### Purpose
There were some additional regression created during #10563 and #10631 which are:
* Folders were not being ordered by their label within their group
* Local device could still show up randomly with the list of remote devices
The respective fixes in this PR does the following:
* Ensure sorting of the grouped folders (and devices) are done by group name (the top level map key) and then by the specified nested object property or a fallback property if specified property value is empty. So in the case of the folders it's `label` and device is `name`.
* When populating the `devicesGrouped` using `$scope.otherDevices`, do this within a watcher on `$scope.myID` as this is what `$scope.otherDevices` relies on to determine what is a remote device. This is required because `$scope.myID` might not be populated yet given the indeterministic call order being made to `refreshSystem` and `refreshConfig`.
### Testing
Populate folders and devices into different groups, and ensure the ordering is correct and the local device is not showing in remote devices even after many, many refreshes on the UI or restarts of syncthing entirely.
### Screenshots
Before the fix
<img width="1108" height="951" alt="Screenshot_20260409_083910" src="https://github.com/user-attachments/assets/6eb8cacc-5924-4612-aa70-29ed4f691233" />
After the fix
<img width="1090" height="934" alt="Screenshot_20260409_084553" src="https://github.com/user-attachments/assets/f5b74391-228a-43d3-b5ee-433958236d84" />
### Documentation
N/A
## Authorship
Ben Norcombe [bennorcombe@pm.me](mailto:bennorcombe@pm.me)
IMHO the logic here was inverted. The only use for the report data is to
show a preview when we ask the user whether they want to participate in
usage reporting. However, the GUI would first load the report data and
then consider whether we wanted to show that dialog or not. Instead,
only load if it we're going to show the dialog.
Signed-off-by: Jakob Borg <jakob@kastelo.net>
This updates our logging framework from legacy freetext strings using
the `log` package to structured log entries using `log/slog`. I have
updated all INFO or higher level entries, but not yet DEBUG (😓)... So,
at a high level:
There is a slight change in log levels, effectively adding a new warning
level:
- DEBUG is still debug (ideally not for users but developers, though
this is something we need to work on)
- INFO is still info, though I've added more data here, effectively
making Syncthing more verbose by default (more on this below)
- WARNING is a new log level that is different from the _old_ WARNING
(more below)
- ERROR is what was WARNING before -- problems that must be dealt with,
and also bubbled as a popup in the GUI.
A new feature is that the logging level can be set per package to
something other than just debug or info, and hence I feel that we can
add a bit more things into INFO while moving some (in fact, most)
current INFO level warnings into WARNING. For example, I think it's
justified to get a log of synced files in INFO and sync failures in
WARNING. These are things that have historically been tricky to debug
properly, and having more information by default will be useful to many,
while still making it possible get close to told level of inscrutability
by setting the log level to WARNING. I'd like to get to a stage where
DEBUG is never necessary to just figure out what's going on, as opposed
to trying to narrow down a likely bug.
Code wise:
- Our logging object, generally known as `l` in each package, is now a
new adapter object that provides the old API on top of the newer one.
(This should go away once all old log entries are migrated.) This is
only for `l.Debugln` and `l.Debugf`.
- There is a new level tracker that keeps the log level for each
package.
- There is a nested setup of handlers, since the structure mandated by
`log/slog` is slightly convoluted (imho). We do this because we need to
do formatting at a "medium" level internally so we can buffer log lines
in text format but with separate timestamp and log level for the API/GUI
to consume.
- The `debug` API call becomes a `loglevels` API call, which can set the
log level to `DEBUG`, `INFO`, `WARNING` or `ERROR` per package. The GUI
is updated to handle this.
- Our custom `sync` package provided some debugging of mutexes quite
strongly integrated into the old logging framework, only turned on when
`STTRACE` was set to certain values at startup, etc. It's been a long
time since this has been useful; I removed it.
- The `STTRACE` env var remains and can be used the same way as before,
while additionally permitting specific log levels to be specified,
`STTRACE=model:WARN,scanner:DEBUG`.
- There is a new command line option `--log-level=INFO` to set the
default log level.
- The command line options `--log-flags` and `--verbose` go away, but
are currently retained as hidden & ignored options since we set them by
default in some of our startup examples and Syncthing would otherwise
fail to start.
Sample format messages:
```
2009-02-13 23:31:30 INF A basic info line (attr1="val with spaces" attr2=2 attr3="val\"quote" a=a log.pkg=slogutil)
2009-02-13 23:31:30 INF An info line with grouped values (attr1=val1 foo.attr2=2 foo.bar.attr3=3 a=a log.pkg=slogutil)
2009-02-13 23:31:30 INF An info line with grouped values via logger (foo.attr1=val1 foo.attr2=2 a=a log.pkg=slogutil)
2009-02-13 23:31:30 INF An info line with nested grouped values via logger (bar.foo.attr1=val1 bar.foo.attr2=2 a=a log.pkg=slogutil)
2009-02-13 23:31:30 WRN A warning entry (a=a log.pkg=slogutil)
2009-02-13 23:31:30 ERR An error (a=a log.pkg=slogutil)
```
---------
Co-authored-by: Ross Smith II <ross@smithii.com>
* main:
build: use specific token for pushing release tags
fix(gui): update `uncamel()` to handle strings like 'IDs' (fixes#10128) (#10131)
refactor: use slices package for sort (#10132)
build: process for automatic release tags (#10133)
chore(gui, man, authors): update docs, translations, and contributors
> ⚠️ resubmission targeting `main` instead of `v2`
### Purpose
Updates `uncamel()` function in
[uncamelFilter.js](https://github.com/syncthing/syncthing/blob/v2/gui/default/syncthing/core/uncamelFilter.js)
to fix camelCase conversion edge cases, see #10128
This adds an array called `reservedStrings` which will be printed as-is,
e.g. `IDs`, `LAN` etc. I pre-populated this with what I believe makes
sense, but of course this is easily updated.
### Testing
I compiled all the config variables I could find in
`syncthing/lib/config/*configuration.go` and tested this new function
against them. Everything seemed to pass.
### Screenshot
### Purpose
As stated in #9489 after clicking on a tab link to switch tabs in a
modal you can no longer close the modal through clicking the ESC key
unless you click anywhere on the modal to focus on it again.
### Testing
- Click on a modal that has tabs like "Settings" or "Add Folder" and
switch tabs then click on ESC.
- Check if clicking outside of a modal in the backdrop should still
close the modal.
### Demo
https://github.com/user-attachments/assets/a010db9a-72f7-4160-a7db-ddfebffb4834
Currently, the "Disconnected (Inactive)" status is only given to devices
that have not been seen for 7 days or longer. However, this is not the
case when adding a new device, or after resetting the database. Those
devices are only marked as "Disconnected", and they will stay like that
even if a long time passes without any connectivity. Moreover, the lack
of an "Inactive" status may confuse the user to believe that their
disconnect is only temporary.
For this reason, always mark devices that have not been seen yet as
"Disconnected (Inactive)".
Signed-off-by: Tomasz Wilczyński <twilczynski@naver.com>
### Purpose
In the GUI, the device ID validation was case-sensitive and didn’t
account for dash variations, which allowed users to enter an existing
device ID without receiving proper feedback.
This fix ensures the ID is validated in its canonical form, thus
preventing the user from submitting the request if the device ID already
exists.
### Testing
To test this change, try adding a new device with an ID that matches an
existing device, but with a different case or dashes.
At a high level, this is what I've done and why:
- I'm moving the protobuf generation for the `protocol`, `discovery` and
`db` packages to the modern alternatives, and using `buf` to generate
because it's nice and simple.
- After trying various approaches on how to integrate the new types with
the existing code, I opted for splitting off our own data model types
from the on-the-wire generated types. This means we can have a
`FileInfo` type with nicer ergonomics and lots of methods, while the
protobuf generated type stays clean and close to the wire protocol. It
does mean copying between the two when required, which certainly adds a
small amount of inefficiency. If we want to walk this back in the future
and use the raw generated type throughout, that's possible, this however
makes the refactor smaller (!) as it doesn't change everything about the
type for everyone at the same time.
- I have simply removed in cold blood a significant number of old
database migrations. These depended on previous generations of generated
messages of various kinds and were annoying to support in the new
fashion. The oldest supported database version now is the one from
Syncthing 1.9.0 from Sep 7, 2020.
- I changed config structs to be regular manually defined structs.
For the sake of discussion, some things I tried that turned out not to
work...
### Embedding / wrapping
Embedding the protobuf generated structs in our existing types as a data
container and keeping our methods and stuff:
```
package protocol
type FileInfo struct {
*generated.FileInfo
}
```
This generates a lot of problems because the internal shape of the
generated struct is quite different (different names, different types,
more pointers), because initializing it doesn't work like you'd expect
(i.e., you end up with an embedded nil pointer and a panic), and because
the types of child types don't get wrapped. That is, even if we also
have a similar wrapper around a `Vector`, that's not the type you get
when accessing `someFileInfo.Version`, you get the `*generated.Vector`
that doesn't have methods, etc.
### Aliasing
```
package protocol
type FileInfo = generated.FileInfo
```
Doesn't help because you can't attach methods to it, plus all the above.
### Generating the types into the target package like we do now and
attaching methods
This fails because of the different shape of the generated type (as in
the embedding case above) plus the generated struct already has a bunch
of methods that we can't necessarily override properly (like `String()`
and a bunch of getters).
### Methods to functions
I considered just moving all the methods we attach to functions in a
specific package, so that for example
```
package protocol
func (f FileInfo) Equal(other FileInfo) bool
```
would become
```
package fileinfos
func Equal(a, b *generated.FileInfo) bool
```
and this would mostly work, but becomes quite verbose and cumbersome,
and somewhat limits discoverability (you can't see what methods are
available on the type in auto completions, etc). In the end I did this
in some cases, like in the database layer where a lot of things like
`func (fv *FileVersion) IsEmpty() bool` becomes `func fvIsEmpty(fv
*generated.FileVersion)` because they were anyway just internal methods.
Fixes#8247
### Purpose
This closes#9400 by always expanding tildes when parent/subdir checks
are done.
### Testing
I tested this by creating folders with paths to parent or subdirectories
of the default folder that include a tilde in their path as shown in the
attached screenshots.
With this change, overlap will be detected regardless of wether or not
tildes are used in other folder paths.
### Screenshots
Default Folder:
Newly created folder (parent directory in this case)
---------
Signed-off-by: tobifroe <froeltob@pm.me>
As discussed in
https://github.com/syncthing/syncthing/pull/9175#discussion_r1730431703,
entries in advanced settings are unusable if they are comprised of a
list of objects. It just displays `[object Object], [object Object],
[object Object]`, e.g. for the devices a folder is shared with.
Filter out these config elements by detecting an array whose members are
not all strings or numbers, and setting them to `skip` type.
Fix some unnecessary repetition in calling `inputTypeFor()`, since it is
already cached in the `ng-init` directive.
