHeader.wideArtworkSize, and _buildReorderableList's bool were never passed; DownloadType.manage was never constructed; MediaContextMenu.onTap was declared but never invoked — removed with its four card passes (each card's own gesture handlers stay); the pin dialog's obscure chain was always true and _PinKey.label's icon branches unreachable; libraries_screen._isInitialLoad was write-only; LiveTvActionsMixin loses dead findChannel (the generic parameter stays — required by the on-clause, the report was wrong); add_jellyfin's focus-map removal branch ran only against an empty map; the recommended tab's hub-key null fallback was dead behind _ensureHubKeys. media_card also loses its always-false seasonal-rank comparison from the CatalogRankScope removal.
LibraryFilterSortLoader had one call site that constructed it with a constant client resolver and bypassed it for MediaBrowser anyway; the Plex branch now loads both futures inline with types instead of casts. LibrariesScreen's ItemUpdatable application ended in an empty no-op that would have burnt a network fetch had anything ever called it. The chips-bar grouping sheet re-built the browse-options grouping page's chrome by hand; both paths now render the same BottomSheetPageScaffold page.
On TV, pressing UP in the library Collections or Playlists grid snapped
the list back to the top and dropped focus on the tab chips, making long
lists impossible to navigate. Default directional focus traversal scrolls
the found card into view via Scrollable.ensureVisible, whose
outer-scrollable pass routes through the NestedScrollView coordinator and
resets the inner grid position to zero on every UP press.
Give the shared paginated card grid explicit per-card d-pad navigation,
matching the browse tab: managed per-index focus nodes, row/column moves
that request focus directly, first-row UP to the tab bar, and
first-column LEFT to the sidebar. Focus changes now scroll only through
FocusableWrapper's delta-based auto-scroll.
close#1977
BaseLibraryTabState documented an abstract loadData() that every tab "must implement", but three of the four tabs override loadItems() entirely and carried never-invoked empty loadData stubs; only the recommended tab exercised the contract, so the class docs described an extension surface that did not exist.
loadItems() is now the one overridable hook, and the shared load transaction (generation tracking, localized error mapping, post-frame onDataLoaded) lives once in the protected runLoadTransaction helper that the recommended tab and the focus tests route through. No tab's load behavior changes.
The library quick picker and the libraries dropdown each hand-rolled their own BackendBadge + server-name label rendering with divergent show-when policies: the picker only labeled libraries whose titles collided, so a uniquely-titled library on a multi-server list showed its server in the dropdown but not in the picker.
Both surfaces now share library_server_label.dart — one label widget, one grouping loop over groupLibrariesByFirstAppearance, and one policy: group headers whenever the visible list spans more than one server, per-row labels only in ungrouped lists. The picker's duplicate-title heuristic is gone; its test now pins the unified policy.
Sheets rendered at the host's maximum height regardless of content, so a
one-item player queue or a two-track picker filled ~75% of a desktop window
with empty space.
BottomSheetPageScaffold now always lays out Column(mainAxisSize: .min) plus
Flexible(child:), and each sheet body shrink-wraps its own scrollable. The
scaffold's shrinkWrap flag is gone: its old true branch put the child on an
unbounded axis, where an over-tall list overflowed instead of clamping and
scrolling. Measured on a 1600x1000 window, the chapter sheet goes from 750px
to 118px for one chapter and the two-column track sheet from 750px to 154px
for one audio and one subtitle track, both still clamping at the cap.
Add SheetSplitColumns for the three side-by-side sheet layouts. A bare
VerticalDivider has no intrinsic height, so it inflated those rows to the cap
on its own; the rule now paints from a Positioned.fill that cannot size the
Stack. IntrinsicHeight is not an option because a Viewport has no intrinsics.
Because sheets are bottom-anchored, a content-driven height moves the sheet's
top edge and everything above the change point. Three surfaces opt out for
that reason and say so at the call site: SubtitleSearchSheet and its language
picker keep filling, since both refilter under an autofocused field;
FiltersBottomSheet holds the outgoing page's height through its loading
transient; and RatingBottomSheet no longer hides MAL/AniList rows
asynchronously, which used to slide live rating controls down two rows several
hundred ms after open. Wrap the shared StateMessageWidget at the filters sheet
boundary rather than editing a widget with 33 filling call sites.
The host gains an AnimatedSize keyed per sheet session so nested pushes ease
while a replacing show adopts its own height, a 720px absolute height ceiling
on desktop windows only, and a min(max(25%, 96px), 60%) drag-dismiss threshold
so short sheets neither close on a nudge nor become undismissable.
Add videoControls.noAudioDevicesAvailable so the audio output page shows a
placeholder instead of a bare header while devices load.
Emby is Jellyfin's upstream ancestor and speaks a near-identical MediaBrowser
API, so the existing Jellyfin stack is parameterised by a `MediaBrowserDialect`
rather than forked. `JellyfinClient`, its auth service, endpoint discovery, LAN
discovery, and the add/edit connection screens all take the dialect and keep one
implementation; `MediaBackend.emby` and `ConnectionKind.emby` carry it through
the neutral models, the Drift `kind` discriminator, downloads, and caches.
Every divergence below was measured against a live Emby 4.9.5 server, not
inferred from documentation, and each is documented at its capability getter.
Jellyfin's request strings stay byte-identical so nothing about its behaviour
changes.
Routes and auth
- Emby only accepts the pre-10.9 user-scoped item routes (`/Users/{id}/Items/…`,
`/Users/{id}/PlayedItems/…`, `/Users/{id}/FavoriteItems/…`); the unprefixed
forms Jellyfin 10.11 added return 404.
- The API is also served under a legacy `/emby` prefix, and both dialects accept
the token as `X-Emby-Token` or `api_key=`.
- Emby answers only its own LAN discovery datagram ("who is EmbyServer?") and
ignores Jellyfin's; its default HTTPS port is 8920.
- No `/QuickConnect` route exists, so Quick Connect stays Jellyfin-only.
Row fields Emby withholds
- `ProductionYear`, `OfficialRating`, `PremiereDate` and `DateCreated` are absent
from list rows unless named in `Fields`, which would otherwise strip the year
and age-rating badge from every card in the app.
- `UserData.LastPlayedDate` never appears on a list row under `Fields=UserData`,
`EnableUserData=true` or the user-scoped `Ids=` form — only on the single-item
detail route, or when the Emby-specific `UserDataLastPlayedDate` token is
requested. Without it every recency-ordered surface silently degrades to
library-add time, and `JellyfinApiCache.applyWatchState` stamps
`DateTime.now()` on watched rows, so an offline watch-state pull would rewrite
the cached play time of everything it walked.
Continue Watching and Next Up
- Emby computes Next Up per series only: the library-wide `/Shows/NextUp` query
returns nothing under every parameter combination tried. The shelf is
therefore reconstructed from a played-episode recency scan plus one
`/Shows/NextUp?SeriesId=` per distinct series, bounded by a shared wall clock
that covers the scan as well — per-request timeouts cannot bound the pass
because `MediaServerHttpClient` times the connect and receive phases
independently. Rows are stamped with their series' newest play from the same
response that ordered them, so no per-series enrichment request is needed.
- `/Shows/NextUp` ignores `NextUpDateCutoff`, and no server-side played-date
filter exists to delegate to (`MinDatePlayed` and `MinDateLastPlayed` are
ignored; `MinDateLastSaved`, `MinDateCreated` and `MinPremiereDate` filter
unrelated dates), so the 365-day window is applied to the scanned dates.
- The resume route returns items with no saved position, including plain next
episodes, so the Emby resume leg reads from `/Items?Filters=IsResumable`.
- Emby is ahead of Jellyfin in one place: `/Users/{id}/Items/{id}/HideFromResume`
makes Continue Watching removal a real capability.
Everything else
- `/Sessions/Playing` and `/Sessions/Playing/Progress` reject a body with no
`PlaySessionId` (HTTP 400), so playback reporting always sends one.
- Passing any `MediaTypes` value to the playlist query returns an empty list.
- There is no aggregate `/Items/Filters` route; the four filter facets are
reassembled from `/Genres`, `/OfficialRatings`, `/Studios` and `/Tags`.
- Metadata writes take name-pair lists (`Genres: [{'Name': 'Action'}]`); the
plain string array is accepted and then silently discarded.
- Custom artwork uploads must be base64 text, not raw bytes — which was broken
for Jellyfin too and is fixed for both.
- Trickplay, media segments and lyrics 404 on Emby, so scrub previews are absent
and intro/credit markers fall back to chapter names.
Verified against a local Emby 4.9.5 and a Jellyfin 10.11.11 control server:
onboarding, browse, detail, playable stream URLs serving real bytes, subtitle
sidecars, watch-state write and restore, hubs, cross-server aggregation and
search across both backends simultaneously.
`dart format --set-exit-if-changed` over lib and test rewrites these.
The analysis job never reached its formatting step, so the drift went
unnoticed. No behaviour changes.
Consolidates duplicated logic behind shared implementations — paginated
grid tabs, focus chrome, cached remote stores, sheet selection columns,
the server artifact store and a test fixture layer — and removes code
that had become unreachable. Net reduction of about 5,500 lines with no
behaviour change.
Where a fix had landed separately in code that moved into a shared
helper, the fix was re-applied inside the helper rather than left behind
in the copy that went away.
Deduplicates the hand-rolled coalescing/caching maps, the Plex client cast,
the missing-serverId event guard and the progress-failure backoff, and drops
the MusicPlaybackService availability gate, which could never fail in
production.
Focus chrome was implemented twice, once in the focusable wrapper and once
in the focus builders; both now go through FocusChrome. TvColorPicker's
channel row was a copy of TvNumberSpinner and is now that widget in compact
density.
Also trims unused helpers and fields and simplifies the Jellyfin browse
paths.
- PaginatedCardGridTabState: the collections and playlists tabs were 95%
identical; they now supply only pageSize/fetchPage/idOf instead of each
duplicating the grid, memo, inflation budget and focus wiring.
- EtagCachedRemoteStore: the anime-lists and fribb mapping stores now share
one download/cache/isolate-parse/conditional-GET lifecycle.
- FocusableTileStateMixin manages its own initState/didUpdateWidget/dispose
instead of requiring every caller to forward three lifecycle hooks.
Also drops unused ServerCapabilities entries and dead code in
focusable_list_tile and music/track_row.
Introduces shared seams for paginated views, D-pad reorder, media control
routing, async singletons and the device method channel, then points the
open-coded copies at them.
Also removes unused models and duplicated provider/server plumbing, folds
the twice-implemented artifact store in the server, and factors the
repeated Flutter toolchain prologue in CI into a composite action.
Shared TabChipStrip replaces the plain Rows in libraries/downloads/live
TV app bars (and live TV's hand-rolled scroll wrapper); chips center
themselves on focus so d-pad reaches off-screen tabs.
Un-gates music libraries; adds CardShape.square plumbing (circular
artists), artists/albums/tracks browse groupings with per-grouping
sorts, audio playlists tab, artist + album detail screens with dpad
track rows, music context-menu actions, and a stub MusicPlaybackService
seam for the upcoming engine.
Extract the manage/reorder-libraries sheet from the libraries screen into
a shared widget with a public launcher, and add a settings tile (top
group, gated on having libraries) that opens it. The libraries screen
keeps its side-nav refresh and re-select-on-hide behavior via launcher
hooks; the TV dialog path lives in the launcher so the entry works there
too.
Desktop overlay sheets defaulted to a fixed 400px max height, which left
the reorder sheet ~280px tall. Both default-constraint sites now use 75%
of window height, matching mobile.
close#1468
The library Recommended tab never subscribed to deletion events, so
"Delete from server" left the episode sitting in Continue Watching
until a full reload. Make the tab DeletionAware (remove in place across
all hubs, then resync) and give DiscoverProvider the same subscription
so the home row and hubs drop deleted items too.
close#1486
Profile traces showed 100-370ms UI-thread frames while scrolling the
library screen, dominated by rebuilding and inflating media cards.
- Gate per-card focus/pointer chrome on input mode: FocusableWrapper
skips the scale/border wrappers and creates its AnimationController
lazily outside keyboard mode, and ClickableCursor plus the card tap
region only build MouseRegion/InkWell machinery on desktop - TV and
touch use a bare GestureDetector. Hub cards also drop their outer
gesture wrapper outside keyboard mode; the card's own tap region
always won the gesture arena anyway.
- Memoize sliver children (SliverChildMemo): browse/collections grids
and hub rows return identical widget instances for unchanged items,
so delegate swaps from pagination, watch-state, and deletion
setStates no longer rebuild every realized card inside layout. The
browse tab prunes the memo in lockstep with focus-node eviction so a
cached card can never resurrect a disposed FocusNode.
- Budget fresh inflation (CardInflationBudget): while a scrollable is
moving in pointer/touch mode at most one new card inflates per frame,
the rest render as SkeletonMediaCard and upgrade on following frames.
Hub rows also stop pre-inflating 250px of off-screen cards on entry.
Device traces: worst frame 373ms -> 103ms, per-card build 3.6ms ->
2.4ms median; remaining row-entry work is spread across frames.
Badge the mobile Library options icon with a dot while filters are
active, and replace the "This library is empty" state with a
"No items match the active filters" message plus a reset button.
close#1470
Poster images are decorative (the card exposes one merged node), and
the default per-child AutomaticKeepAlive/_SelectionKeepAlive/
IndexedSemantics wrappers are inert here — no keep-alive clients or
SelectionArea exist. The semantics phase ran ~9ms every frame on TV
devices with an accessibility service; it scales with node count.
edde746