fix(player): snap Android MediaCodec frames to display vsync

fix(player): stop subtitle updates from dropping video frames on the mpv Android backend
With the mpv backend on Android, every subtitle change cost two dropped video frames on a Fire TV Cube (36 per minute with PGS SDH subtitles, 15 with srt, #2240) and accounts for the residual drops on the Shield in #2202, whose sessions also had subtitles on. The diagnostic build showed the drops in pairs: a frame handed over on time, then the video thread waking 90-100 ms late. vo_mediacodec rasterized subtitles and blitted them into the OSD Surface on that thread, and locking the Surface waits CPU-side for the compositor - dequeue plus the release fence, one or two vsyncs, 42-83 ms at 23.976 Hz. Kodi, VLC 4 and ExoPlayer all keep subtitle output off the presentation thread. Move the native pin to edde746/mpv-build@88c1b135e7: the whole OSD stage runs on its own thread, fed with the video pts at every flip, so the video thread never waits on the compositor or on libass. Subtitles latch on the same vsync as the video in the common case and one later when the lock has to wait. Shield on vo=mediacodec with ASS subtitles: no video-thread stage over 10 ms and 0 drops across five 150 s runs, subtitles verified on screen; DTS-HD MA 4K unchanged at 0 drops. The pin keeps the #2202 diagnostics and adds VO stage timing to them. Apple, Linux and Windows assets are unchanged.
2026-09-04 12:02:39 +02:00 · 2026-09-04 06:14:18 +02:00 · 2026-09-04 01:58:34 +02:00 · 2026-09-03 23:54:09 +02:00 · 2026-09-03 23:47:27 +02:00 · 2026-09-03 21:42:47 +02:00
582 changed files with 47907 additions and 11245 deletions
@@ -414,9 +414,7 @@ jobs:
          - arch: arm64
            runner: windows-11-arm
            flutter_setup: git
-            native_cache_path: |
-              build/windows/arm64/_deps
-              build/windows/arm64/mpv-dev-arm64
+            native_cache_path: build/windows/arm64/_deps
    steps:
      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7
        with:
@@ -427,12 +425,7 @@ jobs:
        uses: actions/cache@55cc8345863c7cc4c66a329aec7e433d2d1c52a9 # v6
        with:
          path: ${{ matrix.native_cache_path }}
-          key: ${{ env.TRUSTED_BUILD_CACHE_VERSION }}-windows-native-${{ matrix.arch }}-${{ hashFiles('windows/CMakeLists.txt') }}
-
-      - name: Install 7-Zip
-        if: matrix.arch == 'arm64' && steps.windows-native-cache.outputs.cache-hit != 'true'
-        shell: pwsh
-        run: choco install 7zip -y
+          key: ${{ env.TRUSTED_BUILD_CACHE_VERSION }}-windows-native-${{ matrix.arch }}-${{ hashFiles('windows/CMakeLists.txt', 'mpv-build.lock.json') }}

      - name: Setup Flutter
        if: matrix.flutter_setup == 'action'
@@ -585,10 +578,10 @@ jobs:

      - name: Read version from pubspec
        id: version
-        shell: pwsh
+        shell: bash
        run: |
-          $v = (Select-String -Path pubspec.yaml -Pattern '^version:\s*(\S+)').Matches[0].Groups[1].Value -replace '\+.*'
-          echo "version=$v" >> $env:GITHUB_OUTPUT
+          VERSION=$(python3 scripts/pubspec_version.py pubspec.yaml)
+          echo "version=${VERSION%%+*}" >> "$GITHUB_OUTPUT"

      - name: Build installer and portables
        run: .\windows\build-installer.ps1 -X64BuildDir "build-x64" -Arm64BuildDir "build-arm64" -Version "${{ steps.version.outputs.version }}"
@@ -725,17 +718,26 @@ jobs:

          exit 1

-      - name: Cache libmpv build
+      - name: Cache libmpv prefix
        id: libmpv-cache
        uses: actions/cache@55cc8345863c7cc4c66a329aec7e433d2d1c52a9 # v6
        with:
          path: libmpv-prefix
-          key: ${{ env.TRUSTED_BUILD_CACHE_VERSION }}-libmpv-${{ runner.arch }}-${{ hashFiles('linux/packaging/build-libmpv.sh', 'linux/packaging/native-inputs.json') }}
+          key: ${{ env.TRUSTED_BUILD_CACHE_VERSION }}-libmpv-${{ runner.arch }}-${{ hashFiles('mpv-build.lock.json') }}

-      - name: Build libmpv
+      # The prebuilt prefix from our unified mpv-build repo: the script reads
+      # the asset and expected SHA-256 from the lock and verifies the bytes
+      # before a single one is extracted. The tarball is a self-relocating
+      # prefix tree (lib/ or lib/<triplet>/ with the libmpv.so* chain,
+      # lib/libshaderc_shared.so*, include/, and pkgconfig/ dirs with
+      # ${pcfiledir}-relative roots), so the downstream PKG_CONFIG_PATH,
+      # bundle-copy, and find steps are unchanged.
+      - name: Fetch libmpv
        if: steps.libmpv-cache.outputs.cache-hit != 'true'
        shell: bash
-        run: bash linux/packaging/build-libmpv.sh
+        run: |
+          command -v zstd >/dev/null 2>&1 || { sudo apt-get update && sudo apt-get install -y --no-install-recommends zstd; }
+          python3 scripts/fetch_linux_libmpv.py --dest libmpv-prefix

      - name: Install fpm
        shell: bash
@@ -872,15 +874,18 @@ jobs:
    steps:
      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7
        with:
-          sparse-checkout: pubspec.yaml
+          sparse-checkout: |
+            pubspec.yaml
+            scripts/pubspec_version.py
          sparse-checkout-cone-mode: false
          persist-credentials: false

      - name: Read version from pubspec.yaml
        id: version
        run: |
-          VERSION=$(grep '^version:' pubspec.yaml | sed 's/version: //' | sed 's/+.*//')
-          BUILD_NUMBER=$(grep '^version:' pubspec.yaml | sed 's/.*+//')
+          VERSION=$(python3 scripts/pubspec_version.py pubspec.yaml)
+          BUILD_NUMBER=${VERSION#*+}
+          VERSION=${VERSION%%+*}
          echo "version=$VERSION" >> $GITHUB_OUTPUT
          echo "build_number=$BUILD_NUMBER" >> $GITHUB_OUTPUT

@@ -252,9 +252,6 @@ jobs:
      - name: Verify native formatting
        run: scripts/format_native.sh --check

-      - name: Verify Linux native acquisition and build plan
-        run: bash linux/packaging/build-libmpv_test.sh
-
  linux-native-test:
    name: Linux native reliability (${{ matrix.sanitizer }})
    runs-on: ubuntu-latest
@@ -404,7 +401,9 @@ jobs:

      - name: Verify tvOS project wiring
        if: matrix.platform == 'tvOS'
-        run: ruby tvos/scripts/test_wire_mpv.rb
+        run: |
+          ruby tvos/scripts/test_wire_mpv.rb
+          ruby tvos/scripts/test_wire_top_shelf.rb

      - name: Select Apple test destination
        env:
@@ -645,10 +644,10 @@ jobs:
          cache: true
          pub-cache: false

-      # The packaging deps, minus libmpv: this job builds it from source below,
-      # because the distro's is a different version with different windowing
-      # backends, and a package smoke-built against it cannot show that
-      # build-libmpv.sh still works or that the bundle it produces is coherent.
+      # The packaging deps, minus libmpv: that arrives prebuilt from mpv-build
+      # below. The dev packages still matter — they install the runtime
+      # libraries the pinned libmpv links (ass, pulse, pipewire, ...), which
+      # bundle-libs.sh resolves off the host into the bundle.
      - name: Install packaging dependencies
        run: |
          sudo apt-get update
@@ -662,25 +661,29 @@ jobs:
            liblua5.2-dev rpm libarchive-tools imagemagick ruby-dev build-essential
          sudo gem install fpm --version 1.17.0 --no-document

-      # Keyed the same way build.yml keys it, so editing the script or its pinned
-      # inputs is what invalidates the cache - and this branch's whole point is
-      # that those edits get exercised somewhere.
-      - name: Cache libmpv build
+      # Keyed the same way build.yml keys it: the lock names the asset and its
+      # checksum, so editing the lock is what invalidates the cache.
+      - name: Cache libmpv prefix
        id: libmpv-cache
        uses: actions/cache@55cc8345863c7cc4c66a329aec7e433d2d1c52a9 # v6
        with:
          path: libmpv-prefix
-          key: ci-libmpv-${{ runner.arch }}-${{ hashFiles('linux/packaging/build-libmpv.sh', 'linux/packaging/native-inputs.json') }}
+          key: ci-libmpv-${{ runner.arch }}-${{ hashFiles('mpv-build.lock.json') }}

-      - name: Build libmpv
+      # Same contract as build.yml: the script reads mpv-build.lock.json,
+      # downloads the linux asset for this arch, verifies its SHA-256, and
+      # extracts the prefix tree.
+      - name: Fetch libmpv
        if: steps.libmpv-cache.outputs.cache-hit != 'true'
-        run: bash linux/packaging/build-libmpv.sh
+        run: |
+          command -v zstd >/dev/null 2>&1 || { sudo apt-get update && sudo apt-get install -y --no-install-recommends zstd; }
+          python3 scripts/fetch_linux_libmpv.py --dest libmpv-prefix

-      # The windowing backends the runner depends on, read off the library the
-      # script just produced. The plane hands mpv MPV_RENDER_PARAM_WL_DISPLAY, so
-      # a libmpv without Wayland cannot find the VAAPI device and quietly decodes
-      # in software; X11 and VDPAU are gone with the texture path.
-      - name: Check the built libmpv's backends
+      # The windowing backends the runner depends on, read off the pinned
+      # library just extracted. The plane hands mpv MPV_RENDER_PARAM_WL_DISPLAY,
+      # so a libmpv without Wayland cannot find the VAAPI device and quietly
+      # decodes in software; X11 and VDPAU are gone with the texture path.
+      - name: Check the pinned libmpv's backends
        run: |
          LIB=$(find libmpv-prefix -name 'libmpv.so.2' | head -1)
          echo "== $LIB =="
@@ -1,6 +1,6 @@
 cask "plezy" do
-  version "2.17.0"
-  sha256 "318b9ac0ff0d239b3edbad57a44c008e7aaf0c5623bc2c595407fce2987ba5e4"
+  version "2.18.0"
+  sha256 "affa0922fb33b6ca79a0d6ce7e5042539097a0ea097f011c9a4cfdbe0e822f94"

  url "https://github.com/edde746/plezy/releases/download/#{version}/plezy-macos.dmg"
  name "Plezy"
@@ -205,4 +205,4 @@ Plezy is licensed under [GPL-3.0](LICENSE).

 - Built with [Flutter](https://flutter.dev)
 - Supports [Plex Media Server](https://www.plex.tv), [Jellyfin](https://jellyfin.org), and [Emby](https://emby.media)
- Playback powered by [mpv](https://mpv.io), [MPVKit](https://github.com/mpvkit/MPVKit), Android [ExoPlayer](https://developer.android.com/media/media3/exoplayer), [libass-android](https://github.com/peerless2012/libass-android), and [libmpv-android](https://github.com/jarnedemeulemeester/libmpv-android)
+- Playback powered by [mpv](https://mpv.io) via our [mpv-build](https://github.com/edde746/mpv-build) pipeline (started as a fork of [MPVKit](https://github.com/mpvkit/MPVKit); the Android Kotlin/JNI glue descends from [libmpv-android](https://github.com/jarnedemeulemeester/libmpv-android)), Android [ExoPlayer](https://developer.android.com/media/media3/exoplayer), and [libass-android](https://github.com/peerless2012/libass-android)
@@ -58,82 +58,31 @@ plugins {
  id("dev.flutter.flutter-gradle-plugin")
 }

-val mpvVersion = "v1.0.7"
-val mpvSha256 = "d55d440e587b2a9ffb91874d93069460a987be05fe72af8394849983f0df2d7a"
-val mpvDir = layout.buildDirectory.dir("libmpv").get().asFile
-val mpvAar = "libmpv-release.aar"
-val mpvUrl = "https://github.com/edde746/libmpv-android/releases/download/$mpvVersion/$mpvAar"
+// The in-project :libmpv module owns the mpv-build pin (repo-root
+// mpv-build.lock.json assets + checksums, plus the plezy.localMpvDir/
+// PLEZY_LOCAL_MPV_DIR escape hatch) and extracts the per-ABI tarballs'
+// prebuilt native libraries. This file reads two of its output trees
+// back: FFmpeg .so files for the Media3 adapter link step, and the libc++
+// runtime packaged at PROJECT scope below.
+val libmpvBuildDir = project(":libmpv").layout.buildDirectory.dir("libmpv").get().asFile
+val libmpvNativeJniDir = File(libmpvBuildDir, "native/jni")
+val libmpvLibcxxJniDir = File(libmpvBuildDir, "libcxx/jni")

 val media3Version = "1.11.0"
 val mpvFfmpegVersion = "8.0.1"
 val mpvFfmpegSourceSha256 = "05ee0b03119b45c0bdb4df654b96802e909e0a752f72e4fe3794f487229e5a41"
 val mpvFfmpegSourceUrl = "https://ffmpeg.org/releases/ffmpeg-$mpvFfmpegVersion.tar.xz"
-val mpvFfmpegDevelopmentDir = File(mpvDir, "ffmpeg-development")
-
-val downloadLibmpv = tasks.register("downloadLibmpv") {
-  val aar = File(mpvDir, mpvAar)
-  val manifest = File(mpvDir, ".manifest")
-  inputs.property("version", mpvVersion)
-  inputs.property("sourceUrl", mpvUrl)
-  inputs.property("sha256", mpvSha256)
-  outputs.files(aar, manifest)
-  doLast {
-    mpvDir.parentFile.mkdirs()
-    val staging = File(mpvDir.parentFile, "${mpvDir.name}.staging-${UUID.randomUUID()}")
-    try {
-      staging.mkdirs()
-      val stagedAar = File(staging, mpvAar)
-      try {
-        providers.exec {
-          commandLine("curl", "-sfL", mpvUrl, "-o", stagedAar.absolutePath)
-        }.result.get().assertNormalExitValue()
-      } catch (error: Exception) {
-        throw GradleException("Failed to download $mpvAar $mpvVersion", error)
-      }
-      verifySha256(stagedAar, mpvSha256, "$mpvAar $mpvVersion")
-      File(staging, ".manifest").writeText("version=$mpvVersion\nsha256=$mpvSha256\n")
-      promoteDirectory(staging, mpvDir)
-    } finally {
-      staging.deleteRecursively()
-    }
-  }
-}
-
-// Extract libc++_shared.so from the libmpv AAR so the app source set can package
-// it with top merge priority (see packaging { jniLibs } and sourceSets below).
-val extractMpvLibcxx = tasks.register("extractMpvLibcxx") {
-  dependsOn(downloadLibmpv)
-  val aar = File(mpvDir, mpvAar)
-  val outDir = File(mpvDir, "libcxx")
-  inputs.file(aar)
-  outputs.dir(outDir)
-  doLast {
-    outDir.deleteRecursively() // drop stale ABIs from a previous AAR version
-    outDir.mkdirs()
-    providers.exec {
-      commandLine(
-        "unzip",
-        "-q",
-        "-o",
-        aar.absolutePath,
-        "jni/*/libc++_shared.so",
-        "-d",
-        outDir.absolutePath
-      )
-    }.result.get().assertNormalExitValue()
-  }
-}
+val mpvFfmpegDevelopmentDir = layout.buildDirectory.dir("libmpv-ffmpeg-development").get().asFile

 // Build the Media3 JNI adapter against the same shared FFmpeg libraries that
 // libmpv packages. Headers are pinned to libmpv's FFmpeg version and remain
 // build-only; the APK contains one FFmpeg implementation for both players.
 val prepareMpvFfmpegDevelopment = tasks.register("prepareMpvFfmpegDevelopment") {
-  dependsOn(downloadLibmpv)
-  val aar = File(mpvDir, mpvAar)
+  dependsOn(":libmpv:extractLibmpvNative")
  val manifest = File(mpvFfmpegDevelopmentDir, ".manifest")
  val abis = listOf("arm64-v8a", "armeabi-v7a", "x86", "x86_64")
-  val libraries = listOf("avcodec", "avformat", "avutil", "swresample")
-  inputs.file(aar)
+  val libraries = listOf("avcodec", "avutil", "swresample")
+  inputs.dir(libmpvNativeJniDir)
  inputs.property("ffmpegVersion", mpvFfmpegVersion)
  inputs.property("sourceUrl", mpvFfmpegSourceUrl)
  inputs.property("sourceSha256", mpvFfmpegSourceSha256)
@@ -145,7 +94,6 @@ val prepareMpvFfmpegDevelopment = tasks.register("prepareMpvFfmpegDevelopment")
  outputs.files(
    File(mpvFfmpegDevelopmentDir, "include/libavcodec/avcodec.h"),
    File(mpvFfmpegDevelopmentDir, "include/libavutil/avconfig.h"),
-    File(mpvFfmpegDevelopmentDir, "include/libavformat/avformat.h"),
    File(mpvFfmpegDevelopmentDir, "include/libswresample/swresample.h"),
    manifest
  )
@@ -183,7 +131,7 @@ val prepareMpvFfmpegDevelopment = tasks.register("prepareMpvFfmpegDevelopment")
      } catch (error: Exception) {
        throw GradleException("Failed to extract FFmpeg $mpvFfmpegVersion headers", error)
      }
-      listOf("libavcodec", "libavformat", "libavutil", "libswresample").forEach { library ->
+      listOf("libavcodec", "libavutil", "libswresample").forEach { library ->
        project.copy {
          from(File(extractedSource, library)) {
            include("*.h")
@@ -204,16 +152,12 @@ val prepareMpvFfmpegDevelopment = tasks.register("prepareMpvFfmpegDevelopment")
      )

      project.copy {
-        from(zipTree(aar)) {
+        from(libmpvNativeJniDir) {
          include(
-            "jni/*/libavcodec.so",
-            "jni/*/libavformat.so",
-            "jni/*/libavutil.so",
-            "jni/*/libswresample.so"
+            "*/libavcodec.so",
+            "*/libavutil.so",
+            "*/libswresample.so"
          )
-          eachFile {
-            path = path.removePrefix("jni/")
-          }
        }
        includeEmptyDirs = false
        into(nativeDir)
@@ -224,11 +168,11 @@ val prepareMpvFfmpegDevelopment = tasks.register("prepareMpvFfmpegDevelopment")
      }.filterNot(File::isFile)
      if (missing.isNotEmpty()) {
        throw GradleException(
-          "libmpv $mpvVersion is missing FFmpeg libraries: ${missing.joinToString { it.relativeTo(staging).path }}"
+          "the :libmpv prebuilt tree is missing FFmpeg libraries: ${missing.joinToString { it.relativeTo(staging).path }}"
        )
      }
      File(staging, ".manifest").writeText(
-        "mpv=$mpvVersion\nffmpeg=$mpvFfmpegVersion\nsourceSha256=$mpvFfmpegSourceSha256\n"
+        "ffmpeg=$mpvFfmpegVersion\nsourceSha256=$mpvFfmpegSourceSha256\n"
      )
      sourceArchive.delete()
      extractedSource.deleteRecursively()
@@ -338,7 +282,7 @@ android {

  defaultConfig {
    applicationId = "com.edde746.plezy"
-    minSdk = 25 // Fire OS 6.x (API 25); overrides libmpv-android's minSdk=26
+    minSdk = 25 // Fire OS 6.x (API 25); :libmpv shares the same floor
    targetSdk = flutter.targetSdkVersion
    versionCode = flutter.versionCode
    versionName = flutter.versionName
@@ -437,8 +381,9 @@ android {
  packaging {
    jniLibs {
      // pickFirst only suppresses the duplicate libc++ merge error; the
-      // sourceSets rule below makes libmpv's newer runtime win for
-      // std::from_chars<float>, while older native consumers remain ABI-compatible.
+      // sourceSets rule below makes the runtime :libmpv extracts from the
+      // mpv-build tarballs win for std::from_chars<float>, while older
+      // native consumers remain ABI-compatible.
      pickFirsts.add("lib/*/libc++_shared.so")
    }
  }
@@ -446,8 +391,10 @@ android {
  sourceSets {
    getByName("main") {
      // PROJECT-scope jniLibs merge ahead of subprojects/AARs, so dependency
-      // order cannot accidentally select the older libc++ copy.
-      jniLibs.srcDir(File(mpvDir, "libcxx/jni"))
+      // order cannot accidentally select an older libc++ copy. The directory
+      // is :libmpv's extractLibmpvNative output (the tarballs' 16 KB-capable
+      // libc++), wired below via the JniLibFolders dependency.
+      jniLibs.srcDir(libmpvLibcxxJniDir)
    }
  }

@@ -503,16 +450,18 @@ tasks.matching { it.name.contains("CMake") || it.name.contains("externalNative")
 }

 tasks.matching { it.name.startsWith("pre") && it.name.endsWith("Build") }.configureEach {
-  dependsOn(downloadLibmpv, extractMpvLibcxx, prepareMpvFfmpegDevelopment)
+  dependsOn(prepareMpvFfmpegDevelopment)
 }
 // Gradle snapshots jniLibs source dirs before task execution; this keeps the
 // extracted libmpv libc++ directory present during input discovery.
 tasks.matching { it.name.startsWith("merge") && it.name.endsWith("JniLibFolders") }.configureEach {
-  dependsOn(extractMpvLibcxx)
+  dependsOn(":libmpv:extractLibmpvNative")
 }

 dependencies {
-  implementation(files(File(mpvDir, mpvAar)))
+  // mpv Kotlin API + JNI glue live in-project; the prebuilt libmpv/FFmpeg .so
+  // set rides along from the module's extracted mpv-build tarballs.
+  implementation(project(":libmpv"))
  implementation("org.jetbrains.kotlinx:kotlinx-coroutines-android:1.11.0")

  // Android TV Watch Next integration
@@ -19,13 +19,19 @@
 # growOutputBuffer's JNI descriptor names this type, so it may not be renamed either.
 -keep class androidx.media3.decoder.SimpleDecoderOutputBuffer { *; }

-# ffmpeg_demuxer_jni.cc resolves the AVIO input proxy's callbacks by name
-# (FindClass on the interface, GetMethodID for position/read/readAt/length).
-# Keeping the interface members pins the names on every implementation,
-# including the anonymous proxy inside FfmpegExtractor.
-keep interface com.edde746.plezy.exoplayer.FfmpegDemuxerJni$Input {
-  long position();
-  int read(byte[], int);
-  int readAt(long, byte[], int);
-  long length();
+# MatroskaExtractor.init is final and its ExtractorOutput / subtitle scratch buffer live
+# in private fields, so the extractor wrappers reach both by name: AssMatroskaExtractor
+# (android/libass/.../media/extractor/AssMatroskaExtractor.kt) resolves extractorOutput
+# and subtitleSample with getDeclaredField to redirect ASS subtitle samples, and
+# MatroskaLatmSupport (android/app/.../exoplayer/MatroskaLatmSupport.kt) resolves
+# extractorOutput the same way to wrap LATM tracks.
+#
+# R8 renaming either field makes getDeclaredField throw; AssMatroskaExtractor resolves
+# them in its companion object, so the throw surfaces as ExceptionInInitializerError
+# while constructing the extractor — every MKV direct-play, release builds only. Only
+# the *names* need pinning: MatroskaExtractor uses both fields itself, so they survive
+# shrinking through the compile-time subclass references.
+-keepclassmembernames class androidx.media3.extractor.mkv.MatroskaExtractor {
+  private androidx.media3.extractor.ExtractorOutput extractorOutput;
+  private androidx.media3.common.util.ParsableByteArray subtitleSample;
 }
@@ -1,16 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<manifest xmlns:android="http://schemas.android.com/apk/res/android">
-
-    <application>
-        <!-- Serves a test asset over content:// so instrumentation covers the
-             SAF/ContentDataSource read path. Exported because the test body
-             runs in the app's process while this provider lives in the
-             androidTest APK's own uid; it serves nothing but this APK's own
-             assets. Merged into the androidTest APK, never into the app. -->
-        <provider
-            android:name="com.edde746.plezy.exoplayer.FixtureContentProvider"
-            android:authorities="com.edde746.plezy.test.fixtures"
-            android:exported="true" />
-    </application>
-
-</manifest>
@@ -1,117 +0,0 @@
-package com.edde746.plezy.exoplayer;
-
-import android.content.ContentProvider;
-import android.content.ContentValues;
-import android.content.Context;
-import android.database.Cursor;
-import android.net.Uri;
-import android.os.ParcelFileDescriptor;
-import java.io.File;
-import java.io.FileNotFoundException;
-import java.io.FileOutputStream;
-import java.io.IOException;
-import java.io.InputStream;
-import java.io.OutputStream;
-
-/**
- * Serves a test asset over a {@code content://} URI so instrumentation can exercise media3's
- * {@code ContentDataSource} read path.
- *
- * <p>A download stored through SAF reaches the player as {@code content://} and is read with
- * {@code openAssetFileDescriptor} — a different reopen story than a plain file:
- * {@code FfmpegRandomAccessSource} has to open a <em>second</em> descriptor on the document while
- * the loader still holds one. Nothing else in the app produces that shape on demand, and MediaStore
- * would leave rows on the device.
- *
- * <p>The provider owns the whole fixture: a test body runs in the <em>app's</em> process and cannot
- * write into this APK's data directory, so handing it a path could never work. It copies the named
- * asset into its own cache and returns a read-only descriptor, which crosses the uid boundary fine.
- *
- * <p>Java rather than Kotlin on purpose: hosting this provider starts a process for the test APK
- * alone, and the Kotlin stdlib the instrumentation normally borrows from the app is not on that
- * process's classpath.
- */
-public final class FixtureContentProvider extends ContentProvider {
-
-  public static final String AUTHORITY = "com.edde746.plezy.test.fixtures";
-
-  /** @param asset path inside this APK's assets, e.g. {@code ffmpeg/seek_cued.mkv}. */
-  public static Uri uriFor(String asset) {
-    return new Uri.Builder().scheme("content").authority(AUTHORITY).path(asset).build();
-  }
-
-  @Override
-  public boolean onCreate() {
-    return true;
-  }
-
-  @Override
-  public ParcelFileDescriptor openFile(Uri uri, String mode) throws FileNotFoundException {
-    String path = uri.getPath();
-    if (path == null || path.length() <= 1) {
-      throw new FileNotFoundException("no asset in " + uri);
-    }
-    String asset = path.substring(1);
-    Context context = getContext();
-    if (context == null) {
-      throw new FileNotFoundException("provider has no context");
-    }
-    File cached = new File(context.getCacheDir(), asset.replace('/', '-'));
-    if (!cached.isFile()) {
-      copyAsset(context, asset, cached);
-    }
-    return ParcelFileDescriptor.open(cached, ParcelFileDescriptor.MODE_READ_ONLY);
-  }
-
-  private static void copyAsset(Context context, String asset, File target) throws FileNotFoundException {
-    File staging = null;
-    try {
-      context.getCacheDir().mkdirs();
-      staging = File.createTempFile("fixture-", null, context.getCacheDir());
-      try (InputStream source = context.getAssets().open(asset);
-          OutputStream sink = new FileOutputStream(staging)) {
-        byte[] buffer = new byte[64 * 1024];
-        for (int read = source.read(buffer); read != -1; read = source.read(buffer)) {
-          sink.write(buffer, 0, read);
-        }
-      }
-      // Publish atomically so a concurrent open never sees a short file.
-      if (!staging.renameTo(target) && !target.isFile()) {
-        throw new IOException("could not publish " + target);
-      }
-    } catch (IOException e) {
-      FileNotFoundException failure = new FileNotFoundException("could not stage asset " + asset);
-      failure.initCause(e);
-      throw failure;
-    } finally {
-      if (staging != null && staging.isFile()) {
-        staging.delete();
-      }
-    }
-  }
-
-  @Override
-  public String getType(Uri uri) {
-    return "video/x-matroska";
-  }
-
-  @Override
-  public Cursor query(Uri uri, String[] projection, String selection, String[] selectionArgs, String sortOrder) {
-    return null;
-  }
-
-  @Override
-  public Uri insert(Uri uri, ContentValues values) {
-    return null;
-  }
-
-  @Override
-  public int update(Uri uri, ContentValues values, String selection, String[] selectionArgs) {
-    return 0;
-  }
-
-  @Override
-  public int delete(Uri uri, String selection, String[] selectionArgs) {
-    return 0;
-  }
-}
@@ -1,116 +0,0 @@
-package com.edde746.plezy.exoplayer
-
-import androidx.test.ext.junit.runners.AndroidJUnit4
-import androidx.test.platform.app.InstrumentationRegistry
-import java.io.File
-import java.io.RandomAccessFile
-import org.junit.Assert.assertEquals
-import org.junit.Assert.assertTrue
-import org.junit.Test
-import org.junit.runner.RunWith
-
-/**
- * Asserts the demuxer's JNI byte source stays reachable under R8.
- *
- * `ffmpeg_demuxer_jni.cc` resolves [FfmpegDemuxerJni.Input] by name — `FindClass`
- * on the interface, then `GetMethodID` for `position`, `read`, `readAt` and
- * `length`. Nothing in Kotlin calls those methods, so R8 may rename or remove
- * them while every debug check still passes; the AVIO callbacks would then fail
- * on the first read and every container would fall back to media3's extractors.
- * That is the same failure shape as #1703, which shipped.
- *
- * Run against the `minified` build type (`-Pplezy.testBuildType=minified`); on an
- * unminified variant it can only ever pass. Deliberately touches no media3 API,
- * so the only keep rules it depends on are the ones under test.
- */
-@RunWith(AndroidJUnit4::class)
-class FfmpegDemuxerReachabilityTest {
-
-  @Test
-  fun avioCallbacksResolveAndServeBothSequentialAndIndexReads() {
-    assertTrue("ffmpeg demuxer JNI library is unavailable", FfmpegDemuxerJni.available)
-
-    val fixture = copyFixture()
-    val input = FileInput(fixture)
-    try {
-      // nativeOpen drives the whole handshake: FindClass on Input, GetMethodID
-      // for all four methods, then avio reads served back through them. A
-      // shrunk or renamed member makes this fail instead of returning streams.
-      val code = FfmpegDemuxerJni.nativeOpen(input)
-
-      assertEquals("nativeOpen failed (${input.lastError ?: "no java error"})", 0, code)
-      assertTrue("demuxer reported no streams", FfmpegDemuxerJni.nativeStreamCount() > 0)
-      assertTrue("position was never called", input.positionCalls > 0)
-
-      // Header parsing is sequential, so it only proves read()/position()/length().
-      // readAt() is the member nothing in the app calls except this interface's
-      // own implementation, and it is what an index seek runs on.
-      val durationUs = FfmpegDemuxerJni.nativeDurationUs()
-      assertTrue("fixture duration unknown", durationUs > 0)
-      val seek = FfmpegDemuxerJni.nativeSeek(durationUs / 2)
-
-      assertTrue("nativeSeek failed with $seek (${input.lastError ?: "no java error"})", seek >= 0)
-      assertTrue("readAt was never called for the index read", input.readAtCalls > 0)
-    } finally {
-      FfmpegDemuxerJni.nativeClose()
-      input.close()
-      fixture.delete()
-    }
-  }
-
-  private fun copyFixture(): File {
-    val instrumentation = InstrumentationRegistry.getInstrumentation()
-    val cacheDir = instrumentation.targetContext.cacheDir.also { it.mkdirs() }
-    val output = File.createTempFile("ffmpeg-reachability-", ".mkv", cacheDir)
-    instrumentation.context.assets.open(FIXTURE).use { source ->
-      output.outputStream().use(source::copyTo)
-    }
-    return output
-  }
-
-  /** Byte source with no media3 involvement, so R8 has nothing else to keep. */
-  private class FileInput(file: File) : FfmpegDemuxerJni.Input {
-    private val handle = RandomAccessFile(file, "r")
-    private val total = file.length()
-
-    var readAtCalls = 0
-      private set
-
-    var positionCalls = 0
-      private set
-
-    override var lastError: String? = null
-
-    override fun position(): Long {
-      positionCalls++
-      return handle.filePointer
-    }
-
-    override fun read(buf: ByteArray, length: Int): Int {
-      val read = handle.read(buf, 0, length)
-      return if (read < 0) 0 else read
-    }
-
-    override fun readAt(position: Long, buf: ByteArray, length: Int): Int {
-      readAtCalls++
-      val restore = handle.filePointer
-      return try {
-        if (position >= total) return 0
-        handle.seek(position)
-        val read = handle.read(buf, 0, length)
-        if (read < 0) 0 else read
-      } finally {
-        handle.seek(restore)
-      }
-    }
-
-    override fun length(): Long = total
-
-    fun close() = handle.close()
-  }
-
-  private companion object {
-    /** The cued fixture from [FfmpegExtractorSeekTest]: a SeekHead plus Cues at the end. */
-    const val FIXTURE = "ffmpeg/seek_cued.mkv"
-  }
-}
@@ -1,135 +0,0 @@
-package com.edde746.plezy.exoplayer
-
-import android.content.Context
-import android.net.Uri
-import android.os.Handler
-import android.os.HandlerThread
-import androidx.media3.common.MediaItem
-import androidx.media3.common.PlaybackException
-import androidx.media3.common.Player
-import androidx.media3.datasource.DataSpec
-import androidx.media3.datasource.DefaultDataSource
-import androidx.media3.exoplayer.ExoPlayer
-import androidx.media3.exoplayer.source.ProgressiveMediaSource
-import androidx.media3.extractor.ExtractorsFactory
-import androidx.media3.extractor.text.DefaultSubtitleParserFactory
-import androidx.test.ext.junit.runners.AndroidJUnit4
-import androidx.test.platform.app.InstrumentationRegistry
-import com.edde746.plezy.libass.media.AssHandler
-import java.io.File
-import java.util.concurrent.CountDownLatch
-import java.util.concurrent.TimeUnit
-import java.util.concurrent.atomic.AtomicReference
-import org.junit.Assert.assertNotNull
-import org.junit.Assert.assertNull
-import org.junit.Assert.assertTrue
-import org.junit.Test
-import org.junit.runner.RunWith
-
-/**
- * End-to-end regression coverage for #2088: audio demuxed by FfmpegExtractor
- * must reach MediaCodec with the per-codec csd shapes media3's own extractors
- * emit. With raw ffmpeg extradata as the only csd buffer, Android's Opus
- * decoders consume the first two real packets as codec delay / seek pre-roll
- * and then silently discard every decoded sample — the player never leaves
- * STATE_BUFFERING, which this test observes as a playback timeout.
- *
- * The extractors factory contains only FfmpegExtractor, so a fixture that
- * falls back to media3's extractors fails instead of passing vacuously.
- */
-@RunWith(AndroidJUnit4::class)
-class FfmpegExtractorAudioCsdPlaybackTest {
-
-  @Test
-  fun opusPlaysToEnd() {
-    playToEnd("ffmpeg/stereo_opus.mka")
-  }
-
-  @Test
-  fun vorbisPlaysToEnd() {
-    playToEnd("ffmpeg/stereo_vorbis.mka")
-  }
-
-  @Test
-  fun flacPlaysToEnd() {
-    playToEnd("ffmpeg/stereo.flac")
-  }
-
-  private fun playToEnd(fixture: String) {
-    val instrumentation = InstrumentationRegistry.getInstrumentation()
-    val context = instrumentation.targetContext
-    val fixtureFile = copyFixture(instrumentation.context, context, fixture)
-    val playbackThread = HandlerThread("ffmpeg-csd-test").apply { start() }
-    val handler = Handler(playbackThread.looper)
-    val completed = CountDownLatch(1)
-    val playerReference = AtomicReference<ExoPlayer>()
-    val errorReference = AtomicReference<Throwable>()
-
-    handler.post {
-      try {
-        val fixtureUri = Uri.fromFile(fixtureFile)
-        val ffmpegOnlyExtractors = ExtractorsFactory {
-          val extractor = FfmpegExtractor.create(
-            { FfmpegDemuxerPolicy.Preference.FFMPEG },
-            DvConversionMode.DISABLED,
-            DefaultSubtitleParserFactory(),
-            AssHandler(),
-            FfmpegRandomAccessSource(DefaultDataSource.Factory(context)) { DataSpec(fixtureUri) }
-          )
-          assertNotNull("FFmpeg demuxer JNI library is unavailable", extractor)
-          arrayOf(extractor!!)
-        }
-        val player = ExoPlayer.Builder(context, PlezyRenderersFactory(context))
-          .setLooper(playbackThread.looper)
-          .build()
-        playerReference.set(player)
-        player.addListener(object : Player.Listener {
-          override fun onPlayerError(error: PlaybackException) {
-            errorReference.set(error)
-            completed.countDown()
-          }
-
-          override fun onPlaybackStateChanged(playbackState: Int) {
-            if (playbackState == Player.STATE_ENDED) {
-              completed.countDown()
-            }
-          }
-        })
-        val source = ProgressiveMediaSource.Factory(
-          DefaultDataSource.Factory(context),
-          ffmpegOnlyExtractors
-        ).createMediaSource(MediaItem.fromUri(fixtureUri))
-        player.setMediaSource(source)
-        player.prepare()
-        player.play()
-      } catch (error: Throwable) {
-        errorReference.set(error)
-        completed.countDown()
-      }
-    }
-
-    val finished = completed.await(20, TimeUnit.SECONDS)
-    val released = CountDownLatch(1)
-    handler.post {
-      playerReference.get()?.release()
-      playbackThread.quitSafely()
-      released.countDown()
-    }
-    val teardownFinished = released.await(5, TimeUnit.SECONDS)
-    playbackThread.join(5_000)
-    val fixtureDeleted = fixtureFile.delete()
-
-    assertTrue("Player teardown timed out for $fixture", teardownFinished)
-    assertTrue("Playback timed out for $fixture", finished)
-    assertNull("Playback failed for $fixture", errorReference.get())
-    assertTrue("Fixture cleanup failed for $fixture", fixtureDeleted)
-  }
-
-  private fun copyFixture(instrumentationContext: Context, targetContext: Context, fixture: String): File {
-    val output = File.createTempFile("ffmpeg-csd-fixture-", null, targetContext.cacheDir)
-    instrumentationContext.assets.open(fixture).use { input ->
-      output.outputStream().use(input::copyTo)
-    }
-    return output
-  }
-}
@@ -1,357 +0,0 @@
-package com.edde746.plezy.exoplayer
-
-import android.content.Context
-import android.net.Uri
-import androidx.media3.common.C
-import androidx.media3.common.DataReader
-import androidx.media3.common.Format
-import androidx.media3.common.util.ParsableByteArray
-import androidx.media3.datasource.DataSource
-import androidx.media3.datasource.DataSpec
-import androidx.media3.datasource.DefaultDataSource
-import androidx.media3.datasource.TransferListener
-import androidx.media3.extractor.DefaultExtractorInput
-import androidx.media3.extractor.Extractor
-import androidx.media3.extractor.ExtractorInput
-import androidx.media3.extractor.ExtractorOutput
-import androidx.media3.extractor.PositionHolder
-import androidx.media3.extractor.SeekMap
-import androidx.media3.extractor.TrackOutput
-import androidx.media3.extractor.text.DefaultSubtitleParserFactory
-import androidx.test.ext.junit.runners.AndroidJUnit4
-import androidx.test.platform.app.InstrumentationRegistry
-import com.edde746.plezy.libass.media.AssHandler
-import java.io.File
-import org.junit.Assert.assertEquals
-import org.junit.Assert.assertTrue
-import org.junit.Test
-import org.junit.runner.RunWith
-
-/**
- * Regression coverage for #2096 and for the seam that caused it.
- *
- * libavformat resolves seeks through its own index, reading it via
- * [FfmpegRandomAccessSource]. When that read cannot be served, matroskadec
- * burns its one-shot Cues parse and every later seek degrades to libavformat's
- * linear generic scan — which is what buffered a resume for minutes. The cued
- * fixture here has the same geometry as the file from the report (front
- * SeekHead, Cues at 99.5% of the file), so a scan is trivially distinguishable
- * from an index seek: it has to read most of the file.
- */
-@RunWith(AndroidJUnit4::class)
-class FfmpegExtractorSeekTest {
-
-  private companion object {
-    // Regenerate with:
-    //   ffmpeg -f lavfi -i "testsrc=size=160x120:rate=10:duration=30" \
-    //     -c:v libx264 -g 10 -pix_fmt yuv420p -preset veryfast seek_cued.mkv
-    //   mkvmerge --no-cues -o seek_cueless.mkv seek_cued.mkv
-    // The cued fixture keeps ffmpeg's default layout: a SeekHead at byte 52
-    // pointing at Cues written after the clusters, at 99.5% of the file.
-    const val CUED = "ffmpeg/seek_cued.mkv"
-    const val CUELESS = "ffmpeg/seek_cueless.mkv"
-
-    /** The fixtures are 30 s at 10 fps with a keyframe every second. */
-    const val TARGET_US = 25_000_000L
-    const val KEYFRAME_TOLERANCE_US = 1_500_000L
-  }
-
-  @Test
-  fun cuedSeekLandsOnTheTargetWithoutWalkingTheFile() {
-    withHarness(CUED) { harness ->
-      harness.pumpUntilSampleDelivered()
-      assertTrue(
-        "playback should start at the beginning, got ${harness.lastSampleUs}us",
-        harness.lastSampleUs < 500_000L
-      )
-
-      harness.resetByteCounter()
-      harness.seekTo(TARGET_US)
-      val landed = harness.pumpUntilSampleAtLeast(TARGET_US - KEYFRAME_TOLERANCE_US)
-
-      assertTrue("no sample delivered after seeking to ${TARGET_US}us", landed)
-      assertTrue(
-        "seek landed at ${harness.lastSampleUs}us, expected within " +
-          "${KEYFRAME_TOLERANCE_US}us of ${TARGET_US}us",
-        harness.lastSampleUs <= TARGET_US + KEYFRAME_TOLERANCE_US
-      )
-      // An index seek reads the Cues plus the target cluster. A generic scan
-      // has to read everything up to 83% of the file to get here.
-      val budget = harness.fixtureSize / 3
-      assertTrue(
-        "seek read ${harness.bytesRead} bytes of a ${harness.fixtureSize}-byte file; " +
-          "expected under $budget (index seek, not a scan)",
-        harness.bytesRead < budget
-      )
-      // Reopening per read would mean one request per 64 KB in steady state.
-      assertTrue("random-access opens after seek: ${harness.randomAccessOpens}", harness.randomAccessOpens <= 4)
-    }
-  }
-
-  /**
-   * Without Cues libavformat falls back to its generic scan, exactly as media3's
-   * own MatroskaExtractor scans clusters. That is slow but it must still land on
-   * the target rather than stalling or silently delivering from the wrong place.
-   */
-  @Test
-  fun cuelessSeekStillReachesTheTarget() {
-    withHarness(CUELESS) { harness ->
-      harness.pumpUntilSampleDelivered()
-      harness.seekTo(TARGET_US)
-      val landed = harness.pumpUntilSampleAtLeast(TARGET_US - KEYFRAME_TOLERANCE_US)
-
-      assertTrue("cueless seek to ${TARGET_US}us delivered nothing", landed)
-      assertTrue(
-        "cueless seek landed at ${harness.lastSampleUs}us",
-        harness.lastSampleUs <= TARGET_US + KEYFRAME_TOLERANCE_US
-      )
-    }
-  }
-
-  /**
-   * A download stored through SAF arrives as `content://`, which media3 reads
-   * with `openAssetFileDescriptor`. The demuxer's index reads therefore have to
-   * open a second descriptor on the same document while the loader still holds
-   * one — the case a `file://` fixture cannot prove.
-   */
-  @Test
-  fun cuedSeekLandsOnTheTargetThroughAContentUri() {
-    withHarness(CUED, contentUri = true) { harness ->
-      harness.pumpUntilSampleDelivered()
-
-      harness.resetByteCounter()
-      harness.seekTo(TARGET_US)
-      val landed = harness.pumpUntilSampleAtLeast(TARGET_US - KEYFRAME_TOLERANCE_US)
-
-      assertTrue("no sample delivered after a content:// seek to ${TARGET_US}us", landed)
-      assertTrue(
-        "content:// seek landed at ${harness.lastSampleUs}us",
-        harness.lastSampleUs <= TARGET_US + KEYFRAME_TOLERANCE_US
-      )
-      assertTrue(
-        "content:// index read opened no descriptor of its own",
-        harness.randomAccessOpens > 0
-      )
-      val budget = harness.fixtureSize / 3
-      assertTrue(
-        "content:// seek read ${harness.bytesRead} bytes of a ${harness.fixtureSize}-byte file; " +
-          "expected under $budget (index seek, not a scan)",
-        harness.bytesRead < budget
-      )
-    }
-  }
-
-  @Test
-  fun playbackFromTheStartDeliversEverySampleFromTheBeginning() {
-    withHarness(CUED) { harness ->
-      val timestamps = harness.pumpSamples(count = 40)
-
-      assertTrue("expected samples from the start, got ${timestamps.size}", timestamps.size >= 40)
-      assertTrue("first sample at ${timestamps.first()}us", timestamps.first() < 500_000L)
-      // Delivery is in decode order, which is not presentation order once the
-      // encoder emits B-frames; what must hold is that the set of samples is
-      // gapless from zero (this fixture is a steady 10 fps).
-      val sorted = timestamps.sorted()
-      assertEquals(sorted.indices.map { it * 100_000L }, sorted)
-    }
-  }
-
-  private fun withHarness(fixture: String, contentUri: Boolean = false, block: (Harness) -> Unit) {
-    val instrumentation = InstrumentationRegistry.getInstrumentation()
-    val context = instrumentation.targetContext
-    val file = copyFixture(instrumentation.context, context, fixture)
-    // The content:// case reads the same asset back through the provider, which
-    // keeps its own copy: this process cannot write into the test APK's dirs.
-    val uri = if (contentUri) FixtureContentProvider.uriFor(fixture) else Uri.fromFile(file)
-    val harness = Harness(context, file, uri)
-    try {
-      harness.prepare()
-      block(harness)
-    } finally {
-      harness.close()
-      file.delete()
-    }
-  }
-
-  private fun copyFixture(instrumentationContext: Context, targetContext: Context, fixture: String): File {
-    val cacheDir = targetContext.cacheDir.also { it.mkdirs() }
-    val output = File.createTempFile("ffmpeg-seek-fixture-", ".mkv", cacheDir)
-    instrumentationContext.assets.open(fixture).use { input ->
-      output.outputStream().use(input::copyTo)
-    }
-    return output
-  }
-
-  /**
-   * Minimal stand-in for ProgressiveMediaPeriod's loader: it opens the data
-   * source, feeds an ExtractorInput, and honours RESULT_SEEK by re-opening —
-   * the same contract media3 implements in ExtractingLoadable.load().
-   */
-  private class Harness(context: Context, fixture: File, private val uri: Uri) {
-    val fixtureSize = fixture.length()
-    private val counting = CountingDataSourceFactory(DefaultDataSource.Factory(context))
-    private val io = FfmpegRandomAccessSource(counting) { DataSpec(uri) }
-    private val output = CapturingOutput()
-    private val positionHolder = PositionHolder()
-    private val extractor = requireNotNull(
-      FfmpegExtractor.create(
-        { FfmpegDemuxerPolicy.Preference.FFMPEG },
-        DvConversionMode.DISABLED,
-        DefaultSubtitleParserFactory(),
-        AssHandler(),
-        io
-      )
-    ) { "native ffmpeg demuxer unavailable" }
-
-    private var dataSource: DataSource? = null
-    private var input: ExtractorInput? = null
-    private var opensBaseline = 0
-
-    val lastSampleUs: Long
-      get() = output.lastSampleUs
-
-    val bytesRead: Long
-      get() = counting.bytesRead
-
-    val randomAccessOpens: Int
-      get() = io.openCount - opensBaseline
-
-    fun prepare() {
-      openAt(0)
-      assertTrue("fixture should be sniffed by the ffmpeg demuxer", extractor.sniff(input!!))
-      input!!.resetPeekPosition()
-      extractor.init(output)
-    }
-
-    fun resetByteCounter() {
-      counting.reset()
-      opensBaseline = io.openCount
-    }
-
-    fun seekTo(timeUs: Long) {
-      // media3 restarts the load at the SeekMap's byte hint, then calls seek()
-      // on the loader thread before the next read.
-      val hint = output.seekMap?.getSeekPoints(timeUs)?.first?.position ?: 0L
-      openAt(hint)
-      extractor.seek(hint, timeUs)
-    }
-
-    fun pumpUntilSampleDelivered(): Boolean {
-      val before = output.sampleCount
-      return pump { output.sampleCount > before }
-    }
-
-    fun pumpUntilSampleAtLeast(timeUs: Long): Boolean = pump { output.lastSampleUs >= timeUs }
-
-    fun pumpSamples(count: Int): List<Long> {
-      pump { output.sampleTimestamps.size >= count }
-      return output.sampleTimestamps.toList()
-    }
-
-    private fun pump(until: () -> Boolean): Boolean {
-      repeat(200_000) {
-        if (until()) return true
-        when (extractor.read(input!!, positionHolder)) {
-          Extractor.RESULT_SEEK -> openAt(positionHolder.position)
-          Extractor.RESULT_END_OF_INPUT -> return until()
-          else -> Unit
-        }
-      }
-      return until()
-    }
-
-    private fun openAt(position: Long) {
-      dataSource?.close()
-      val source = counting.createDataSource()
-      val remaining = source.open(DataSpec.Builder().setUri(uri).setPosition(position).build())
-      dataSource = source
-      input = DefaultExtractorInput(
-        source,
-        position,
-        if (remaining == C.LENGTH_UNSET.toLong()) C.LENGTH_UNSET.toLong() else position + remaining
-      )
-    }
-
-    fun close() {
-      extractor.release()
-      dataSource?.close()
-    }
-  }
-
-  private class CapturingOutput : ExtractorOutput {
-    val sampleTimestamps = mutableListOf<Long>()
-    var seekMap: SeekMap? = null
-      private set
-
-    val sampleCount: Int
-      get() = sampleTimestamps.size
-
-    val lastSampleUs: Long
-      get() = sampleTimestamps.lastOrNull() ?: C.TIME_UNSET
-
-    override fun track(id: Int, type: Int): TrackOutput = CapturingTrack(type, sampleTimestamps)
-
-    override fun endTracks() = Unit
-
-    override fun seekMap(seekMap: SeekMap) {
-      this.seekMap = seekMap
-    }
-  }
-
-  private class CapturingTrack(private val type: Int, private val timestamps: MutableList<Long>) : TrackOutput {
-    private val scratch = ByteArray(64 * 1024)
-
-    override fun format(format: Format) = Unit
-
-    override fun sampleData(input: DataReader, length: Int, allowEndOfInput: Boolean): Int = sampleData(input, length, allowEndOfInput, TrackOutput.SAMPLE_DATA_PART_MAIN)
-
-    override fun sampleData(input: DataReader, length: Int, allowEndOfInput: Boolean, sampleDataPart: Int): Int {
-      val read = input.read(scratch, 0, minOf(length, scratch.size))
-      return if (read == C.RESULT_END_OF_INPUT) 0 else read
-    }
-
-    override fun sampleData(data: ParsableByteArray, length: Int) {
-      sampleData(data, length, TrackOutput.SAMPLE_DATA_PART_MAIN)
-    }
-
-    override fun sampleData(data: ParsableByteArray, length: Int, sampleDataPart: Int) {
-      data.skipBytes(length)
-    }
-
-    override fun sampleMetadata(timeUs: Long, flags: Int, size: Int, offset: Int, cryptoData: TrackOutput.CryptoData?) {
-      if (type == C.TRACK_TYPE_VIDEO) timestamps.add(timeUs)
-    }
-  }
-
-  /** Counts every byte the demuxer pulls, through either read path. */
-  private class CountingDataSourceFactory(private val delegate: DataSource.Factory) : DataSource.Factory {
-    @Volatile private var counter = 0L
-
-    val bytesRead: Long
-      get() = counter
-
-    fun reset() {
-      counter = 0L
-    }
-
-    override fun createDataSource(): DataSource = Counting(delegate.createDataSource())
-
-    private inner class Counting(private val inner: DataSource) : DataSource {
-      override fun open(dataSpec: DataSpec): Long = inner.open(dataSpec)
-
-      override fun read(buffer: ByteArray, offset: Int, length: Int): Int {
-        val read = inner.read(buffer, offset, length)
-        if (read > 0) counter += read
-        return read
-      }
-
-      override fun addTransferListener(transferListener: TransferListener) = inner.addTransferListener(transferListener)
-
-      override fun getUri(): Uri? = inner.uri
-
-      override fun getResponseHeaders(): Map<String, List<String>> = inner.responseHeaders
-
-      override fun close() = inner.close()
-    }
-  }
-}
@@ -0,0 +1,171 @@
+package com.edde746.plezy.exoplayer
+
+import android.net.Uri
+import android.os.Handler
+import android.os.HandlerThread
+import android.util.Log
+import androidx.media3.common.MediaItem
+import androidx.media3.common.Player
+import androidx.media3.datasource.DefaultDataSource
+import androidx.media3.exoplayer.ExoPlayer
+import androidx.media3.exoplayer.source.ProgressiveMediaSource
+import androidx.media3.extractor.Extractor
+import androidx.media3.extractor.ExtractorsFactory
+import androidx.media3.extractor.mkv.MatroskaExtractor
+import androidx.media3.extractor.text.DefaultSubtitleParserFactory
+import androidx.test.platform.app.InstrumentationRegistry
+import com.edde746.plezy.libass.media.AssHandler
+import com.edde746.plezy.libass.media.parser.AssSubtitleParserFactory
+import java.io.File
+import java.util.concurrent.CountDownLatch
+import java.util.concurrent.TimeUnit
+import java.util.concurrent.atomic.AtomicBoolean
+import java.util.concurrent.atomic.AtomicReference
+import org.junit.Assert.assertFalse
+import org.junit.Assert.assertTrue
+import org.junit.Test
+
+/**
+ * On-device coverage for MKV files whose SeekHead references Tracks after the Clusters (#1969).
+ *
+ * media3 1.11.0 builds the Matroska seek map at the end of the Cues element, which for these files
+ * is before the Tracks element parsed, so the map permanently reports unseekable and ExoPlayer
+ * coerces every seek to t=0 (ProgressiveMediaPeriod; tracking issue androidx/media #3377). The
+ * first test is a canary asserting the upstream defect against a stock MatroskaExtractor — when it
+ * fails after a media3 upgrade, the TrackAwareSeekMap repair in [CuelessSeekExtractorWrapper] can
+ * be retired. The second test drives the production wrapper stack and requires the seek to
+ * actually land.
+ */
+class MatroskaLateTracksSeekDeviceTest {
+  private companion object {
+    const val TAG = "MkvLateTracksSeek"
+    const val SEEK_TARGET_MS = 500L
+    const val SETTLE_MS = 2_000L
+  }
+
+  private class Session(
+    val handler: Handler,
+    val thread: HandlerThread,
+    val player: AtomicReference<ExoPlayer?>,
+    val fixture: File
+  )
+
+  @Test
+  fun stockMatroskaExtractorSnapsSeeksToStart() {
+    val result = runSeekScenario("stock") { MatroskaExtractor(DefaultSubtitleParserFactory()) }
+    assertFalse(
+      "upstream media3 now reports tracks-after-clusters MKVs seekable — " +
+        "the TrackAwareSeekMap repair in CuelessSeekExtractorWrapper can be retired",
+      result.seekable
+    )
+    assertTrue(
+      "unseekable media must snap the seek to the start, position=${result.positionAfterSeekMs}ms",
+      result.positionAfterSeekMs < SEEK_TARGET_MS / 2
+    )
+  }
+
+  @Test
+  fun wrappedExtractorKeepsSeekPosition() {
+    val result = runSeekScenario("wrapped") {
+      val assHandler = AssHandler()
+      CuelessSeekExtractorWrapper(ZlibMatroskaExtractor(AssSubtitleParserFactory(assHandler), assHandler))
+    }
+    assertTrue("wrapped extractor must report the item seekable", result.seekable)
+    assertTrue(
+      "seek to ${SEEK_TARGET_MS}ms must hold, position=${result.positionAfterSeekMs}ms",
+      result.positionAfterSeekMs >= SEEK_TARGET_MS / 2
+    )
+  }
+
+  private class ScenarioResult(val seekable: Boolean, val positionAfterSeekMs: Long)
+
+  private fun runSeekScenario(label: String, extractorFactory: () -> Extractor): ScenarioResult {
+    val session = openPaused(label, extractorFactory)
+    try {
+      val seekable = onPlayerThread(session) { it.isCurrentMediaItemSeekable }
+      session.handler.post { session.player.get()?.seekTo(SEEK_TARGET_MS) }
+      // The masked position is the seek target; the snap surfaces once the period resolves the
+      // seek, so give the load a moment before sampling the settled position.
+      Thread.sleep(SETTLE_MS)
+      val positionAfterSeekMs = onPlayerThread(session) { it.currentPosition }
+      Log.i(TAG, "==== $label: seekable=$seekable position=${positionAfterSeekMs}ms ====")
+      return ScenarioResult(seekable, positionAfterSeekMs)
+    } finally {
+      teardown(session)
+    }
+  }
+
+  private fun openPaused(label: String, extractorFactory: () -> Extractor): Session {
+    val instrumentation = InstrumentationRegistry.getInstrumentation()
+    val context = instrumentation.targetContext
+    val fixture = copyFixture(context)
+    val thread = HandlerThread("mkv-late-tracks-$label").apply { start() }
+    val handler = Handler(thread.looper)
+    val player = AtomicReference<ExoPlayer?>(null)
+    val ready = CountDownLatch(1)
+    val failed = AtomicBoolean(false)
+
+    handler.post {
+      val exo = ExoPlayer.Builder(context).build()
+      player.set(exo)
+      exo.addListener(
+        object : Player.Listener {
+          override fun onPlaybackStateChanged(playbackState: Int) {
+            if (playbackState == Player.STATE_READY) ready.countDown()
+          }
+
+          override fun onPlayerError(error: androidx.media3.common.PlaybackException) {
+            Log.e(TAG, "$label player error", error)
+            failed.set(true)
+            ready.countDown()
+          }
+        }
+      )
+      val source = ProgressiveMediaSource.Factory(
+        DefaultDataSource.Factory(context),
+        ExtractorsFactory { arrayOf(extractorFactory()) }
+      ).createMediaSource(MediaItem.fromUri(Uri.fromFile(fixture)))
+      exo.setMediaSource(source)
+      exo.playWhenReady = false
+      exo.prepare()
+    }
+
+    val session = Session(handler, thread, player, fixture)
+    if (!ready.await(30, TimeUnit.SECONDS) || failed.get()) {
+      teardown(session)
+      error("$label playback never became ready")
+    }
+    return session
+  }
+
+  private fun <T> onPlayerThread(session: Session, read: (ExoPlayer) -> T): T {
+    val value = AtomicReference<T>()
+    val done = CountDownLatch(1)
+    session.handler.post {
+      session.player.get()?.let { value.set(read(it)) }
+      done.countDown()
+    }
+    assertTrue("player thread stalled", done.await(5, TimeUnit.SECONDS))
+    return checkNotNull(value.get())
+  }
+
+  private fun teardown(session: Session) {
+    val done = CountDownLatch(1)
+    session.handler.post {
+      session.player.get()?.release()
+      done.countDown()
+    }
+    done.await(10, TimeUnit.SECONDS)
+    session.thread.quitSafely()
+    session.thread.join(5_000)
+    session.fixture.delete()
+  }
+
+  private fun copyFixture(context: android.content.Context): File {
+    val output = File.createTempFile("mkv-late-tracks-", ".mkv", context.cacheDir)
+    InstrumentationRegistry.getInstrumentation().context.assets
+      .open("ffmpeg/matroska_tracks_at_end.mkv")
+      .use { input -> output.outputStream().use { input.copyTo(it) } }
+    return output
+  }
+}
@@ -6,9 +6,6 @@
 <manifest xmlns:android="http://schemas.android.com/apk/res/android"
    xmlns:tools="http://schemas.android.com/tools"
    android:installLocation="auto">
-    <!-- Allow minSdk=25 despite libmpv-android declaring minSdk=26 -->
-    <uses-sdk tools:overrideLibrary="dev.jdtech.mpv" />
-
    <uses-permission android:name="android.permission.INTERNET"/>
    <uses-permission android:name="android.permission.MODIFY_AUDIO_SETTINGS"/>

@@ -19,22 +19,20 @@ else()
    target_link_libraries(dovi_bridge log)
 endif()

-foreach(ffmpeg_library avcodec avformat avutil swresample)
+foreach(ffmpeg_library avcodec avutil swresample)
    add_library(${ffmpeg_library} SHARED IMPORTED)
    set_target_properties(${ffmpeg_library} PROPERTIES
        IMPORTED_LOCATION "${MPV_FFMPEG_ROOT}/native/${ANDROID_ABI}/lib${ffmpeg_library}.so")
 endforeach()

 add_library(ffmpegJNI SHARED
-    media3_ffmpeg_decoder/ffmpeg_jni.cc
-    media3_ffmpeg_demuxer/ffmpeg_demuxer_jni.cc)
+    media3_ffmpeg_decoder/ffmpeg_jni.cc)
 target_compile_features(ffmpegJNI PRIVATE cxx_std_17)
 target_include_directories(ffmpegJNI PRIVATE
    "${MPV_FFMPEG_ROOT}/include"
    "${CMAKE_CURRENT_SOURCE_DIR}/media3_ffmpeg_decoder")
 target_link_libraries(ffmpegJNI
    avcodec
-    avformat
    avutil
    swresample
    android
@@ -1,952 +0,0 @@
-/*
- * Copyright (c) 2026 Plezy
- *
- * libavformat demuxing for media3. Wraps an AVFormatContext whose AVIOContext
- * is served by a media3 ExtractorInput, so FFmpeg parses the container while
- * media3 keeps owning decoders, renderers, and the whole playback surface.
- *
- * The seam used to be seeking. media3's Extractor is a pull API: an extractor
- * cannot move the input; it returns RESULT_SEEK and the loader re-opens the
- * data source. libavformat expects random access and seeks whenever it pleases
- * (MP4 moov at end of file, AVI idx1, MKV Cues, MPEG-PS binary search), so
- * serving it from the loader alone meant unwinding the in-flight libavformat
- * call on every backward jump and replaying the whole open — which a
- * one-shot lazy parse like matroska's Cues cannot survive (#2096).
- *
- * libavformat now gets what it actually requires: the Kotlin side hands this
- * shim a random-access byte source (FfmpegRandomAccessSource), so every AVIO
- * read succeeds at the position libavformat asked for and nothing is ever
- * unwound. Two paths serve reads, chosen per read:
- *
- * - The loader's ExtractorInput when it already stands at that position. This
- *   is the steady state for sample delivery, and it keeps media3's byte
- *   accounting, back-pressure and load-error policy in charge of streaming.
- * - The random-access source otherwise (header, index, post-seek jumps).
- *
- * Kotlin nudges the loader back into step after a jump by returning
- * RESULT_SEEK to nativeLogicalPosition(); that is an optimization, never a
- * correctness requirement, so no budgets or retries guard it.
- */
-#include <android/log.h>
-#include <jni.h>
-
-#include <cmath>
-#include <cstring>
-#include <vector>
-
-extern "C" {
-#ifdef __cplusplus
-#define __STDC_CONSTANT_MACROS
-#ifdef _STDINT_H
-#undef _STDINT_H
-#endif
-#include <stdint.h>
-#endif
-#include <libavcodec/avcodec.h>
-#include <libavcodec/bsf.h>
-#include <libavformat/avformat.h>
-#include <libavutil/dict.h>
-#include <libavutil/display.h>
-#include <libavutil/dovi_meta.h>
-#include <libavutil/error.h>
-#include <libavutil/rational.h>
-}
-
-#define LOG_TAG "ffmpeg_demuxer"
-#define LOGE(...) ((void)__android_log_print(ANDROID_LOG_ERROR, LOG_TAG, __VA_ARGS__))
-#define LOGW(...) ((void)__android_log_print(ANDROID_LOG_WARN, LOG_TAG, __VA_ARGS__))
-#define LOGD(...) ((void)__android_log_print(ANDROID_LOG_DEBUG, LOG_TAG, __VA_ARGS__))
-
-namespace {
-
-// readPacket() result codes written to out[0]. Negative values are raw
-// AVERROR codes; ERR_JAVA signals the byte source threw and Kotlin must
-// rethrow the stored IOException.
-const jint CODE_PACKET = 0;
-const jint CODE_EOF = 1;
-const jint CODE_GROW = 2;
-const jint ERR_NOT_OPEN = -101;
-const jint ERR_JAVA = -102;
-
-// streamInfo() long[] layout. Keep in sync with FfmpegDemuxerJni.kt.
-const int INFO_TRACK_TYPE = 0;  // 0 video, 1 audio, 2 text, -1 unsupported
-const int INFO_WIDTH = 1;
-const int INFO_HEIGHT = 2;
-const int INFO_PAR_NUM = 3;
-const int INFO_PAR_DEN = 4;
-const int INFO_FPS_NUM = 5;
-const int INFO_FPS_DEN = 6;
-const int INFO_SAMPLE_RATE = 7;
-const int INFO_CHANNELS = 8;
-const int INFO_PCM_ENCODING = 9;  // media3 C.ENCODING_* value, -1 when n/a
-const int INFO_ROTATION = 10;
-const int INFO_SELECTION_FLAGS = 11;
-const int INFO_ROLE_FLAGS = 12;
-const int INFO_BITRATE = 13;
-const int INFO_DOVI_PROFILE = 14;  // DV profile from dvcC/dvvC side data, -1 when none
-const int INFO_DOVI_LEVEL = 15;
-const int INFO_LATM = 16;  // 1 when the audio stream is LOAS/LATM-framed AAC
-const int INFO_LENGTH = 17;
-
-// Android AudioFormat encoding constants (media3 C.ENCODING_* mirror them).
-const jint PCM_ENCODING_NONE = -1;
-const jint PCM_ENCODING_8BIT = 3;
-const jint PCM_ENCODING_16BIT = 2;
-const jint PCM_ENCODING_FLOAT = 4;
-const jint PCM_ENCODING_24BIT_PACKED = 21;
-const jint PCM_ENCODING_32BIT = 22;
-const jint PCM_ENCODING_ALAW = 11;
-const jint PCM_ENCODING_ULAW = 12;
-
-// media3 C.SELECTION_FLAG_* and C.ROLE_FLAG_* values.
-const jint SELECTION_FLAG_DEFAULT = 1;
-const jint SELECTION_FLAG_FORCED = 2;
-const jint ROLE_FLAG_MAIN = 1;
-const jint ROLE_FLAG_DESCRIPTION = 64;       // C.ROLE_FLAG_DESCRIPTION
-const jint ROLE_FLAG_HARD_OF_HEARING = 512;  // C.ROLE_FLAG_HARD_OF_HEARING
-
-constexpr jint kReadChunkBytes = 64 * 1024;
-
-struct DemuxState {
-  JavaVM* vm = nullptr;
-  jobject input = nullptr;
-  jmethodID midPosition = nullptr;
-  jmethodID midRead = nullptr;
-  jmethodID midReadAt = nullptr;
-  jmethodID midLength = nullptr;
-  jbyteArray readBuffer = nullptr;
-
-  AVFormatContext* format = nullptr;
-  AVIOContext* avio = nullptr;
-  bool opened = false;
-
-  // Byte position libavformat will read next. Authoritative: the AVIO seek
-  // callback moves it, and both read paths serve exactly this offset.
-  int64_t logicalPos = 0;
-  // format->start_time in microseconds; subtracted from delivered pts so
-  // media3's zero-based timeline matches the duration we report (MPEG-PS/TS
-  // containers commonly start at a nonzero PCR).
-  int64_t startTimeUs = 0;
-
-  AVPacket* packet = nullptr;
-  AVPacket* filteredPacket = nullptr;
-  // A packet that outgrew the Java-side buffer: already read and filtered,
-  // waiting for redelivery after CODE_GROW. Without this flag the retry's
-  // av_read_frame would silently drop it.
-  bool packetPending = false;
-
-  // Annex-B conversion for H264/HEVC streams stored length-prefixed
-  // (matroska/mp4 family); one context per stream, null when none needed.
-  AVBSFContext** bsf = nullptr;
-  unsigned nbStreams = 0;
-
-  bool javaError = false;
-};
-
-// One demuxer at a time: a player session owns exactly one progressive source
-// and the extractor releases its state before another can open.
-DemuxState* gState = nullptr;
-JavaVM* gVm = nullptr;
-
-// Serializes JNI entry points against closeState: the fallback path can
-// release the player while the loader thread is inside a native call, and
-// deleting DemuxState under it is a use-after-free (observed as a scudo
-// invalid-chunk abort during MPV fallback teardown).
-pthread_mutex_t gStateMutex = PTHREAD_MUTEX_INITIALIZER;
-
-struct StateLock {
-  StateLock() { pthread_mutex_lock(&gStateMutex); }
-  ~StateLock() { pthread_mutex_unlock(&gStateMutex); }
-};
-
-JNIEnv* envFor() {
-  JNIEnv* env = nullptr;
-  if (gVm->GetEnv(reinterpret_cast<void**>(&env), JNI_VERSION_1_6) != JNI_OK) return nullptr;
-  return env;
-}
-
-bool javaPending(JNIEnv* env) { return env->ExceptionCheck() == JNI_TRUE; }
-
-void javaClear(JNIEnv* env) {
-  if (env->ExceptionCheck() == JNI_TRUE) env->ExceptionClear();
-}
-
-jlong callPosition(JNIEnv* env, DemuxState* s) { return env->CallLongMethod(s->input, s->midPosition); }
-
-jlong callLength(JNIEnv* env, DemuxState* s) { return env->CallLongMethod(s->input, s->midLength); }
-
-// Returns bytes read, 0 at end of input, or -1 when the input failed (the
-// Kotlin proxy stored the IOException message).
-jint callRead(JNIEnv* env, DemuxState* s, jint length) {
-  jint n = env->CallIntMethod(s->input, s->midRead, s->readBuffer, length);
-  if (javaPending(env)) {
-    javaClear(env);
-    s->javaError = true;
-    return -1;
-  }
-  return n;
-}
-
-// Same contract as callRead, but at an absolute position: the Kotlin source
-// reopens its handle when the position is not where it stands.
-jint callReadAt(JNIEnv* env, DemuxState* s, int64_t position, jint length) {
-  jint n = env->CallIntMethod(s->input, s->midReadAt, static_cast<jlong>(position), s->readBuffer, length);
-  if (javaPending(env)) {
-    javaClear(env);
-    s->javaError = true;
-    return -1;
-  }
-  return n;
-}
-
-int avioReadPacket(void* opaque, uint8_t* buf, int bufSize) {
-  DemuxState* s = static_cast<DemuxState*>(opaque);
-  JNIEnv* env = envFor();
-  if (env == nullptr) return AVERROR(EIO);
-  if (bufSize <= 0) return 0;
-
-  const jint want = bufSize < kReadChunkBytes ? bufSize : kReadChunkBytes;
-  // Prefer the loader's input when it already stands here: those bytes then
-  // count as media3's own load progress, which is what drives its buffering
-  // and back-pressure. Anywhere else, read at the absolute position.
-  const int64_t inputPos = callPosition(env, s);
-  if (javaPending(env)) {
-    javaClear(env);
-    s->javaError = true;
-    return AVERROR(EIO);
-  }
-  const jint n = inputPos == s->logicalPos ? callRead(env, s, want) : callReadAt(env, s, s->logicalPos, want);
-  if (s->javaError) return AVERROR(EIO);
-  if (n < 0) return AVERROR(EIO);
-  if (n == 0) return AVERROR_EOF;
-
-  env->GetByteArrayRegion(s->readBuffer, 0, n, reinterpret_cast<jbyte*>(buf));
-  s->logicalPos += n;
-  return n;
-}
-
-int64_t avioSeek(void* opaque, int64_t offset, int whence) {
-  DemuxState* s = static_cast<DemuxState*>(opaque);
-  JNIEnv* env = envFor();
-  if (env == nullptr) return AVERROR(EIO);
-
-  whence &= ~AVSEEK_FORCE;
-  if (whence == AVSEEK_SIZE) {
-    int64_t length = callLength(env, s);
-    if (javaPending(env)) {
-      javaClear(env);
-      s->javaError = true;
-      return -1;
-    }
-    return length < 0 ? -1 : length;
-  }
-
-  int64_t target;
-  if (whence == SEEK_CUR) {
-    target = s->logicalPos + offset;
-  } else if (whence == SEEK_END) {
-    int64_t length = callLength(env, s);
-    if (javaPending(env)) {
-      javaClear(env);
-      s->javaError = true;
-      return AVERROR(EIO);
-    }
-    if (length < 0) return AVERROR(EIO);
-    target = length + offset;
-  } else {
-    target = offset;
-  }
-
-  // Pure bookkeeping: the next read serves this position from whichever path
-  // can, so a seek can no longer fail or need reconciling. avio invalidates
-  // its own buffers after this successful callback.
-  s->logicalPos = target;
-  return target;
-}
-
-// Probing (ffio_ensure_seekback) can swap the AVIO buffer for a larger
-// allocation and free the original, so the pointer handed to
-// avio_alloc_context may be stale. Free whichever buffer the context
-// currently holds, exactly once.
-void freeAvio(DemuxState* s) {
-  if (s->avio == nullptr) return;
-  av_freep(&s->avio->buffer);
-  avio_context_free(&s->avio);
-}
-
-void closeState() {
-  DemuxState* s = gState;
-  if (s == nullptr) return;  // Close without (or after) an open is a no-op.
-  JNIEnv* env = envFor();
-  if (s->filteredPacket != nullptr) {
-    av_packet_free(&s->filteredPacket);
-  }
-  if (s->bsf != nullptr) {
-    for (unsigned i = 0; i < s->nbStreams; i++) {
-      if (s->bsf[i] != nullptr) av_bsf_free(&s->bsf[i]);
-    }
-    av_freep(&s->bsf);
-  }
-  if (s->packet != nullptr) {
-    av_packet_free(&s->packet);
-  }
-  if (s->format != nullptr) {
-    avformat_close_input(&s->format);
-  }
-  freeAvio(s);
-  if (env != nullptr && s->input != nullptr) {
-    if (s->readBuffer != nullptr) env->DeleteGlobalRef(s->readBuffer);
-    env->DeleteGlobalRef(s->input);
-  }
-  delete s;
-  gState = nullptr;
-}
-
-const char* videoMime(AVCodecID id) {
-  switch (id) {
-    case AV_CODEC_ID_H264:
-      return "video/avc";
-    case AV_CODEC_ID_HEVC:
-      return "video/hevc";
-    case AV_CODEC_ID_MPEG4:
-      return "video/mp4v-es";
-    case AV_CODEC_ID_MPEG2VIDEO:
-      return "video/mpeg2";
-    case AV_CODEC_ID_MJPEG:
-      return "video/mjpeg";
-    case AV_CODEC_ID_VP8:
-      return "video/x-vnd.on2.vp8";
-    case AV_CODEC_ID_VP9:
-      return "video/x-vnd.on2.vp9";
-    case AV_CODEC_ID_AV1:
-      return "video/av01";
-    case AV_CODEC_ID_H263:
-      return "video/3gpp";
-    default:
-      return nullptr;
-  }
-}
-
-const char* audioMime(AVCodecID id, jint* pcmEncoding) {
-  *pcmEncoding = PCM_ENCODING_NONE;
-  switch (id) {
-    case AV_CODEC_ID_AAC:
-      return "audio/mp4a-latm";
-    case AV_CODEC_ID_AAC_LATM:
-      // LOAS/LATM framing. Kotlin wraps the track with LatmTrackOutput, which
-      // unwraps to raw AAC access units and emits the real decoder Format;
-      // this mime only marks the stream as supported.
-      return "audio/mp4a-latm";
-    case AV_CODEC_ID_MP3:
-      return "audio/mpeg";
-    case AV_CODEC_ID_MP2:
-      return "audio/mpeg-L2";
-    case AV_CODEC_ID_AC3:
-      return "audio/ac3";
-    case AV_CODEC_ID_EAC3:
-      return "audio/eac3";
-    case AV_CODEC_ID_DTS:
-      return "audio/vnd.dts";
-    case AV_CODEC_ID_TRUEHD:
-      return "audio/true-hd";
-    case AV_CODEC_ID_FLAC:
-      return "audio/flac";
-    case AV_CODEC_ID_OPUS:
-      return "audio/opus";
-    case AV_CODEC_ID_VORBIS:
-      return "audio/vorbis";
-    case AV_CODEC_ID_ALAC:
-      return "audio/alac";
-    case AV_CODEC_ID_AMR_NB:
-      return "audio/amr";
-    case AV_CODEC_ID_AMR_WB:
-      return "audio/amr-wb";
-    case AV_CODEC_ID_PCM_S16LE:
-      *pcmEncoding = PCM_ENCODING_16BIT;
-      return "audio/raw";
-    case AV_CODEC_ID_PCM_S16BE:
-      *pcmEncoding = PCM_ENCODING_16BIT;
-      return "audio/raw";
-    case AV_CODEC_ID_PCM_S8:
-      *pcmEncoding = PCM_ENCODING_8BIT;
-      return "audio/raw";
-    case AV_CODEC_ID_PCM_U8:
-      *pcmEncoding = PCM_ENCODING_8BIT;
-      return "audio/raw";
-    case AV_CODEC_ID_PCM_S24LE:
-      *pcmEncoding = PCM_ENCODING_24BIT_PACKED;
-      return "audio/raw";
-    case AV_CODEC_ID_PCM_S32LE:
-      *pcmEncoding = PCM_ENCODING_32BIT;
-      return "audio/raw";
-    case AV_CODEC_ID_PCM_F32LE:
-      *pcmEncoding = PCM_ENCODING_FLOAT;
-      return "audio/raw";
-    case AV_CODEC_ID_PCM_F32BE:
-      *pcmEncoding = PCM_ENCODING_FLOAT;
-      return "audio/raw";
-    case AV_CODEC_ID_PCM_ALAW:
-      *pcmEncoding = PCM_ENCODING_ALAW;
-      return "audio/raw";
-    case AV_CODEC_ID_PCM_MULAW:
-      *pcmEncoding = PCM_ENCODING_ULAW;
-      return "audio/raw";
-    default:
-      return nullptr;
-  }
-}
-
-const char* subtitleMime(AVCodecID id) {
-  switch (id) {
-    case AV_CODEC_ID_SUBRIP:
-      return "application/x-subrip";
-    case AV_CODEC_ID_ASS:
-    case AV_CODEC_ID_SSA:
-      return "text/x-ssa";
-    case AV_CODEC_ID_WEBVTT:
-      return "text/vtt";
-    case AV_CODEC_ID_HDMV_PGS_SUBTITLE:
-      return "application/pgs";
-    case AV_CODEC_ID_DVD_SUBTITLE:
-      // media3's VobsubParser takes the .idx text (Matroska CodecPrivate,
-      // surfaced verbatim as extradata) as initialization data and the raw
-      // SPU payloads as samples — exactly what this path delivers.
-      return "application/vobsub";
-    default:
-      // DVB subtitles are deliberately dropped: media3's DvbParser expects
-      // the TS/PMT 5-byte config, not Matroska CodecPrivate, and DVB rides
-      // TS in practice — which stays on media3's extractor.
-      return nullptr;
-  }
-}
-
-// Maps an attachment ordinal to its stream index. Attachment payloads
-// (embedded fonts) ride extradata and are fully parsed during
-// avformat_open_input; these streams never produce packets.
-int attachmentStreamIndex(AVFormatContext* format, jint ordinal) {
-  jint seen = 0;
-  for (unsigned i = 0; i < format->nb_streams; i++) {
-    AVCodecParameters* params = format->streams[i]->codecpar;
-    if (params->codec_type != AVMEDIA_TYPE_ATTACHMENT) continue;
-    if (params->extradata == nullptr || params->extradata_size <= 0) continue;
-    if (seen++ == ordinal) return static_cast<int>(i);
-  }
-  return -1;
-}
-
-}  // namespace
-
-extern "C" {
-
-JNIEXPORT jstring JNICALL
-Java_com_edde746_plezy_exoplayer_FfmpegDemuxerJni_nativeProbeFormat(JNIEnv* env, jobject thiz, jbyteArray header) {
-  StateLock lock;
-  jsize size = env->GetArrayLength(header);
-  std::vector<uint8_t> padded(static_cast<size_t>(size) + AVPROBE_PADDING_SIZE, 0);
-  env->GetByteArrayRegion(header, 0, size, reinterpret_cast<jbyte*>(padded.data()));
-
-  AVProbeData probe{};
-  probe.buf = padded.data();
-  probe.buf_size = size;
-  probe.filename = "";
-  int score = 0;
-  const AVInputFormat* format = av_probe_input_format2(&probe, 1, &score);
-  if (format == nullptr || score <= 0) return nullptr;
-  return env->NewStringUTF(format->name);
-}
-
-// Returns 0 on success or a negative AVERROR (ERR_JAVA when the byte source
-// itself threw). The stream count is NOT the return value: positive counts
-// would share the result-code namespace, so callers use nativeStreamCount().
-JNIEXPORT jint JNICALL
-Java_com_edde746_plezy_exoplayer_FfmpegDemuxerJni_nativeOpen(JNIEnv* env, jobject thiz, jobject input) {
-  StateLock lock;
-  if (gVm == nullptr) {
-    env->GetJavaVM(&gVm);
-    av_log_set_level(AV_LOG_ERROR);
-  }
-  if (gState == nullptr) {
-    gState = new DemuxState();
-    gState->vm = gVm;
-  }
-  DemuxState* s = gState;
-
-  // FindClass on the declared interface (not GetObjectClass on the concrete
-  // proxy): JNI dispatches interface method IDs virtually, and the named
-  // class is what the shrinker keep in proguard-rules.pro pins.
-  jclass inputClass = env->FindClass("com/edde746/plezy/exoplayer/FfmpegDemuxerJni$Input");
-  if (inputClass == nullptr) {
-    javaClear(env);
-    return ERR_NOT_OPEN;
-  }
-  jmethodID midPosition = env->GetMethodID(inputClass, "position", "()J");
-  jmethodID midRead = env->GetMethodID(inputClass, "read", "([BI)I");
-  jmethodID midReadAt = env->GetMethodID(inputClass, "readAt", "(J[BI)I");
-  jmethodID midLength = env->GetMethodID(inputClass, "length", "()J");
-  env->DeleteLocalRef(inputClass);
-  if (midPosition == nullptr || midRead == nullptr || midReadAt == nullptr || midLength == nullptr) {
-    javaClear(env);
-    return ERR_NOT_OPEN;
-  }
-
-  // A fresh open replaces any previous proxy binding.
-  if (s->input != nullptr) {
-    if (s->readBuffer != nullptr) env->DeleteGlobalRef(s->readBuffer);
-    env->DeleteGlobalRef(s->input);
-    s->input = nullptr;
-    s->readBuffer = nullptr;
-  }
-  s->input = env->NewGlobalRef(input);
-  s->midPosition = midPosition;
-  s->midRead = midRead;
-  s->midReadAt = midReadAt;
-  s->midLength = midLength;
-  jbyteArray readBuffer = env->NewByteArray(kReadChunkBytes);
-  s->readBuffer = static_cast<jbyteArray>(env->NewGlobalRef(readBuffer));
-  env->DeleteLocalRef(readBuffer);
-
-  if (s->packet == nullptr) {
-    s->packet = av_packet_alloc();
-    s->filteredPacket = av_packet_alloc();
-    if (s->packet == nullptr || s->filteredPacket == nullptr) return AVERROR(ENOMEM);
-  }
-
-  // One AVIOContext per item: a stale buffer or a sticky error from the
-  // previous item must not leak into this open, and reallocating is cheaper
-  // than reasoning about which of libavformat's internal fields to reset.
-  freeAvio(s);
-  constexpr int kAvioBufferSize = 64 * 1024;
-  unsigned char* avioBuffer = static_cast<unsigned char*>(av_malloc(kAvioBufferSize));
-  if (avioBuffer == nullptr) return AVERROR(ENOMEM);
-  s->avio = avio_alloc_context(
-      avioBuffer, kAvioBufferSize, /*write_flag=*/0, s, avioReadPacket,
-      /*write_packet=*/nullptr, avioSeek);
-  if (s->avio == nullptr) {
-    av_freep(&avioBuffer);
-    return AVERROR(ENOMEM);
-  }
-
-  s->javaError = false;
-  s->packetPending = false;
-  s->logicalPos = 0;
-  // Nothing is ever resumed across calls now: every read succeeds at the
-  // position libavformat asked for, so open_input and find_stream_info each
-  // run once, to completion.
-  avformat_close_input(&s->format);
-  s->opened = false;
-
-  s->format = avformat_alloc_context();
-  if (s->format == nullptr) return AVERROR(ENOMEM);
-  s->format->pb = s->avio;
-  // Generate missing PTS: some raw streams (MPEG-TS after a seek) present
-  // packets without timestamps that media3 cannot schedule.
-  s->format->flags |= AVFMT_FLAG_GENPTS;
-
-  int err = avformat_open_input(&s->format, "", nullptr, nullptr);
-  if (s->javaError) return ERR_JAVA;
-  if (err < 0) {
-    LOGW("avformat_open_input failed: %d", err);
-    return err;
-  }
-
-  err = avformat_find_stream_info(s->format, nullptr);
-  if (s->javaError) return ERR_JAVA;
-  if (err < 0) {
-    LOGW("avformat_find_stream_info failed: %d", err);
-    return err;
-  }
-  // Zero-base the timeline: delivered pts subtract this so media3 sees
-  // [0, duration] even when the container starts at a nonzero PCR/PTS.
-  s->startTimeUs = s->format->start_time != AV_NOPTS_VALUE ? s->format->start_time : 0;
-  s->opened = true;
-
-  bool anySupported = false;
-  for (unsigned i = 0; i < s->format->nb_streams; i++) {
-    AVStream* stream = s->format->streams[i];
-    AVCodecID codecId = stream->codecpar->codec_id;
-    jint pcmEncoding;
-    bool supported = videoMime(codecId) != nullptr || audioMime(codecId, &pcmEncoding) != nullptr ||
-                     subtitleMime(codecId) != nullptr;
-    // ID3/MKV attached pictures surface as video streams; media3 cannot
-    // render them as tracks.
-    if (stream->attached_pic.size > 0) supported = false;
-    if (!supported) {
-      LOGW("Dropping stream %u: unsupported codec %s", i, avcodec_get_name(codecId));
-      stream->discard = AVDISCARD_ALL;
-    } else {
-      anySupported = true;
-    }
-  }
-  if (!anySupported) {
-    // Fail fast so the session falls back (mpv decodes WMV and friends)
-    // instead of buffering an empty track list forever.
-    LOGW("No supported streams; refusing container");
-    avformat_close_input(&s->format);
-    s->opened = false;
-    return AVERROR(ENOSYS);
-  }
-  // MediaCodec requires Annex-B start-code framing for H264/HEVC, while the
-  // matroska/mp4 family stores length-prefixed NAL units and libavformat
-  // hands those through verbatim (ffmpeg muxers insert the same
-  // *_mp4toannexb bitstream filters in this situation). Filter those streams
-  // here so every packet leaving the shim is decoder-ready, and adopt the
-  // filter's rewritten parameters so extradata surfaces as Annex-B csd too.
-  if (s->bsf != nullptr) {
-    for (unsigned i = 0; i < s->nbStreams; i++) {
-      if (s->bsf[i] != nullptr) av_bsf_free(&s->bsf[i]);
-    }
-    av_freep(&s->bsf);
-  }
-  s->nbStreams = s->format->nb_streams;
-  s->bsf = static_cast<AVBSFContext**>(av_calloc(s->nbStreams, sizeof(*s->bsf)));
-  if (s->bsf == nullptr) return AVERROR(ENOMEM);
-  for (unsigned i = 0; i < s->nbStreams; i++) {
-    AVCodecID codecId = s->format->streams[i]->codecpar->codec_id;
-    const char* filterName = codecId == AV_CODEC_ID_H264   ? "h264_mp4toannexb"
-                             : codecId == AV_CODEC_ID_HEVC ? "hevc_mp4toannexb"
-                             // AVI-family MPEG-4 ASP commonly packs several VOPs into one chunk;
-                             // hardware decoders silently drop those stacks (observed as a decoder
-                             // hang with zero output), so unpack them like every ffmpeg pipeline.
-                             : codecId == AV_CODEC_ID_MPEG4 ? "mpeg4_unpack_bframes"
-                                                            : nullptr;
-    const AVBitStreamFilter* filter = av_bsf_get_by_name(filterName);
-    AVBSFContext* ctx = nullptr;
-    if (filter == nullptr || av_bsf_alloc(filter, &ctx) < 0 ||
-        avcodec_parameters_copy(ctx->par_in, s->format->streams[i]->codecpar) < 0) {
-      if (ctx != nullptr) av_bsf_free(&ctx);
-      continue;
-    }
-    ctx->time_base_in = s->format->streams[i]->time_base;
-    if (av_bsf_init(ctx) < 0) {
-      av_bsf_free(&ctx);
-      continue;
-    }
-    avcodec_parameters_copy(s->format->streams[i]->codecpar, ctx->par_out);
-    s->format->streams[i]->time_base = ctx->time_base_out;
-    s->bsf[i] = ctx;
-  }
-
-  return 0;  // Success; prepareTracks() reads the count via nativeStreamCount().
-}
-
-JNIEXPORT void JNICALL Java_com_edde746_plezy_exoplayer_FfmpegDemuxerJni_nativeClose(JNIEnv* env, jobject thiz) {
-  StateLock lock;
-  closeState();
-}
-
-JNIEXPORT jint JNICALL Java_com_edde746_plezy_exoplayer_FfmpegDemuxerJni_nativeStreamCount(JNIEnv* env, jobject thiz) {
-  StateLock lock;
-  if (gState == nullptr || gState->format == nullptr) return ERR_NOT_OPEN;
-  return static_cast<jint>(gState->format->nb_streams);
-}
-
-JNIEXPORT jlong JNICALL Java_com_edde746_plezy_exoplayer_FfmpegDemuxerJni_nativeDurationUs(JNIEnv* env, jobject thiz) {
-  StateLock lock;
-  if (gState == nullptr || gState->format == nullptr) return -1;
-  int64_t duration = gState->format->duration;
-  return duration == AV_NOPTS_VALUE ? -1 : duration;
-}
-
-// Returns true when the stream is usable and filled the out arrays.
-JNIEXPORT jboolean JNICALL Java_com_edde746_plezy_exoplayer_FfmpegDemuxerJni_nativeStreamInfo(
-    JNIEnv* env, jobject thiz, jint index, jlongArray numbers, jobjectArray strings) {
-  StateLock lock;
-  if (gState == nullptr || gState->format == nullptr || index < 0 ||
-      index >= static_cast<jint>(gState->format->nb_streams)) {
-    return JNI_FALSE;
-  }
-  AVStream* stream = gState->format->streams[index];
-  AVCodecParameters* params = stream->codecpar;
-
-  jint trackType;
-  const char* mime = nullptr;
-  jint pcmEncoding = PCM_ENCODING_NONE;
-  switch (params->codec_type) {
-    case AVMEDIA_TYPE_VIDEO:
-      trackType = 0;
-      mime = videoMime(params->codec_id);
-      break;
-    case AVMEDIA_TYPE_AUDIO:
-      trackType = 1;
-      mime = audioMime(params->codec_id, &pcmEncoding);
-      break;
-    case AVMEDIA_TYPE_SUBTITLE:
-      trackType = 2;
-      mime = subtitleMime(params->codec_id);
-      break;
-    default:
-      return JNI_FALSE;
-  }
-  if (mime == nullptr) return JNI_FALSE;
-
-  jlong info[INFO_LENGTH] = {};
-  info[INFO_TRACK_TYPE] = trackType;
-  info[INFO_WIDTH] = params->width;
-  info[INFO_HEIGHT] = params->height;
-  AVRational par = params->sample_aspect_ratio;
-  if (par.num <= 0 || par.den <= 0) par = stream->sample_aspect_ratio;
-  info[INFO_PAR_NUM] = par.num > 0 ? par.num : 1;
-  info[INFO_PAR_DEN] = par.num > 0 ? par.den : 1;
-  AVRational fps = stream->avg_frame_rate;
-  info[INFO_FPS_NUM] = fps.num > 0 ? fps.num : 0;
-  info[INFO_FPS_DEN] = fps.num > 0 ? fps.den : 0;
-  info[INFO_SAMPLE_RATE] = params->sample_rate > 0 ? params->sample_rate : -1;
-  info[INFO_CHANNELS] = params->ch_layout.nb_channels > 0 ? params->ch_layout.nb_channels : -1;
-  info[INFO_PCM_ENCODING] = pcmEncoding;
-  info[INFO_LATM] = params->codec_id == AV_CODEC_ID_AAC_LATM ? 1 : 0;
-
-  jint rotation = 0;
-  AVPacketSideData* sideData = nullptr;
-  for (int i = 0; i < params->nb_coded_side_data; i++) {
-    if (params->coded_side_data[i].type == AV_PKT_DATA_DISPLAYMATRIX) {
-      sideData = &params->coded_side_data[i];
-      break;
-    }
-  }
-  if (sideData != nullptr) {
-    double angle = av_display_rotation_get(reinterpret_cast<const int32_t*>(sideData->data));
-    if (!std::isnan(angle)) rotation = static_cast<jint>(-lround(angle));
-  }
-  info[INFO_ROTATION] = rotation;
-
-  jint selectionFlags = 0;
-  jint roleFlags = 0;
-  if (stream->disposition & AV_DISPOSITION_DEFAULT) selectionFlags |= SELECTION_FLAG_DEFAULT;
-  if (stream->disposition & AV_DISPOSITION_FORCED) selectionFlags |= SELECTION_FLAG_FORCED;
-  if (stream->disposition & AV_DISPOSITION_HEARING_IMPAIRED) roleFlags |= ROLE_FLAG_HARD_OF_HEARING;
-  if (stream->disposition & AV_DISPOSITION_VISUAL_IMPAIRED) roleFlags |= ROLE_FLAG_DESCRIPTION;
-  if (selectionFlags == 0 && trackType != 2) roleFlags |= ROLE_FLAG_MAIN;
-  info[INFO_SELECTION_FLAGS] = selectionFlags;
-  info[INFO_ROLE_FLAGS] = roleFlags;
-  info[INFO_BITRATE] = params->bit_rate > 0 ? params->bit_rate : -1;
-
-  // Dolby Vision configuration (dvcC/dvvC), surfaced by libavformat as an
-  // unpacked AVDOVIDecoderConfigurationRecord — one byte per field, not the
-  // bit-packed ISOBMFF box layout. Kotlin mirrors media3's DolbyVisionConfig
-  // to publish video/dolby-vision plus the RFC 6381 codecs string.
-  info[INFO_DOVI_PROFILE] = -1;
-  info[INFO_DOVI_LEVEL] = -1;
-  for (int i = 0; i < params->nb_coded_side_data; i++) {
-    AVPacketSideData* sd = &params->coded_side_data[i];
-    if (sd->type == AV_PKT_DATA_DOVI_CONF && sd->size >= sizeof(AVDOVIDecoderConfigurationRecord)) {
-      const AVDOVIDecoderConfigurationRecord* dovi =
-          reinterpret_cast<const AVDOVIDecoderConfigurationRecord*>(sd->data);
-      info[INFO_DOVI_PROFILE] = dovi->dv_profile;
-      info[INFO_DOVI_LEVEL] = dovi->dv_level;
-      break;
-    }
-  }
-
-  env->SetLongArrayRegion(numbers, 0, INFO_LENGTH, info);
-
-  const char* language = nullptr;
-  const char* label = nullptr;
-  if (stream->metadata != nullptr) {
-    AVDictionaryEntry* entry = av_dict_get(stream->metadata, "language", nullptr, 0);
-    if (entry != nullptr) language = entry->value;
-    entry = av_dict_get(stream->metadata, "title", nullptr, 0);
-    if (entry != nullptr) label = entry->value;
-  }
-  env->SetObjectArrayElement(strings, 0, env->NewStringUTF(mime));
-  env->SetObjectArrayElement(strings, 1, language != nullptr ? env->NewStringUTF(language) : nullptr);
-  env->SetObjectArrayElement(strings, 2, label != nullptr ? env->NewStringUTF(label) : nullptr);
-  return JNI_TRUE;
-}
-
-JNIEXPORT jbyteArray JNICALL
-Java_com_edde746_plezy_exoplayer_FfmpegDemuxerJni_nativeStreamExtradata(JNIEnv* env, jobject thiz, jint index) {
-  StateLock lock;
-  if (gState == nullptr || gState->format == nullptr || index < 0 ||
-      index >= static_cast<jint>(gState->format->nb_streams)) {
-    return nullptr;
-  }
-  AVCodecParameters* params = gState->format->streams[index]->codecpar;
-  // libavformat carries the AVI stream's WAVEFORMATEX header as MP3
-  // extradata. MediaCodec mp3 decoders expect either no csd or the two-byte
-  // ISO header, and report a WAVEFORMATEX blob as corrupt input
-  // (C2_CORRUPTED on the first work item), so drop it.
-  if (params->codec_id == AV_CODEC_ID_MP3) return nullptr;
-  if (params->extradata == nullptr || params->extradata_size <= 0) return nullptr;
-  jbyteArray result = env->NewByteArray(params->extradata_size);
-  env->SetByteArrayRegion(result, 0, params->extradata_size, reinterpret_cast<const jbyte*>(params->extradata));
-  return result;
-}
-
-JNIEXPORT jint JNICALL
-Java_com_edde746_plezy_exoplayer_FfmpegDemuxerJni_nativeAttachmentCount(JNIEnv* env, jobject thiz) {
-  StateLock lock;
-  if (gState == nullptr || gState->format == nullptr) return 0;
-  jint count = 0;
-  while (attachmentStreamIndex(gState->format, count) >= 0) count++;
-  return count;
-}
-
-// Fills strings with [filename, mimetype] and returns the payload size in
-// bytes, or -1 when the ordinal is out of range.
-JNIEXPORT jlong JNICALL Java_com_edde746_plezy_exoplayer_FfmpegDemuxerJni_nativeAttachmentInfo(
-    JNIEnv* env, jobject thiz, jint ordinal, jobjectArray strings) {
-  StateLock lock;
-  if (gState == nullptr || gState->format == nullptr) return -1;
-  int index = attachmentStreamIndex(gState->format, ordinal);
-  if (index < 0) return -1;
-  AVStream* stream = gState->format->streams[index];
-  const char* filename = nullptr;
-  const char* mimetype = nullptr;
-  if (stream->metadata != nullptr) {
-    AVDictionaryEntry* entry = av_dict_get(stream->metadata, "filename", nullptr, 0);
-    if (entry != nullptr) filename = entry->value;
-    entry = av_dict_get(stream->metadata, "mimetype", nullptr, 0);
-    if (entry != nullptr) mimetype = entry->value;
-  }
-  env->SetObjectArrayElement(strings, 0, filename != nullptr ? env->NewStringUTF(filename) : nullptr);
-  env->SetObjectArrayElement(strings, 1, mimetype != nullptr ? env->NewStringUTF(mimetype) : nullptr);
-  return stream->codecpar->extradata_size;
-}
-
-JNIEXPORT jbyteArray JNICALL
-Java_com_edde746_plezy_exoplayer_FfmpegDemuxerJni_nativeAttachmentData(JNIEnv* env, jobject thiz, jint ordinal) {
-  StateLock lock;
-  if (gState == nullptr || gState->format == nullptr) return nullptr;
-  int index = attachmentStreamIndex(gState->format, ordinal);
-  if (index < 0) return nullptr;
-  AVCodecParameters* params = gState->format->streams[index]->codecpar;
-  jbyteArray result = env->NewByteArray(params->extradata_size);
-  if (result == nullptr) return nullptr;
-  env->SetByteArrayRegion(result, 0, params->extradata_size, reinterpret_cast<const jbyte*>(params->extradata));
-  return result;
-}
-
-// Reads one packet. out[0] carries the result code; on CODE_PACKET the packet
-// bytes were written into the byte array and out carries
-// [1]=streamIndex [2]=ptsUs (start-time normalized; packets without any
-// timestamp are dropped, media3 cannot schedule them) [3]=flags [4]=size
-// [5]=packet position in input coordinates [6]=durationUs (-1 unknown).
-JNIEXPORT jint JNICALL Java_com_edde746_plezy_exoplayer_FfmpegDemuxerJni_nativeReadPacket(
-    JNIEnv* env, jobject thiz, jbyteArray buffer, jlongArray out) {
-  StateLock lock;
-  DemuxState* s = gState;
-  if (s == nullptr || !s->opened || s->format == nullptr) return ERR_NOT_OPEN;
-
-  jint capacity = env->GetArrayLength(buffer);
-  jlong result[7] = {};
-  s->javaError = false;
-  while (true) {
-    if (s->packetPending) {
-      // Oversized packet held across a CODE_GROW round trip: deliver it now
-      // instead of reading (and losing) a new frame.
-      s->packetPending = false;
-    } else {
-      av_packet_unref(s->packet);
-      int err = av_read_frame(s->format, s->packet);
-      if (err == AVERROR_EOF) {
-        result[0] = CODE_EOF;
-        env->SetLongArrayRegion(out, 0, 7, result);
-        return CODE_EOF;
-      }
-      if (err < 0 || s->javaError) {
-        result[0] = s->javaError ? ERR_JAVA : err;
-        env->SetLongArrayRegion(out, 0, 7, result);
-        return s->javaError ? ERR_JAVA : err;
-      }
-      if (s->packet->size <= 0) continue;
-
-      if (s->format->streams[s->packet->stream_index]->discard >= AVDISCARD_ALL) continue;
-
-      AVBSFContext* bsf = s->bsf != nullptr && s->packet->stream_index < static_cast<int>(s->nbStreams)
-                              ? s->bsf[s->packet->stream_index]
-                              : nullptr;
-      if (bsf != nullptr) {
-        // send consumes the packet reference; move the filtered result back so
-        // the delivery code below keeps a single code path.
-        int filterErr = av_bsf_send_packet(bsf, s->packet);
-        if (filterErr >= 0) {
-          av_packet_unref(s->packet);
-          filterErr = av_bsf_receive_packet(bsf, s->filteredPacket);
-          if (filterErr == AVERROR(EAGAIN)) continue;
-          if (filterErr < 0) {
-            result[0] = filterErr;
-            env->SetLongArrayRegion(out, 0, 7, result);
-            return filterErr;
-          }
-          av_packet_move_ref(s->packet, s->filteredPacket);
-        } else {
-          result[0] = filterErr;
-          env->SetLongArrayRegion(out, 0, 7, result);
-          return filterErr;
-        }
-      }
-    }
-    int size = s->packet->size;
-    if (size > capacity) {
-      s->packetPending = true;
-      result[0] = CODE_GROW;
-      result[4] = size;
-      env->SetLongArrayRegion(out, 0, 7, result);
-      return CODE_GROW;
-    }
-    env->SetByteArrayRegion(buffer, 0, size, reinterpret_cast<const jbyte*>(s->packet->data));
-
-    AVStream* stream = s->format->streams[s->packet->stream_index];
-    int64_t ptsUs;
-    if (s->packet->pts != AV_NOPTS_VALUE) {
-      ptsUs = av_rescale_q(s->packet->pts, stream->time_base, AVRational{1, 1000000});
-    } else if (s->packet->dts != AV_NOPTS_VALUE) {
-      ptsUs = av_rescale_q(s->packet->dts, stream->time_base, AVRational{1, 1000000});
-    } else {
-      // No timestamp even after GENPTS: media3 cannot schedule the sample,
-      // and delivering data without metadata would corrupt the sample queue.
-      continue;
-    }
-    ptsUs -= s->startTimeUs;
-
-    result[0] = CODE_PACKET;
-    result[1] = s->packet->stream_index;
-    result[2] = ptsUs;
-    result[3] = (s->packet->flags & AV_PKT_FLAG_KEY) != 0 ? 1 : 0;
-    result[4] = size;
-    result[5] = s->packet->pos >= 0 ? s->packet->pos : 0;
-    result[6] =
-        s->packet->duration > 0 ? av_rescale_q(s->packet->duration, stream->time_base, AVRational{1, 1000000}) : -1;
-    env->SetLongArrayRegion(out, 0, 7, result);
-    return CODE_PACKET;
-  }
-}
-
-JNIEXPORT jlong JNICALL
-Java_com_edde746_plezy_exoplayer_FfmpegDemuxerJni_nativeLogicalPosition(JNIEnv* env, jobject thiz) {
-  StateLock lock;
-  DemuxState* s = gState;
-  if (s == nullptr || !s->opened) return -1;
-  return static_cast<jlong>(s->logicalPos);
-}
-
-// Seeks to a presentation time (media3 timeline microseconds, start-time
-// normalized). Called on the loader thread, where blocking IO belongs:
-// libavformat reads its own index through the random-access source, so this
-// either lands on the target keyframe or reports that the container has no
-// usable index.
-JNIEXPORT jint JNICALL
-Java_com_edde746_plezy_exoplayer_FfmpegDemuxerJni_nativeSeek(JNIEnv* env, jobject thiz, jlong timeUs) {
-  StateLock lock;
-  DemuxState* s = gState;
-  if (s == nullptr || !s->opened || s->format == nullptr) return ERR_NOT_OPEN;
-  s->javaError = false;
-  // Any packet parked for a CODE_GROW retry belongs to the pre-seek stream.
-  s->packetPending = false;
-  if (s->bsf != nullptr) {
-    for (unsigned i = 0; i < s->nbStreams; i++) {
-      if (s->bsf[i] != nullptr) av_bsf_flush(s->bsf[i]);
-    }
-  }
-  const int64_t ts = timeUs + s->startTimeUs;
-  const int err = avformat_seek_file(s->format, -1, INT64_MIN, ts, ts, 0);
-  if (s->javaError) return ERR_JAVA;
-  if (err < 0) {
-    LOGW("seek to %lld failed: %d", (long long)ts, err);
-    return err;
-  }
-  LOGD("seek to %lld: logical=%lld", (long long)ts, (long long)s->logicalPos);
-  return 0;
-}
-
-}  // extern "C"
@@ -28,6 +28,12 @@ internal class ExternalPlayerChannel(private val activity: Activity) {
    private const val API_VLC_RESULT_POSITION = "extra_position"
    private const val API_VLC_RESULT_DURATION = "extra_duration"

+    // Honored by VLC and the native Zidoo player (com.android.gallery3d /
+    // com.zidoo.player). Without it, a launch with no resume point lets the
+    // player consult its own bookmark store, which on Zidoo collides across
+    // Plex items because every part URL ends in the same `file.<ext>` (#2223).
+    private const val API_VLC_FROM_START = "from_start"
+
    private const val API_VIMU_TITLE = "forcename"
    private const val API_VIMU_SEEK_POSITION = "startfrom"
    private const val API_VIMU_RESUME = "forceresume"
@@ -150,7 +156,7 @@ internal class ExternalPlayerChannel(private val activity: Activity) {
    }
  }

-  private data class Source(val uri: Uri, val grantRead: Boolean, val fileName: String?)
+  internal data class Source(val uri: Uri, val grantRead: Boolean, val fileName: String?)

  private fun resolveSource(filePath: String): Source {
    if (filePath.startsWith("http://") || filePath.startsWith("https://")) {
@@ -168,7 +174,7 @@ internal class ExternalPlayerChannel(private val activity: Activity) {
    return Source(uri, grantRead = true, fileName = file.name)
  }

-  private fun buildIntent(
+  internal fun buildIntent(
    source: Source,
    packageName: String?,
    startPositionMs: Long,
@@ -181,6 +187,9 @@ internal class ExternalPlayerChannel(private val activity: Activity) {
    if (startPosition > 0) {
      putExtra(API_MX_RESULT_POSITION, startPosition)
      putExtra(API_VIMU_SEEK_POSITION, startPosition)
+      putExtra(API_VLC_FROM_START, false)
+    } else {
+      putExtra(API_VLC_FROM_START, true)
    }
    putExtra(API_MX_RETURN_RESULT, true)
    putExtra(API_MX_SECURE_URI, true)
@@ -31,7 +31,9 @@ import com.edde746.plezy.car.CarRestrictionsMonitor
 import com.edde746.plezy.exoplayer.ExoPlayerPlugin
 import com.edde746.plezy.mpv.MpvAudioPlayerPlugin
 import com.edde746.plezy.mpv.MpvPlayerPlugin
+import com.edde746.plezy.shared.AssistiveTechnologyMonitor
 import com.edde746.plezy.shared.DeviceQuirks
+import com.edde746.plezy.shared.MediaCodecQuery
 import com.edde746.plezy.shared.ThemeHelper
 import com.edde746.plezy.watchnext.WatchNextPlugin
 import io.flutter.embedding.android.FlutterActivity
@@ -95,9 +97,12 @@ class MainActivity : FlutterActivity() {
  private val TEXT_INPUT_CHANNEL = "com.plezy/text_input"
  private val APP_EXIT_CHANNEL = "com.plezy/app_exit"
  private val CAR_RESTRICTIONS_CHANNEL = "com.plezy/car_restrictions"
+  private val ASSISTIVE_TECHNOLOGY_CHANNEL = "com.plezy/assistive_technology"
  private var watchNextPlugin: WatchNextPlugin? = null
  private var carRestrictions: CarRestrictionsMonitor? = null
  private var carRestrictionsChannel: MethodChannel? = null
+  private var assistiveTechnology: AssistiveTechnologyMonitor? = null
+  private var assistiveTechnologyChannel: MethodChannel? = null
  private var nativeTextInputFocused = false
  private val imeRecoveryHandler = Handler(Looper.getMainLooper())
  private var imeShowAttempts = 0
@@ -592,6 +597,9 @@ class MainActivity : FlutterActivity() {
    carRestrictions?.release()
    carRestrictions = null
    carRestrictionsChannel = null
+    assistiveTechnology?.release()
+    assistiveTechnology = null
+    assistiveTechnologyChannel = null
    activityStarted = false
    flutterSurfaceReconnectPending = false
    flutterTextureView = null
@@ -735,6 +743,7 @@ class MainActivity : FlutterActivity() {
        "getTvDetection" -> result.success(getAndroidTvDetection())
        "getDeviceName" -> result.success(getDeviceName())
        "getPerformanceSignals" -> result.success(getPerformanceSignals())
+        "getVideoDecodeCapabilities" -> result.success(MediaCodecQuery.hardwareVideoDecodeSupport())
        "getBackgroundWorkSignals" -> result.success(
          BackgroundWorkClassifier.toMap(BackgroundWorkDiagnostics.read(this))
        )
@@ -779,6 +788,19 @@ class MainActivity : FlutterActivity() {
      }
    }

+    val assistiveChannel = MethodChannel(flutterEngine.dartExecutor.binaryMessenger, ASSISTIVE_TECHNOLOGY_CHANNEL)
+    assistiveTechnologyChannel = assistiveChannel
+    val assistiveMonitor = assistiveTechnology ?: AssistiveTechnologyMonitor(applicationContext).also {
+      assistiveTechnology = it
+    }
+    assistiveMonitor.start { runOnUiThread { assistiveTechnologyChannel?.invokeMethod("onChanged", null) } }
+    assistiveChannel.setMethodCallHandler { call, result ->
+      when (call.method) {
+        "getSignals" -> result.success(assistiveMonitor.signals())
+        else -> result.notImplemented()
+      }
+    }
+
    MethodChannel(flutterEngine.dartExecutor.binaryMessenger, DEVICE_ADJUSTMENT_CHANNEL).setMethodCallHandler { call, result ->
      handleDeviceAdjustmentCall(call.method, call.arguments, result)
    }
@@ -76,58 +76,93 @@ internal fun isPcmEncoding(encoding: Int): Boolean = when (encoding) {
  else -> false
 }

-/**
- * mpv `audio-spdif` codec names and the exact platform encoding a route must
- * advertise to carry that bitstream.
- *
- * Only the codecs mpv's audiotrack AO can physically carry are listed. That AO opens every
- * spdif format as a stereo `ENCODING_IEC61937` track and clamps the track rate to
- * `getNativeOutputSampleRate` (the 48kHz mixer rate), so E-AC3 (a 192kHz burst), TrueHD
- * (192kHz/8ch MAT) and DTS-HD MA (192kHz/8ch) can never leave that AO intact. Naming one
- * anyway force-passes the codec into a track that cannot carry it (#1991); those streams
- * decode to PCM instead, like every other unnamed codec.
- */
-private val MPV_SPDIF_CODECS: List<Pair<String, Int>> = listOf(
-  "ac3" to C.ENCODING_AC3,
-  "dts" to C.ENCODING_DTS
+/** The IEC 61937 track shape a codec's spdif burst rides. */
+internal enum class MpvIecShape { STEREO_48K, STEREO_192K, SURROUND_192K }
+
+private class MpvSpdifCodec(
+  val name: String,
+  val encoding: Int,
+  val shape: MpvIecShape,
+  /** Whether the fork's audiotrack AO opens this codec as a raw bitstream track first. */
+  val raw: Boolean = false
 )

 /**
- * Builds an `audio-spdif` value naming only the codecs [supportsEncoding] advertises.
+ * mpv `audio-spdif` codec names, the platform encoding a route must advertise to carry that
+ * bitstream, and the track shape the fork's `ao_audiotrack` opens for it.
+ *
+ * Since the raw-passthrough patch (0102), the AO feeds AC3, E-AC3 and the DTS core to a raw
+ * `ENCODING_AC3`/`E_AC3`/`DTS` track at 48kHz/stereo — the transport ExoPlayer and Kodi use —
+ * and only falls back to the IEC 61937 carrier when the route rejects the raw encoding
+ * outright. Raw tracks keep the platform's Dolby/DTS transcoder in the path; a pre-packed IEC
+ * track bypasses it and drains into silence on routes whose sink cannot decode the codec
+ * itself (#2177's Shield in front of a Dolby-Digital-only Sonos). TrueHD (MAT) and DTS-HD MA
+ * stay on the 8-channel 192kHz IEC carrier the multichannel patch (0101) added: their raw
+ * forms are not recoverable from the burst stream.
+ *
+ * `dts-hd` supersedes plain `dts`: that literal is what selects the lossless `spdif_dts_hd`
+ * decoder, and it enables spdif for the whole `dts` codec while doing so, with the core burst
+ * still chosen per file for tracks that are not HD (`ad_spdif.c:240-249`, `:400-418`). HRA rides
+ * a 2ch/192kHz burst under the same name, so gating it on the 8-channel carrier is the
+ * conservative choice.
+ */
+private val MPV_SPDIF_CODECS: List<MpvSpdifCodec> = listOf(
+  MpvSpdifCodec("ac3", C.ENCODING_AC3, MpvIecShape.STEREO_48K, raw = true),
+  MpvSpdifCodec("eac3", C.ENCODING_E_AC3, MpvIecShape.STEREO_192K, raw = true),
+  MpvSpdifCodec("truehd", C.ENCODING_DOLBY_TRUEHD, MpvIecShape.SURROUND_192K),
+  MpvSpdifCodec("dts", C.ENCODING_DTS, MpvIecShape.STEREO_48K, raw = true),
+  MpvSpdifCodec("dts-hd", C.ENCODING_DTS_HD, MpvIecShape.SURROUND_192K)
+)
+
+/**
+ * Builds an `audio-spdif` value naming only the codecs the route can carry: [supportsEncoding]
+ * advertises the codec's encoding *and* a transport the AO's ladder can open exists —
+ * [supportsRawTrack] for the raw bitstream track it tries first, or [supportsShape] for the
+ * IEC 61937 burst it falls back to. Plain `dts` is dropped whenever `dts-hd` qualifies, which
+ * already covers the core burst.
 *
 * mpv force-passes through every codec named here and has no decode fallback, so an
 * unsupported name leaves the file rendering video against a dead audio output (#1703).
 *
 * The gate is the exact encoding rather than media3's passthrough probe on purpose. That
 * probe answers by downgrading (DTS-HD to the DTS core, E-AC3 JOC to E-AC3) and rejects
- * channel counts above the route's PCM maximum, neither of which describes what an IEC
- * 61937 track carries.
+ * channel counts above the route's PCM maximum, neither of which describes what a
+ * passthrough track carries.
 */
-internal fun mpvSpdifCodecs(supportsEncoding: (Int) -> Boolean): String = MPV_SPDIF_CODECS
-  .filter { (_, encoding) -> supportsEncoding(encoding) }
-  .joinToString(",") { (codec, _) -> codec }
+internal fun mpvSpdifCodecs(
+  supportsEncoding: (Int) -> Boolean,
+  supportsShape: (MpvIecShape) -> Boolean,
+  supportsRawTrack: (Int) -> Boolean = { false }
+): String {
+  val carried = MPV_SPDIF_CODECS.filter {
+    supportsEncoding(it.encoding) &&
+      ((it.raw && supportsRawTrack(it.encoding)) || supportsShape(it.shape))
+  }
+  val dtsHd = carried.any { it.name == "dts-hd" }
+  return (if (dtsHd) carried.filterNot { it.name == "dts" } else carried).joinToString(",") { it.name }
+}

 /**
 * [mpvSpdifCodecs] resolved against the audio route [context] is currently routed to.
 *
- * Two conditions, both required:
- * - The route must accept the exact track shape mpv opens for spdif output — stereo
- *   IEC 61937 at the 48kHz mixer rate ([supportsMpvIecShape]). Advertising the raw AC3/DTS
- *   encodings only says the receiver decodes them, not that the HAL takes an IEC 61937
- *   AudioTrack: #1991's Shield bitstreams AC3 through ExoPlayer's raw path while every mpv
- *   spdif attempt strands playback on a dead audio output, leaving nothing but AAC playable.
+ * Two conditions per codec, both required:
+ * - The route must accept a track shape the AO's ladder actually opens. For AC3, E-AC3 and the
+ *   DTS core that is the raw bitstream track probed by [supportsMpvRawTrack], with the IEC
+ *   stereo shapes ([supportsMpvIecShape], [supportsMpvHighRateIecShape]) as the AO's fallback
+ *   transport; TrueHD and DTS-HD MA need the 192kHz/7.1 carrier ([supportsIecCarrier]).
+ *   Advertising the raw encoding only says the receiver decodes it, not that the HAL takes the
+ *   track: #1991's Shield strands playback on every mpv IEC attempt while bitstreaming AC3 raw.
+ *   The probes are independent, so none of them may veto the whole list: a route that takes the
+ *   192kHz carrier but no raw track still bitstreams TrueHD and DTS-HD MA.
 * - The receiver must decode the codec itself — the raw encoding on the current
- *   [AudioCapabilities] — because IEC 61937 is transport, not transcoding.
+ *   [AudioCapabilities] — because passthrough is transport, not transcoding. (On a raw track
+ *   the platform may additionally transcode, which is exactly why the AO prefers it.)
 */
 // Deprecated only in favour of an overload that also takes spatializer channel masks, which
 // do not affect bitstream routing. Same probe ExoPlayerCore's TrueHD decision uses.
@Suppress("DEPRECATION")
@OptIn(UnstableApi::class)
 internal fun supportedMpvSpdifCodecs(context: Context): String {
-  if (!supportsMpvIecShape(context)) {
-    Log.i(TAG, "Route takes no stereo IEC 61937 track; mpv will decode instead of bitstreaming")
-    return ""
-  }
  val audioAttributes = AudioAttributes.Builder()
    .setContentType(C.AUDIO_CONTENT_TYPE_MOVIE)
    .setUsage(C.USAGE_MEDIA)
@@ -138,12 +173,32 @@ internal fun supportedMpvSpdifCodecs(context: Context): String {
    Log.w(TAG, "Audio route capabilities unavailable; mpv will decode instead of bitstreaming", error)
    return ""
  }
-  return mpvSpdifCodecs(capabilities::supportsEncoding)
+  // Every probe costs real route calls and may be shared by more than one codec, so probe once.
+  val shapeProbed = HashMap<MpvIecShape, Boolean>(3)
+  val rawProbed = HashMap<Int, Boolean>(3)
+  val codecs = mpvSpdifCodecs(
+    capabilities::supportsEncoding,
+    { shape -> shapeProbed.getOrPut(shape) { routeTakesIecShape(context, shape) } },
+    { encoding -> rawProbed.getOrPut(encoding) { supportsMpvRawTrack(context, encoding) } }
+  )
+  if (codecs.isEmpty()) {
+    Log.i(TAG, "Route takes no passthrough track mpv can fill; mpv will decode instead of bitstreaming")
+  } else {
+    Log.i(TAG, "mpv will bitstream: $codecs")
+  }
+  return codecs
 }

-/** The track shape mpv's audiotrack AO opens for spdif output: stereo IEC 61937 at the mixer rate. */
+private fun routeTakesIecShape(context: Context, shape: MpvIecShape): Boolean = when (shape) {
+  MpvIecShape.STEREO_48K -> supportsMpvIecShape(context)
+  MpvIecShape.STEREO_192K -> supportsMpvHighRateIecShape(context)
+  MpvIecShape.SURROUND_192K -> supportsIecCarrier(context)
+}
+
+/** The track shape mpv's audiotrack AO opens for an AC3 or DTS-core burst: stereo at the mixer rate. */
 private const val MPV_IEC_SAMPLE_RATE = 48_000
 private const val MPV_IEC_CHANNEL_COUNT = 2
+private const val MPV_IEC_HIGH_SAMPLE_RATE = 192_000

 internal fun supportsMpvIecShape(context: Context): Boolean = iecRouteSupported(
  sdkInt = Build.VERSION.SDK_INT,
@@ -161,6 +216,47 @@ internal fun supportsMpvIecShape(context: Context): Boolean = iecRouteSupported(
  hdmiRouteAdvertised = { hdmiAdvertisesIecRoute(context, MPV_IEC_SAMPLE_RATE, MPV_IEC_CHANNEL_COUNT) }
 )

+/**
+ * Whether the route takes a raw bitstream `AudioTrack` for [encoding] at the shape the fork's
+ * `ao_audiotrack` opens first: the codec frame rate with a stereo mask (Kodi's raw shape; the
+ * HAL reads the real channel layout from the bitstream). Same probe tiering as the IEC shapes,
+ * except below API 29, where no runtime oracle exists for raw tracks and media3 gates its raw
+ * path on the advertised encoding alone — which [supportedMpvSpdifCodecs] already requires via
+ * [AudioCapabilities]. #1991's API 28 Shield bitstreams AC3 exactly this way.
+ */
+internal fun supportsMpvRawTrack(context: Context, encoding: Int): Boolean = iecRouteSupported(
+  sdkInt = Build.VERSION.SDK_INT,
+  canSizeBuffer = { canSizeDirectBuffer(MPV_IEC_SAMPLE_RATE, AudioFormat.CHANNEL_OUT_STEREO, encoding) },
+  // The SDK_INT guards repeat iecRouteSupported's tiering only because lint's NewApi
+  // check cannot see through the injected lambdas.
+  bitstreamSupported = {
+    Build.VERSION.SDK_INT >= Build.VERSION_CODES.TIRAMISU &&
+      iecBitstreamSupported(directProbeFormat(encoding, MPV_IEC_SAMPLE_RATE, AudioFormat.CHANNEL_OUT_STEREO))
+  },
+  directPlaybackSupported = {
+    Build.VERSION.SDK_INT >= Build.VERSION_CODES.Q &&
+      iecDirectPlaybackSupported(directProbeFormat(encoding, MPV_IEC_SAMPLE_RATE, AudioFormat.CHANNEL_OUT_STEREO))
+  },
+  hdmiRouteAdvertised = { true }
+)
+
+/** E-AC3's geometry: the stereo shape at the 192kHz burst rate, same route tiering as the others. */
+internal fun supportsMpvHighRateIecShape(context: Context): Boolean = iecRouteSupported(
+  sdkInt = Build.VERSION.SDK_INT,
+  canSizeBuffer = { canSizeIecBuffer(MPV_IEC_HIGH_SAMPLE_RATE, AudioFormat.CHANNEL_OUT_STEREO) },
+  // The SDK_INT guards repeat iecRouteSupported's tiering only because lint's NewApi
+  // check cannot see through the injected lambdas.
+  bitstreamSupported = {
+    Build.VERSION.SDK_INT >= Build.VERSION_CODES.TIRAMISU &&
+      iecBitstreamSupported(iecProbeFormat(MPV_IEC_HIGH_SAMPLE_RATE, AudioFormat.CHANNEL_OUT_STEREO))
+  },
+  directPlaybackSupported = {
+    Build.VERSION.SDK_INT >= Build.VERSION_CODES.Q &&
+      iecDirectPlaybackSupported(iecProbeFormat(MPV_IEC_HIGH_SAMPLE_RATE, AudioFormat.CHANNEL_OUT_STEREO))
+  },
+  hdmiRouteAdvertised = { hdmiAdvertisesIecRoute(context, MPV_IEC_HIGH_SAMPLE_RATE, MPV_IEC_CHANNEL_COUNT) }
+)
+
 /**
 * Whether this route can carry a packed bitstream inside IEC 61937 at 192kHz/7.1 — TrueHD as MAT
 * (#1804) and DTS-HD MA as DTS type IV (#1988) both ride this exact tuple.
@@ -226,8 +322,10 @@ internal fun iecRouteSupported(
  else -> hdmiRouteAdvertised()
 }

-private fun canSizeIecBuffer(sampleRate: Int, channelMask: Int): Boolean = try {
-  AudioTrack.getMinBufferSize(sampleRate, channelMask, AudioFormat.ENCODING_IEC61937) > 0
+private fun canSizeIecBuffer(sampleRate: Int, channelMask: Int): Boolean = canSizeDirectBuffer(sampleRate, channelMask, AudioFormat.ENCODING_IEC61937)
+
+private fun canSizeDirectBuffer(sampleRate: Int, channelMask: Int, encoding: Int): Boolean = try {
+  AudioTrack.getMinBufferSize(sampleRate, channelMask, encoding) > 0
 } catch (error: Exception) {
  false
 }
@@ -272,8 +370,10 @@ private fun hdmiAdvertisesIecRoute(context: Context, sampleRate: Int, channelCou
 }

 /** The exact tuple an IEC output's `AudioTrack` is built with; see [PlezyRenderersFactory]. */
-private fun iecProbeFormat(sampleRate: Int, channelMask: Int): AudioFormat = AudioFormat.Builder()
-  .setEncoding(AudioFormat.ENCODING_IEC61937)
+private fun iecProbeFormat(sampleRate: Int, channelMask: Int): AudioFormat = directProbeFormat(AudioFormat.ENCODING_IEC61937, sampleRate, channelMask)
+
+private fun directProbeFormat(encoding: Int, sampleRate: Int, channelMask: Int): AudioFormat = AudioFormat.Builder()
+  .setEncoding(encoding)
  .setChannelMask(channelMask)
  .setSampleRate(sampleRate)
  .build()
@@ -0,0 +1,226 @@
+package com.edde746.plezy.exoplayer
+
+import android.util.Log
+import androidx.media3.common.C
+import androidx.media3.extractor.Extractor
+import androidx.media3.extractor.ExtractorInput
+import androidx.media3.extractor.ExtractorOutput
+import androidx.media3.extractor.PositionHolder
+import androidx.media3.extractor.SeekMap
+import androidx.media3.extractor.SeekPoint
+import androidx.media3.extractor.TrackAwareSeekMap
+import androidx.media3.extractor.TrackOutput
+import java.util.concurrent.CopyOnWriteArrayList
+
+/**
+ * Extractor wrapper that repairs seeking for MKV files media3 reports as unseekable.
+ *
+ * Two repairs, in priority order:
+ * - [SeekMap.Unseekable] with a known duration (no Cues element at all): replaced with a
+ *   proportional byte-position estimate, resynced to the nearest Cluster boundary after seeking.
+ * - A [TrackAwareSeekMap] whose [SeekMap.isSeekable] is false (media3 1.11.0 builds the Matroska
+ *   seek map while parsing Cues, which for files whose Tracks element follows the Clusters is
+ *   before any track is known — the primary seek track stays unset even though the Cues parsed):
+ *   wrapped so seeks resolve through the per-track cue lookups using the track IDs observed on
+ *   this output.
+ */
+@androidx.media3.common.util.UnstableApi
+class CuelessSeekExtractorWrapper(
+  private val delegate: Extractor
+) : Extractor {
+
+  companion object {
+    private const val TAG = "CuelessSeek"
+
+    // MKV Cluster element ID: 0x1F43B675 (4-byte EBML Class-D ID)
+    private val CLUSTER_ID = byteArrayOf(0x1F, 0x43, 0xB6.toByte(), 0x75)
+    private const val SCAN_BUFFER_SIZE = 8192
+
+    // Max bytes to scan for a Cluster boundary before giving up
+    private const val MAX_SCAN_BYTES = 1024 * 1024 // 1 MB
+  }
+
+  private var inputLength: Long = C.LENGTH_UNSET.toLong()
+  private var needsClusterResync = false
+  private var isApproximateSeeking = false
+  private var pendingSeekTimeUs: Long = C.TIME_UNSET
+
+  /** Track IDs and types observed on the output, consulted by [TrackCueSeekMap]. */
+  private val registeredTracks = CopyOnWriteArrayList<Pair<Int, Int>>()
+
+  override fun sniff(input: ExtractorInput): Boolean = delegate.sniff(input)
+
+  override fun init(output: ExtractorOutput) {
+    delegate.init(SeekInterceptingOutput(output))
+  }
+
+  override fun read(input: ExtractorInput, seekPosition: PositionHolder): Int {
+    if (inputLength == C.LENGTH_UNSET.toLong()) {
+      inputLength = input.length
+    }
+    if (needsClusterResync) {
+      needsClusterResync = false
+      return scanForCluster(input, seekPosition)
+    }
+    return delegate.read(input, seekPosition)
+  }
+
+  override fun seek(position: Long, timeUs: Long) {
+    if (isApproximateSeeking && position > 0) {
+      needsClusterResync = true
+      pendingSeekTimeUs = timeUs
+    }
+    delegate.seek(position, timeUs)
+  }
+
+  override fun release() = delegate.release()
+
+  /**
+   * Scan forward from the current input position to find the next MKV Cluster
+   * element ID (0x1F43B675). Returns [Extractor.RESULT_SEEK] with the Cluster's
+   * byte position so ExoPlayer repositions the DataSource there.
+   */
+  private fun scanForCluster(input: ExtractorInput, seekPosition: PositionHolder): Int {
+    val buffer = ByteArray(SCAN_BUFFER_SIZE)
+    var totalScanned = 0L
+    // Carry over last 3 bytes across buffer boundaries to detect split IDs
+    var carry = ByteArray(0)
+
+    while (totalScanned < MAX_SCAN_BYTES) {
+      val toRead = minOf(SCAN_BUFFER_SIZE, (MAX_SCAN_BYTES - totalScanned).toInt())
+      val bytesRead: Int
+      try {
+        bytesRead = input.read(buffer, 0, toRead)
+      } catch (_: Exception) {
+        break
+      }
+      if (bytesRead == C.RESULT_END_OF_INPUT) break
+
+      // Combine carry + new data for scanning
+      val scanData = if (carry.isNotEmpty()) carry + buffer.copyOf(bytesRead) else buffer.copyOf(bytesRead)
+
+      for (i in 0..scanData.size - 4) {
+        if (scanData[i] == CLUSTER_ID[0] &&
+          scanData[i + 1] == CLUSTER_ID[1] &&
+          scanData[i + 2] == CLUSTER_ID[2] &&
+          scanData[i + 3] == CLUSTER_ID[3]
+        ) {
+          // Compute the absolute byte position of this Cluster
+          val clusterPosition = input.position - bytesRead - carry.size + i
+          Log.d(TAG, "Found Cluster at byte $clusterPosition (scanned ${totalScanned + i} bytes)")
+          seekPosition.position = clusterPosition
+          delegate.seek(clusterPosition, pendingSeekTimeUs)
+          pendingSeekTimeUs = C.TIME_UNSET
+          return Extractor.RESULT_SEEK
+        }
+      }
+
+      // Keep last 3 bytes as carry for next iteration
+      carry = if (scanData.size >= 3) scanData.copyOfRange(scanData.size - 3, scanData.size) else scanData.copyOf()
+      totalScanned += bytesRead
+    }
+
+    // Failed to find a Cluster — fall back to position 0
+    Log.w(TAG, "No Cluster found after scanning $totalScanned bytes, resetting to start")
+    seekPosition.position = 0
+    delegate.seek(0, 0)
+    return Extractor.RESULT_SEEK
+  }
+
+  /**
+   * ExtractorOutput wrapper that intercepts [seekMap] calls to replace
+   * [SeekMap.Unseekable] with an approximate proportional SeekMap.
+   */
+  private inner class SeekInterceptingOutput(
+    private val delegate: ExtractorOutput
+  ) : ExtractorOutput {
+
+    override fun track(id: Int, type: Int): TrackOutput {
+      if (registeredTracks.none { it.first == id }) {
+        registeredTracks.add(id to type)
+      }
+      return delegate.track(id, type)
+    }
+
+    override fun endTracks() = delegate.endTracks()
+
+    override fun seekMap(seekMap: SeekMap) {
+      if (seekMap is SeekMap.Unseekable) {
+        val durationUs = seekMap.durationUs
+        if (durationUs != C.TIME_UNSET && durationUs > 0) {
+          Log.i(TAG, "Replacing Unseekable with approximate SeekMap (duration=${durationUs / 1_000_000}s)")
+          isApproximateSeeking = true
+          delegate.seekMap(ApproximateSeekMap(durationUs))
+          return
+        }
+      } else if (!seekMap.isSeekable && seekMap is TrackAwareSeekMap) {
+        Log.i(TAG, "Wrapping unseekable TrackAwareSeekMap with per-track cue seeking")
+        isApproximateSeeking = false
+        delegate.seekMap(TrackCueSeekMap(seekMap))
+        return
+      }
+      // File has real Cues or unknown duration — pass through
+      isApproximateSeeking = false
+      delegate.seekMap(seekMap)
+    }
+  }
+
+  /**
+   * Approximate SeekMap that estimates byte positions proportionally.
+   * Used when the MKV has no Cues but has a known duration.
+   */
+  private inner class ApproximateSeekMap(
+    private val durationUs: Long
+  ) : SeekMap {
+
+    override fun isSeekable(): Boolean = true
+
+    override fun getDurationUs(): Long = durationUs
+
+    override fun getSeekPoints(timeUs: Long): SeekMap.SeekPoints {
+      val length = inputLength
+      if (length == C.LENGTH_UNSET.toLong() || durationUs <= 0) {
+        return SeekMap.SeekPoints(SeekPoint(0, 0))
+      }
+      val clampedTimeUs = timeUs.coerceIn(0, durationUs)
+      val position = (clampedTimeUs.toDouble() / durationUs * length).toLong().coerceIn(0, length)
+      return SeekMap.SeekPoints(SeekPoint(clampedTimeUs, position))
+    }
+  }
+
+  /**
+   * Routes seeks through [TrackAwareSeekMap]'s per-track cue lookups when the delegate reports
+   * unseekable overall. The per-track queries read the live cue data (populated once the Cues
+   * element parsed), so they resolve correctly even when the map was constructed before the
+   * Tracks element — the media3 1.11.0 tracks-after-clusters case (androidx/media #3377).
+   */
+  private inner class TrackCueSeekMap(
+    private val delegate: TrackAwareSeekMap
+  ) : SeekMap {
+
+    override fun isSeekable(): Boolean = delegate.isSeekable || seekableTrackId() != null
+
+    override fun getDurationUs(): Long = delegate.durationUs
+
+    override fun getSeekPoints(timeUs: Long): SeekMap.SeekPoints {
+      if (delegate.isSeekable) return delegate.getSeekPoints(timeUs)
+      val trackId = seekableTrackId() ?: return delegate.getSeekPoints(timeUs)
+      return delegate.getSeekPoints(timeUs, trackId)
+    }
+
+    /** Mirrors media3's primary-track priority: video first, then audio, then anything with cues. */
+    private fun seekableTrackId(): Int? {
+      var audio: Int? = null
+      var fallback: Int? = null
+      for ((id, type) in registeredTracks) {
+        if (!delegate.isSeekable(id)) continue
+        when (type) {
+          C.TRACK_TYPE_VIDEO -> return id
+          C.TRACK_TYPE_AUDIO -> if (audio == null) audio = id
+          else -> if (fallback == null) fallback = id
+        }
+      }
+      return audio ?: fallback
+    }
+  }
+}
@@ -124,6 +124,17 @@ object DoviBridge {
      .also { Log.i(TAG, "Device advertises DV Profile 8 (DvheSt): $it") }
  }

+  /**
+   * Whether this device can natively render single-layer Dolby Vision
+   * Profile 5 (IPT-PQ-c2): it needs both a decoder advertising DvheStn and a
+   * Dolby Vision display pipeline. P5 has no compatible base layer, so a
+   * device that fails either check decodes it as plain HEVC with garbage
+   * colors; callers route those sessions to software decode + gpu-next,
+   * where libplacebo applies the RPU reshaping instead.
+   */
+  fun canPlayDolbyVisionP5(context: Context): Boolean = deviceAdvertisesDvProfile(MediaCodecInfo.CodecProfileLevel.DolbyVisionProfileDvheStn) &&
+    displaySupportsDolbyVision(context)
+
  fun displaySupportsDolbyVision(context: Context): Boolean {
    if (Build.VERSION.SDK_INT < Build.VERSION_CODES.N) {
      Log.i(TAG, "Display Dolby Vision support: false (HDR capabilities require API 24, device API=${Build.VERSION.SDK_INT})")
@@ -145,6 +156,17 @@ object DoviBridge {
    return supported
  }

+  /** Whether the active display advertises any HDR output type. */
+  fun displaySupportsHdr(context: Context): Boolean {
+    if (Build.VERSION.SDK_INT < Build.VERSION_CODES.N) return false
+    val display = getCurrentDisplay(context) ?: return false
+    val hdrTypes = runCatching { getDisplayHdrTypes(display) }.getOrElse { error ->
+      Log.w(TAG, "Display HDR support: failed to query HDR types", error)
+      return false
+    }
+    return hdrTypes.isNotEmpty()
+  }
+
  fun describeDisplayHdrCapabilities(context: Context): String {
    if (Build.VERSION.SDK_INT < Build.VERSION_CODES.N) return "HDR capabilities unavailable (API=${Build.VERSION.SDK_INT})"
    val display = getCurrentDisplay(context) ?: return "HDR capabilities unavailable (no active display)"
@@ -1,26 +0,0 @@
-package com.edde746.plezy.exoplayer
-
-/**
- * RFC 6381 codecs strings for Dolby Vision tracks, mirroring media3's
- * `DolbyVisionConfig.parse` profile table so the FFmpeg demux path publishes
- * the same format media3's own MP4/Matroska extractors would: recognized
- * profiles get `video/dolby-vision` plus this string, unrecognized profiles
- * keep the base codec's format untouched.
- */
-internal object DoviCodecs {
-
-  /**
-   * Codecs string for a DOVIDecoderConfigurationRecord's [profile]/[level],
-   * or null when media3 does not recognize the profile (the track then plays
-   * as its base codec).
-   */
-  fun rfc6381(profile: Int, level: Int): String? {
-    val prefix = when (profile) {
-      4, 5, 7, 8 -> "dvhe"
-      9 -> "dvav"
-      10 -> "dav1"
-      else -> return null
-    }
-    return "%s.%02d.%02d".format(prefix, profile, level)
-  }
-}
@@ -64,7 +64,6 @@ import androidx.media3.extractor.DefaultExtractorsFactory
 import androidx.media3.extractor.mkv.MatroskaExtractor
 import androidx.media3.extractor.mp4.FragmentedMp4Extractor
 import androidx.media3.extractor.mp4.Mp4Extractor
-import androidx.media3.extractor.text.SubtitleTranscodingExtractorOutput
 import androidx.media3.extractor.ts.TsExtractor
 import androidx.media3.ui.AspectRatioFrameLayout
 import androidx.media3.ui.CaptionStyleCompat
@@ -72,7 +71,6 @@ import androidx.media3.ui.SubtitleView
 import com.edde746.plezy.AndroidRuntimeDiagnostics
 import com.edde746.plezy.libass.media.AssHandler
 import com.edde746.plezy.libass.media.parser.AssSubtitleParserFactory
-import com.edde746.plezy.libass.media.text.AssSubtitleExtractorOutput
 import com.edde746.plezy.libass.media.widget.AssSubtitleSurfaceView
 import com.edde746.plezy.shared.AudioFocusManager
 import com.edde746.plezy.shared.DeviceQuirks
@@ -563,18 +561,6 @@ class ExoPlayerCore(private val activity: Activity) :

  @Volatile private var activeDoviMp4Wrapper: DoviExtractorWrapper? = null

-  // The FFmpeg extractor from the current session; getStats reads its
-  // measured audio bitrate for the playing item.
-  @Volatile private var activeFfmpegExtractor: FfmpegExtractor? = null
-
-  // Container-demuxer placement; read per media item when extractors are built.
-  @Volatile private var demuxerPreference: FfmpegDemuxerPolicy.Preference = FfmpegDemuxerPolicy.Preference.FFMPEG
-
-  fun setDemuxerMode(mode: String) {
-    demuxerPreference = FfmpegDemuxerPolicy.fromWire(mode)
-    emitLog("info", "init", "demuxer mode: ${demuxerPreference.wireName}")
-  }
-
  private fun getConfiguredDvMode(): DvConversionMode {
    val override = debugDvModeOverride
    if (override != null) return override
@@ -585,17 +571,12 @@ class ExoPlayerCore(private val activity: Activity) :
  }

  fun initialize(
-    bufferSizeBytes: Int? = null,
-    bufferSizeAuto: Boolean = false,
    tunnelingEnabled: Boolean = true,
    audioPassthroughEnabled: Boolean = false,
    // Read-ahead depth, as the wire name Dart sends. Kept a String because `LoadControlPolicy`
    // is internal and this function is not; unrecognised names resolve to Auto, which is also
    // the default (#1816).
-    bufferTier: String = "auto",
-    // Whether FFmpeg demuxes ahead of media3's extractors. Wire values from
-    // [FfmpegDemuxerPolicy.Preference]; unrecognised resolves to FFmpeg.
-    demuxerMode: String = "ffmpeg"
+    bufferTier: String = "auto"
  ): Boolean {
    if (isInitialized) {
      Log.d(TAG, "Already initialized")
@@ -604,7 +585,6 @@ class ExoPlayerCore(private val activity: Activity) :

    tunnelingUserEnabled = tunnelingEnabled
    this.audioPassthroughEnabled = audioPassthroughEnabled
-    demuxerPreference = FfmpegDemuxerPolicy.fromWire(demuxerMode)
    this.dvMode = getConfiguredDvMode()
    DoviBridge.logSupportSummary(activity)
    Log.i(
@@ -746,20 +726,10 @@ class ExoPlayerCore(private val activity: Activity) :
      }
      httpDataSourceFactory = httpFactory
      dataSourceFactory = DefaultDataSource.Factory(activity, httpFactory)
-      // libavformat owns its own seeking, so the demuxer reads through a
-      // random-access source (FfmpegRandomAccessSource). Recording the DataSpec
-      // media3 opens lets it clone that spec — same URI, cache key, flags and
-      // request headers — instead of re-deriving one.
-      val recordingFactory = RecordingDataSourceFactory(dataSourceFactory!!)
      val extractorsFactory = DefaultExtractorsFactory()
        // High-bitrate Plex DVR MPEG-TS recordings can have sparse PCR packets; the default
        // 600-packet window may leave duration unknown and seeking disabled.
        .setTsExtractorTimestampSearchBytes(TS_TIMESTAMP_SEARCH_PACKETS * TsExtractor.TS_PACKET_SIZE)
-        // Raw subtitle samples from MatroskaExtractor: the external text
-        // pipeline below feeds libass dialogue first and then re-adds cue
-        // transcoding — with the internal wrapper enabled the dialogue bytes
-        // would already be consumed before our wrapper could see them.
-        .setMatroskaExtractorFlags(MatroskaExtractor.FLAG_EMIT_RAW_SUBTITLE_DATA)

      // Inline buildWithAssSupport to retain AssHandler reference for font scale control.
      val handler = AssHandler()
@@ -769,82 +739,42 @@ class ExoPlayerCore(private val activity: Activity) :
      // composition object and blanks palette-only fade updates (#1953).
      val subtitleParserFactory = PgsSubtitleParserFactory(AssSubtitleParserFactory(handler))

-      // Wrap extractors: FFmpeg demuxes the containers media3 is weak at
-      // (primary, before the list) and anything media3 cannot sniff (catch-all,
-      // behind it); give MatroskaExtractor the same libass/transcoding text
-      // pipeline so the media3 fallback (ffmpeg unavailable, media3-only
-      // preference) keeps ASS rendering; wrap MKV/MP4 extractors with the DV
-      // converter when enabled.
-      // Reads this.dvMode and this.demuxerPreference each time (not captured) so
-      // DV7→8.1 retry and demuxer-mode changes can reload without
-      // reinitializing the player.
-      val wrappedExtractorsFactory = object : androidx.media3.extractor.ExtractorsFactory {
-        // media3's progressive path always supplies the item URI. Without one
-        // the demuxer cannot be handed random access, so FFmpeg stays out
-        // rather than failing later on its first index jump.
-        override fun createExtractors(): Array<androidx.media3.extractor.Extractor> {
-          Log.w(TAG, "[init] extractors: no item uri, ffmpeg demuxer unavailable")
-          return buildExtractors(null)
-        }
-
-        override fun createExtractors(
-          uri: Uri,
-          responseHeaders: Map<String, List<String>>
-        ): Array<androidx.media3.extractor.Extractor> = buildExtractors(uri)
-
-        private fun buildExtractors(uri: Uri?): Array<androidx.media3.extractor.Extractor> {
-          val currentDvMode = this@ExoPlayerCore.dvMode
-          val doviEnabled = currentDvMode != DvConversionMode.DISABLED
-          val currentDemuxerPreference = this@ExoPlayerCore.demuxerPreference
-          Log.i(TAG, "[init] extractors: demuxer=${currentDemuxerPreference.wireName}")
-          // media3 invokes the factory once per item and reuses the extractor
-          // instances, so the sniff reads the live preference instead of a
-          // captured one.
-          val liveDemuxerPreference = { this@ExoPlayerCore.demuxerPreference }
-          val ffmpegFirst = listOfNotNull(
-            uri?.let { itemUri ->
-              val io = FfmpegRandomAccessSource(dataSourceFactory!!) { recordingFactory.specFor(itemUri) }
-              FfmpegExtractor.create(
-                liveDemuxerPreference,
-                currentDvMode,
-                subtitleParserFactory,
-                handler,
-                io
-              )?.also { activeFfmpegExtractor = it }
+      // Wrap extractors: replace MatroskaExtractor with the ASS+zlib+LATM
+      // variant, wrap MP4 extractors with the DV converter when enabled.
+      // Reads this.dvMode each time (not captured) so DV7→8.1 retry can
+      // change mode and reload without reinitializing the player.
+      val wrappedExtractorsFactory = androidx.media3.extractor.ExtractorsFactory {
+        val currentDvMode = this.dvMode
+        val doviEnabled = currentDvMode != DvConversionMode.DISABLED
+        extractorsFactory.createExtractors().map { extractor ->
+          when {
+            extractor is MatroskaExtractor -> {
+              val assExtractor = ZlibMatroskaExtractor(subtitleParserFactory, handler)
+              val inner = if (doviEnabled) {
+                DoviExtractorWrapper(assExtractor, currentDvMode) { level, prefix, message ->
+                  emitLog(level, prefix, message)
+                }.also {
+                  activeDoviMkvWrapper = it
+                }
+              } else {
+                assExtractor
+              }
+              // Wrap with approximate seeking for MKV files without Cues
+              CuelessSeekExtractorWrapper(inner)
            }
-          )
-          return (
-            ffmpegFirst + extractorsFactory.createExtractors().map { extractor ->
-              when {
-                extractor is MatroskaExtractor -> {
-                  val withTextPipeline = OutputWrappingExtractor(extractor) { out ->
-                    AssSubtitleExtractorOutput(SubtitleTranscodingExtractorOutput(out, subtitleParserFactory), handler)
-                  }
-                  if (doviEnabled) {
-                    DoviExtractorWrapper(withTextPipeline, currentDvMode) { level, prefix, message ->
-                      emitLog(level, prefix, message)
-                    }.also {
-                      activeDoviMkvWrapper = it
-                    }
-                  } else {
-                    withTextPipeline
-                  }
-                }
-                doviEnabled && (extractor is Mp4Extractor || extractor is FragmentedMp4Extractor) -> {
-                  DoviExtractorWrapper(extractor, currentDvMode) { level, prefix, message ->
-                    emitLog(level, prefix, message)
-                  }.also {
-                    activeDoviMp4Wrapper = it
-                  }
-                }
-                else -> extractor
+            doviEnabled && (extractor is Mp4Extractor || extractor is FragmentedMp4Extractor) -> {
+              DoviExtractorWrapper(extractor, currentDvMode) { level, prefix, message ->
+                emitLog(level, prefix, message)
+              }.also {
+                activeDoviMp4Wrapper = it
              }
            }
-            ).toTypedArray()
-        }
+            else -> extractor
+          }
+        }.toTypedArray()
      }

-      val mediaSourceFactory = DefaultMediaSourceFactory(recordingFactory, wrappedExtractorsFactory)
+      val mediaSourceFactory = DefaultMediaSourceFactory(dataSourceFactory!!, wrappedExtractorsFactory)
        .setSubtitleParserFactory(subtitleParserFactory)
      playbackMediaSourceFactory = mediaSourceFactory

@@ -855,21 +785,15 @@ class ExoPlayerCore(private val activity: Activity) :
          .toTypedArray()
      }

-      // Buffer budget. `bufferSizeBytes` carries the user's explicit Buffer Size choice; on
-      // Auto it still arrives (Dart derives it for mpv's demuxer, which shares the property)
-      // but `bufferSizeAuto` says to ignore it here, because mpv's demuxer and ExoPlayer's
-      // sample allocator have different shapes and different failure modes.
+      // Buffer budget. Derived natively from device memory (LoadControlPolicy);
+      // mpv's demuxer sizes itself the same way in MpvPlayerCore.
      val activityManager = activity.getSystemService(Context.ACTIVITY_SERVICE) as ActivityManager
      val memoryInfo = ActivityManager.MemoryInfo()
      activityManager.getMemoryInfo(memoryInfo)
      val availableMB = (memoryInfo.availMem / (1024 * 1024)).toInt()
      val largeHeapMB = activityManager.largeMemoryClass

-      val targetBufferBytes = if (!bufferSizeAuto && bufferSizeBytes != null && bufferSizeBytes > 0) {
-        bufferSizeBytes
-      } else {
-        LoadControlPolicy.autoTargetBufferBytes(largeHeapMB, availableMB)
-      }
+      val targetBufferBytes = LoadControlPolicy.autoTargetBufferBytes(largeHeapMB, availableMB)

      val resolvedTier = LoadControlPolicy.BufferTier.fromWire(bufferTier)
      val bufferDurations = LoadControlPolicy.bufferDurations(resolvedTier, availableMB)
@@ -892,8 +816,8 @@ class ExoPlayerCore(private val activity: Activity) :
      emitLog(
        "info",
        "init",
-        "Buffer: ${targetBufferBytes / 1024 / 1024}MB limit (${if (bufferSizeAuto) "auto" else "manual"}, " +
-          "heap=${largeHeapMB}MB, available=${availableMB}MB), " +
+        "Buffer: ${targetBufferBytes / 1024 / 1024}MB limit " +
+          "(heap=${largeHeapMB}MB, available=${availableMB}MB), " +
          "buffer=${bufferDurations.minBufferMs / 1000}-${bufferDurations.maxBufferMs / 1000}s " +
          "(${resolvedTier.name.lowercase()}), " +
          "tunneling=$tunnelingUserEnabled, dataSource=$dataSourceLabel"
@@ -3799,7 +3723,6 @@ class ExoPlayerCore(private val activity: Activity) :
    dv7RetryAttempted = override != null
    activeDoviMkvWrapper = null
    activeDoviMp4Wrapper = null
-    activeFfmpegExtractor = null
    val debugMode = override?.name ?: "AUTO"
    emitLog("info", "dv-debug", "P7 DV conversion mode set to $debugMode (active=$dvMode)")
    reloadCurrentMediaForDvMode()
@@ -3836,7 +3759,6 @@ class ExoPlayerCore(private val activity: Activity) :
    lastDvPlaybackInfo = null
    activeDoviMkvWrapper = null
    activeDoviMp4Wrapper = null
-    activeFfmpegExtractor = null
    stopFrameWatchdog()
    cancelDecoderHangCheck()
    cancelResumeStallWatchdog()
@@ -4212,7 +4134,13 @@ class ExoPlayerCore(private val activity: Activity) :
  }

  override fun clearVideoFrameRate() {
-    frameRateManager?.clearVideoFrameRate()
+    // HDR content on an HDR display means the decoder's dataspace put the
+    // display into HDR signaling; defer the rate restore past the HDR exit
+    // (see FrameRateManager.clearVideoFrameRate).
+    val transfer = currentVideoFormat?.colorInfo?.colorTransfer
+    val hdrActive = (transfer == C.COLOR_TRANSFER_ST2084 || transfer == C.COLOR_TRANSFER_HLG) &&
+      DoviBridge.displaySupportsHdr(activity)
+    frameRateManager?.clearVideoFrameRate(hdrActive = hdrActive)
  }

  private fun computeFrameRate(timestamps: LongArray): Float {
@@ -4303,12 +4231,7 @@ class ExoPlayerCore(private val activity: Activity) :
      "audioMimeType" to audioFormat?.sampleMimeType,
      "audioSampleRate" to audioFormat?.sampleRate,
      "audioChannels" to audioFormat?.channelCount,
-      // Container-declared bitrate when present; otherwise the FFmpeg
-      // demuxer's measured value (Matroska rarely carries BPS tags — #2063).
-      "audioBitrate" to (
-        audioFormat?.bitrate?.takeIf { it > 0 }
-          ?: audioFormat?.id?.let { activeFfmpegExtractor?.measuredAudioBitrateBps(it) }
-        ),
+      "audioBitrate" to audioFormat?.bitrate?.takeIf { it > 0 },
      "audioDecoderName" to audioDecoderInitName,
      "audioOutputEncoding" to audioTrackConfig?.encoding,
      "audioOutputChannels" to audioTrackConfig?.channelConfig?.let { Integer.bitCount(it) },
@@ -1,8 +1,6 @@
 package com.edde746.plezy.exoplayer

 import android.app.Activity
-import android.app.ActivityManager
-import android.content.Context
 import android.util.Log
 import com.edde746.plezy.libass.media.AssHandler
 import com.edde746.plezy.mpv.MpvPlayerCore
@@ -40,6 +38,11 @@ class ExoPlayerPlugin :
  private val mainHandler get() = channels.mainHandler
  private fun runOnMain(block: () -> Unit) = channels.runOnMain(block)
  private var playerCore: ExoPlayerCore? = null
+
+  // The Dart instanceId that created the current core. A `dispose` carrying a
+  // different token lost the ownership race to a successor and must not tear
+  // down that successor's session; it is acknowledged without touching it.
+  private var coreInstanceId: Long? = null
  private var mpvCore: MpvPlayerCore? = null // MPV fallback player
  private var usingMpvFallback: Boolean = false
  private var fallbackInProgress: Boolean = false
@@ -108,8 +111,6 @@ class ExoPlayerPlugin :

  private val observedProperties = LinkedHashMap<String, ObservedProperty>()

-  private var configuredBufferSizeBytes: Int? = null
-
  private var sessionGeneration = 0
  private var mediaGeneration = 0
  private var fallbackMediaGeneration: Int? = null
@@ -119,7 +120,8 @@ class ExoPlayerPlugin :
  private var mpvForwardGeneration: Int? = null
  private var mpvSignalGate: MpvSignalGate? = null
  private var mpvCoreNeedsReplacement = false
-  internal var createMpvCore: (Activity) -> MpvPlayerCore = { MpvPlayerCore(it) }
+  internal var createMpvCore: (Activity) -> MpvPlayerCore =
+    { MpvPlayerCore(it, hardwareDecoding = fallbackHardwareDecoding()) }
  internal var initializeMpvCore: (MpvPlayerCore, (Boolean) -> Unit) -> Unit = { core, onInitialized ->
    core.initialize(onInitialized)
  }
@@ -139,6 +141,12 @@ class ExoPlayerPlugin :
  // every codec in audio-spdif with no decode fallback, so the fallback core's value is
  // derived from the audio route at the moment mpv actually starts (#1703).
  private var audioPassthroughRequested = false
+
+  // `dv-conversion-mode` is not an mpv property and never reaches
+  // pendingMpvProperties: Dart routes it through setDvConversionMode (see
+  // PlayerAndroid.setProperty), so the fallback core has to be seeded from the
+  // last configured value or it loses the fork's P7/P5 handling entirely.
+  private var dvConversionMode = "auto"
  private var currentExternalSubtitles: List<Map<String, Any?>>? = null

  // FlutterPlugin
@@ -158,6 +166,7 @@ class ExoPlayerPlugin :
    val exoCore = playerCore
    val fallbackCore = mpvCore
    playerCore = null
+    coreInstanceId = null
    mpvCore = null
    usingMpvFallback = false
    fallbackInProgress = false
@@ -174,6 +183,7 @@ class ExoPlayerPlugin :
    currentExternalSubtitles = null
    pendingMpvProperties.clear()
    audioPassthroughRequested = false
+    dvConversionMode = "auto"
    if (clearActivity) {
      activity = null
      activityBinding = null
@@ -224,7 +234,7 @@ class ExoPlayerPlugin :
  override fun onMethodCall(call: MethodCall, result: MethodChannel.Result) {
    when (call.method) {
      "initialize" -> handleInitialize(call, result)
-      "dispose" -> handleDispose(result)
+      "dispose" -> handleDispose(call, result)
      "open" -> handleOpen(call, result)
      "play" -> handlePlay(result)
      "pause" -> handlePause(result)
@@ -250,15 +260,10 @@ class ExoPlayerPlugin :
      )
      "getStats" -> handleGetStats(result)
      "getPlayerType" -> result.success(if (usingMpvFallback) "mpv" else "exoplayer")
-      "getHeapSize" -> {
-        val am = activity?.getSystemService(Context.ACTIVITY_SERVICE) as? ActivityManager
-        result.success(am?.largeMemoryClass ?: 0)
-      }
      "setSubtitleStyle" -> handleSetSubtitleStyle(call, result)
      "setBoxFitMode" -> handleSetBoxFitMode(call, result)
      "setVideoZoom" -> handleSetVideoZoom(call, result)
      "setDvConversionMode" -> handleSetDvConversionMode(call, result)
-      "setDemuxerMode" -> handleSetDemuxerMode(call, result)
      "setAudioNormalization" -> handleSetAudioNormalization(call, result)
      "setAudioPassthrough" -> handleSetAudioPassthrough(call, result)
      "setAudioDownmix" -> handleSetAudioDownmix(call, result)
@@ -292,21 +297,14 @@ class ExoPlayerPlugin :
      return
    }

-    val bufferSizeBytes = call.argument<Int>("bufferSizeBytes")
-    // Auto sizing is decided natively (LoadControlPolicy). `bufferSizeBytes` still arrives
-    // on Auto because Dart derives one for mpv's demuxer, which shares the property, and
-    // the fallback replay below needs it.
-    val bufferSizeAuto = call.argument<Boolean>("bufferSizeAuto") ?: false
    val tunnelingEnabled = call.argument<Boolean>("tunnelingEnabled") ?: false
-    val dvConversionMode = call.argument<String>("dvConversionMode") ?: "auto"
+    dvConversionMode = call.argument<String>("dvConversionMode") ?: "auto"
    val audioPassthroughEnabled = call.argument<Boolean>("audioPassthroughEnabled") ?: false
    val assVideoLatencyFrames = call.argument<Int>("assVideoLatencyFrames") ?: 0
    val subtitleRenderScale = call.argument<Double>("subtitleRenderScale")?.toFloat() ?: 1.0f
    // ExoPlayer-only: mpv's read-ahead is owned by the mpv.conf editor, so there is no
    // fallback replay for this one. Resolved in the core; unrecognised means Auto (#1816).
    val bufferTier = call.argument<String>("bufferTier") ?: "auto"
-    val demuxerMode = call.argument<String>("demuxerMode") ?: "ffmpeg"
-    configuredBufferSizeBytes = bufferSizeBytes
    // Seed the request here rather than waiting for Dart's separate setAudioPassthrough
    // call, so a fallback raised before that arrives still derives audio-spdif correctly.
    audioPassthroughRequested = audioPassthroughEnabled
@@ -345,13 +343,11 @@ class ExoPlayerPlugin :
          this.debugLoggingEnabled = this@ExoPlayerPlugin.debugLoggingEnabled
        }
        playerCore = core
+        coreInstanceId = call.argument<Number>("instanceId")?.toLong()
        val success = core.initialize(
-          bufferSizeBytes = bufferSizeBytes,
-          bufferSizeAuto = bufferSizeAuto,
          tunnelingEnabled = tunnelingEnabled,
          audioPassthroughEnabled = audioPassthroughEnabled,
-          bufferTier = bufferTier,
-          demuxerMode = demuxerMode
+          bufferTier = bufferTier
        )
        if (!success) {
          if (playerCore === core) playerCore = null
@@ -376,8 +372,15 @@ class ExoPlayerPlugin :
    }
  }

-  private fun handleDispose(result: MethodChannel.Result) {
+  private fun handleDispose(call: MethodCall, result: MethodChannel.Result) {
+    val token = call.argument<Number>("instanceId")?.toLong()
    runOnMain {
+      val owner = coreInstanceId
+      if ((playerCore != null || mpvCore != null) && token != null && owner != null && token != owner) {
+        Log.d(TAG, "Ignoring stale dispose (token=$token, core owner=$owner)")
+        result.success(null)
+        return@runOnMain
+      }
      teardownSession(clearActivity = false)
      Log.d(TAG, "Disposed")
      result.success(null)
@@ -1131,12 +1134,24 @@ class ExoPlayerPlugin :
      return
    }
    if (usingMpvFallback) {
-      result.success(false)
+      // The fallback core owns the property now; dropping the write would
+      // strand it on the mode ExoPlayer started with.
+      val core = mpvCore
+      if (core == null) {
+        result.success(false)
+        return
+      }
+      dvConversionMode = mode
+      core.setProperty("dv-conversion-mode", mode) { outcome ->
+        completeMpvPropertyResult(result, outcome, successValue = true)
+      }
      return
    }
    activity?.runOnUiThread {
      val handled = playerCore?.setDebugDvConversionMode(mode) == true
      if (handled) {
+        // Keep the fallback seed on the value ExoPlayer is actually running.
+        dvConversionMode = mode
        result.success(true)
      } else {
        result.error("INVALID_ARGS", "Invalid DV conversion mode: $mode", null)
@@ -1144,18 +1159,6 @@ class ExoPlayerPlugin :
    } ?: result.error("NO_ACTIVITY", "Activity not available", null)
  }

-  private fun handleSetDemuxerMode(call: MethodCall, result: MethodChannel.Result) {
-    val mode = call.argument<String>("mode")
-    if (mode == null) {
-      result.error("INVALID_ARGS", "Missing 'mode'", null)
-      return
-    }
-    activity?.runOnUiThread {
-      playerCore?.setDemuxerMode(mode)
-      result.success(null)
-    } ?: result.error("NO_ACTIVITY", "Activity not available", null)
-  }
-
  private fun handleSetAudioNormalization(call: MethodCall, result: MethodChannel.Result) {
    val enabled = call.argument<Boolean>("enabled")
    if (enabled == null) {
@@ -1321,6 +1324,16 @@ class ExoPlayerPlugin :
    }
  }

+  /**
+   * Decode intent for a fallback mpv core, read from the `hwdec` value Dart
+   * already wrote for this session. It picks the core's initial vo chain
+   * ([MpvPlayerCore.initialVideoOutput]), so a software-decoding session must
+   * not inherit the hardware default: only gpu-next applies Dolby Vision RPU
+   * reshaping, and a session that asked for software decode is usually the
+   * one that needs it.
+   */
+  private fun fallbackHardwareDecoding(): Boolean = pendingMpvProperties["hwdec"]?.let { it != "no" } ?: true
+
  /**
   * Configure a freshly initialized MPV fallback core: replay the properties
   * and observers Dart registered against the ExoPlayer session, then resume
@@ -1330,17 +1343,13 @@ class ExoPlayerPlugin :
  private fun prepareMpvFallback(core: MpvPlayerCore) {
    val pendingProps = pendingMpvProperties.filterKeys { it != "audio-spdif" }.toList()
    val observedProps = observedProperties.toList()
-    val bufferSize = configuredBufferSizeBytes

-    // vo is owned by MpvPlayerCore's init: the fallback core hardware-decodes
-    // (hwdec below), so it gets the legacy gpu VO — gpu-next under mediacodec
-    // fails every frame on Tegra (#2010) and reshapes no DV anyway.
-    core.setProperty("hwdec", "mediacodec,mediacodec-copy")
+    // hwdec is not seeded here — Dart's write in pendingMpvProperties is the
+    // single source of the fallback core's chain.
    core.setProperty("ao", "audiotrack")
-
-    if (bufferSize != null && bufferSize > 0) {
-      core.setProperty("demuxer-max-bytes", bufferSize.toString())
-    }
+    // Dart routes dv-conversion-mode through setDvConversionMode, so unlike
+    // hwdec it never reaches pendingMpvProperties.
+    core.setProperty("dv-conversion-mode", dvConversionMode)

    for ((propName, propValue) in pendingProps) {
      core.setProperty(propName, propValue) { outcome ->
@@ -1,134 +0,0 @@
-package com.edde746.plezy.exoplayer
-
-import androidx.annotation.OptIn
-import androidx.media3.common.MimeTypes
-import androidx.media3.common.ParserException
-import androidx.media3.common.util.UnstableApi
-import androidx.media3.container.OpusUtil
-
-/**
- * Shapes ffmpeg codec extradata into the per-codec initializationData layout
- * media3's audio decode paths consume. MediaCodecAudioRenderer maps the list
- * entries verbatim to MediaCodec csd-0/1/2 and the bundled FfmpegAudioDecoder
- * rebuilds avcodec extradata from the same entries, so both expect the shapes
- * media3's own extractors emit — not raw ffmpeg extradata:
- *
- * - Opus: [OpusHead, codec delay ns, seek pre-roll ns]. Android's Opus
- *   decoders consume their first three input buffers as exactly this
- *   configuration; given only OpusHead they read the first two real packets
- *   as delay/pre-roll and then silently discard every decoded sample, which
- *   stalled the audio clock at 0 until the MPV fallback fired (#2088).
- * - Vorbis: [identification header, setup header], split out of the
- *   Xiph-laced blob the way MatroskaExtractor's parseVorbisCodecPrivate does.
- * - FLAC: the "fLaC"-marked STREAMINFO stream MediaCodec documents; ffmpeg
- *   surfaces a bare or block-headed STREAMINFO depending on the container.
- *
- * Everything else (AAC ASC, ALAC cookie, passthrough codecs) already matches
- * media3's single-entry shape and passes through. MP3's WAVEFORMATEX blob is
- * dropped on the JNI side before it reaches this shaping.
- */
-@OptIn(UnstableApi::class)
-internal object FfmpegAudioCsd {
-
-  // RFC 7845 section 5.1: the identification header is at least 19 bytes;
-  // OpusUtil reads the pre-skip field at offsets 10-11.
-  private const val OPUS_HEADER_MIN_BYTES = 19
-
-  private val FLAC_STREAM_MARKER = byteArrayOf(0x66, 0x4C, 0x61, 0x43) // "fLaC"
-  private const val FLAC_STREAM_INFO_SIZE = 34
-  private const val FLAC_BLOCK_HEADER_SIZE = 4
-  private const val FLAC_LAST_BLOCK_FLAG = 0x80
-
-  fun initializationData(mime: String, extradata: ByteArray): List<ByteArray> = when (mime) {
-    MimeTypes.AUDIO_OPUS -> opus(extradata)
-    MimeTypes.AUDIO_VORBIS -> vorbis(extradata)
-    MimeTypes.AUDIO_FLAC -> flac(extradata)
-    else -> listOf(extradata)
-  }
-
-  private fun opus(extradata: ByteArray): List<ByteArray> {
-    if (extradata.size < OPUS_HEADER_MIN_BYTES) {
-      throw malformed("Opus extradata is not an identification header: ${extradata.size} bytes")
-    }
-    // [OpusHead, pre-skip ns, 80 ms default seek pre-roll ns] — the same
-    // shape media3's Matroska/Ogg/MP4 extractors publish.
-    return OpusUtil.buildInitializationData(extradata)
-  }
-
-  /**
-   * Splits the Xiph-laced header blob (identification, comment, setup) into
-   * media3's [identification header, setup header] pair, mirroring media3
-   * 1.11.0 MatroskaExtractor.parseVorbisCodecPrivate.
-   */
-  private fun vorbis(extradata: ByteArray): List<ByteArray> {
-    try {
-      if (extradata[0].toInt() != 0x02) throw malformed("Vorbis extradata is not Xiph-laced headers")
-      var offset = 1
-      var idHeaderLength = 0
-      while (extradata[offset].toInt() and 0xFF == 0xFF) {
-        idHeaderLength += 0xFF
-        offset++
-      }
-      idHeaderLength += extradata[offset++].toInt() and 0xFF
-      var commentHeaderLength = 0
-      while (extradata[offset].toInt() and 0xFF == 0xFF) {
-        commentHeaderLength += 0xFF
-        offset++
-      }
-      commentHeaderLength += extradata[offset++].toInt() and 0xFF
-
-      if (extradata[offset].toInt() != 0x01) throw malformed("Vorbis identification header not found")
-      val idHeader = extradata.copyOfRange(offset, offset + idHeaderLength)
-      offset += idHeaderLength
-      if (extradata[offset].toInt() != 0x03) throw malformed("Vorbis comment header not found")
-      offset += commentHeaderLength
-      if (extradata[offset].toInt() != 0x05) throw malformed("Vorbis setup header not found")
-      return listOf(idHeader, extradata.copyOfRange(offset, extradata.size))
-    } catch (e: IndexOutOfBoundsException) {
-      throw malformed("Vorbis extradata truncated")
-    }
-  }
-
-  /**
-   * Normalizes to the "fLaC"-marked metadata stream. MediaCodec's decoder
-   * feeds csd-0 straight into libFLAC, which requires the stream marker;
-   * ffmpeg's canonical FLAC extradata is the bare 34-byte STREAMINFO, and
-   * some demuxers keep the 4-byte metadata block header in front of it.
-   */
-  private fun flac(extradata: ByteArray): List<ByteArray> {
-    if (startsWithFlacMarker(extradata)) return listOf(extradata)
-    if (extradata.size == FLAC_STREAM_INFO_SIZE) {
-      val blockHeader = byteArrayOf(
-        (FLAC_LAST_BLOCK_FLAG or 0).toByte(), // last-metadata-block, type 0 = STREAMINFO
-        0x00,
-        0x00,
-        FLAC_STREAM_INFO_SIZE.toByte()
-      )
-      return listOf(FLAC_STREAM_MARKER + blockHeader + extradata)
-    }
-    val declaredLength = if (extradata.size >= FLAC_BLOCK_HEADER_SIZE) {
-      ((extradata[1].toInt() and 0xFF) shl 16) or
-        ((extradata[2].toInt() and 0xFF) shl 8) or
-        (extradata[3].toInt() and 0xFF)
-    } else {
-      -1
-    }
-    if (extradata[0].toInt() and 0x7F == 0 &&
-      declaredLength == FLAC_STREAM_INFO_SIZE &&
-      extradata.size >= FLAC_BLOCK_HEADER_SIZE + FLAC_STREAM_INFO_SIZE
-    ) {
-      return listOf(FLAC_STREAM_MARKER + extradata)
-    }
-    throw malformed("FLAC extradata is not a STREAMINFO block: ${extradata.size} bytes")
-  }
-
-  private fun startsWithFlacMarker(extradata: ByteArray): Boolean {
-    if (extradata.size < FLAC_STREAM_MARKER.size) return false
-    for (i in FLAC_STREAM_MARKER.indices) {
-      if (extradata[i] != FLAC_STREAM_MARKER[i]) return false
-    }
-    return true
-  }
-
-  private fun malformed(message: String): ParserException = ParserException.createForMalformedContainer(message, null)
-}
@@ -1,139 +0,0 @@
-package com.edde746.plezy.exoplayer
-
-import androidx.annotation.OptIn
-import androidx.media3.common.util.UnstableApi
-
-/**
- * JNI surface for the libavformat demuxer shim (`cpp/media3_ffmpeg_demuxer`).
- *
- * One demuxer exists per process, owned by whichever [FfmpegExtractor] is
- * currently open — Plezy plays at most one progressive source at a time, and
- * every other playback mode (HLS/DASH, music) stays on media3's own sources.
- *
- * The long[] layouts mirror the constants documented in
- * `ffmpeg_demuxer_jni.cc`; keep both sides in sync.
- */
-@OptIn(UnstableApi::class)
-internal object FfmpegDemuxerJni {
-  /** Byte source the AVIO callbacks read through while a native call is in flight. */
-  interface Input {
-    /** Current byte position of the loader's [androidx.media3.extractor.ExtractorInput]. */
-    fun position(): Long
-
-    /**
-     * Reads up to [length] bytes from the loader's input at its current
-     * position. Returns the number of bytes read, `0` at end of input, or `-1`
-     * after storing the failure in [lastError].
-     */
-    fun read(buf: ByteArray, length: Int): Int
-
-    /**
-     * Reads up to [length] bytes at absolute [position], wherever the loader
-     * stands. Same return contract as [read]. This is what lets libavformat
-     * seek its own index without the shim unwinding the in-flight call.
-     */
-    fun readAt(position: Long, buf: ByteArray, length: Int): Int
-
-    /** Total input length in bytes, or `-1` when unknown. */
-    fun length(): Long
-
-    var lastError: String?
-  }
-
-  // readPacket out[] indices.
-  const val OUT_CODE = 0
-  const val OUT_STREAM_INDEX = 1
-  const val OUT_PTS_US = 2
-  const val OUT_FLAGS = 3
-  const val OUT_SIZE = 4
-  const val OUT_POSITION = 5
-  const val OUT_DURATION_US = 6
-  const val OUT_LENGTH = 7
-
-  // Result codes written to out[OUT_CODE]; negative values are raw AVERRORs.
-  const val CODE_PACKET = 0
-  const val CODE_EOF = 1
-  const val CODE_GROW = 2
-  const val ERR_JAVA = -102
-
-  // streamInfo long[] layout.
-  const val INFO_TRACK_TYPE = 0
-  const val INFO_WIDTH = 1
-  const val INFO_HEIGHT = 2
-  const val INFO_PAR_NUM = 3
-  const val INFO_PAR_DEN = 4
-  const val INFO_FPS_NUM = 5
-  const val INFO_FPS_DEN = 6
-  const val INFO_SAMPLE_RATE = 7
-  const val INFO_CHANNELS = 8
-  const val INFO_PCM_ENCODING = 9
-  const val INFO_ROTATION = 10
-  const val INFO_SELECTION_FLAGS = 11
-  const val INFO_ROLE_FLAGS = 12
-  const val INFO_BITRATE = 13
-  const val INFO_DOVI_PROFILE = 14
-  const val INFO_DOVI_LEVEL = 15
-  const val INFO_LATM = 16
-  const val INFO_LENGTH = 17
-
-  val available: Boolean = try {
-    System.loadLibrary("ffmpegJNI")
-    true
-  } catch (_: UnsatisfiedLinkError) {
-    false
-  }
-
-  /** Probes container bytes; returns the ffmpeg short name ("avi", "asf", …) or null. */
-  external fun nativeProbeFormat(header: ByteArray): String?
-
-  /**
-   * Opens the demuxer against [input]. Returns 0 on success or a negative
-   * AVERROR ([ERR_JAVA] when the input itself failed). The stream count is read
-   * separately via [nativeStreamCount]; it must not ride the same namespace as
-   * result codes.
-   */
-  external fun nativeOpen(input: Input): Int
-
-  external fun nativeClose()
-
-  external fun nativeStreamCount(): Int
-
-  /** Total duration in microseconds, or -1 when unknown. */
-  external fun nativeDurationUs(): Long
-
-  /** Fills [numbers]/[strings] for [index]; false when the stream is unusable. */
-  external fun nativeStreamInfo(index: Int, numbers: LongArray, strings: Array<String?>): Boolean
-
-  /** Codec initialization data (extradata), or null. */
-  external fun nativeStreamExtradata(index: Int): ByteArray?
-
-  /** Number of attachment streams (embedded fonts and friends) with payloads. */
-  external fun nativeAttachmentCount(): Int
-
-  /**
-   * Fills [strings] with [filename, mimetype] for attachment [ordinal] and
-   * returns the payload size in bytes, or -1 when out of range. Lets Kotlin
-   * enforce font budgets before copying any bytes across the boundary.
-   */
-  external fun nativeAttachmentInfo(ordinal: Int, strings: Array<String?>): Long
-
-  /** Attachment payload bytes, or null. */
-  external fun nativeAttachmentData(ordinal: Int): ByteArray?
-
-  /**
-   * Reads one packet into [buffer], filling [out]. See the shim header
-   * comment for the result contract.
-   */
-  external fun nativeReadPacket(buffer: ByteArray, out: LongArray): Int
-
-  /** Byte position libavformat will read next, or -1 when not open. */
-  external fun nativeLogicalPosition(): Long
-
-  /**
-   * Seeks to [timeUs] (media3 timeline microseconds, i.e. start-time
-   * normalized). The demuxer resolves the byte position itself through its own
-   * index. Returns 0 on success, or a negative AVERROR when the container has
-   * no usable index and libavformat refused the seek.
-   */
-  external fun nativeSeek(timeUs: Long): Int
-}
@@ -1,27 +0,0 @@
-package com.edde746.plezy.exoplayer
-
-/**
- * Decides whether the FFmpeg demuxer sits ahead of media3's own extractors.
- *
- * FFmpeg demuxes every progressive container by default. media3's bundled
- * extractors were weak exactly where this app kept accumulating container
- * patches — AVI (XviD packed-bitstream timestamps, missing VOL csd — issue
- * #2052), ASF/WMV (no extractor at all), MPEG-PS/VOB (no extractor), and
- * Matroska (zlib-compressed subtitles, LOAS/LATM audio as A_MS/ACM, cueless
- * seeking, font attachments) — and libavformat handles all of it natively.
- * media3's extractors stay behind FFmpeg in the list, so a container FFmpeg
- * fails to sniff still reaches media3's parsers. [Preference.MEDIA3_ONLY] is
- * the user-facing escape hatch in case a file misbehaves on the FFmpeg path.
- */
-internal object FfmpegDemuxerPolicy {
-  enum class Preference(val wireName: String) {
-    FFMPEG("ffmpeg"),
-    MEDIA3_ONLY("media3")
-  }
-
-  /** Unknown wire values (including the retired "auto") resolve to FFmpeg. */
-  fun fromWire(value: String?): Preference = Preference.entries.firstOrNull { it.wireName == value } ?: Preference.FFMPEG
-
-  /** Whether the FFmpeg extractor placed before media3's list demuxes at all. */
-  fun enabled(preference: Preference): Boolean = preference == Preference.FFMPEG
-}
@@ -1,574 +0,0 @@
-package com.edde746.plezy.exoplayer
-
-import android.util.Log
-import androidx.annotation.OptIn
-import androidx.media3.common.C
-import androidx.media3.common.Format
-import androidx.media3.common.MimeTypes
-import androidx.media3.common.ParserException
-import androidx.media3.common.util.ParsableByteArray
-import androidx.media3.common.util.UnstableApi
-import androidx.media3.extractor.Extractor
-import androidx.media3.extractor.ExtractorInput
-import androidx.media3.extractor.ExtractorOutput
-import androidx.media3.extractor.PositionHolder
-import androidx.media3.extractor.SeekMap
-import androidx.media3.extractor.SeekPoint
-import androidx.media3.extractor.TrackOutput
-import androidx.media3.extractor.text.SubtitleParser
-import androidx.media3.extractor.text.SubtitleTranscodingExtractorOutput
-import com.edde746.plezy.libass.media.AssFonts
-import com.edde746.plezy.libass.media.AssHandler
-import com.edde746.plezy.libass.media.text.AssSubtitleExtractorOutput
-import java.io.IOException
-
-/**
- * Demuxes progressive containers with libavformat and feeds the packets to
- * media3's renderers, so FFmpeg's container coverage replaces media3's on the
- * paths where it is weak (AVI/XviD timestamps and VOL csd — #2052 — ASF/WMV,
- * MPEG-PS) and where the app accumulated Matroska patches (zlib-compressed
- * subtitles, LOAS/LATM audio, cueless seeking) without giving up any of the
- * renderer-side work (passthrough carriers, DV sanitizing, libass rendering
- * with embedded fonts, subtitle latency calibration).
- *
- * Text tracks are emitted in the exact sample shape media3's
- * MatroskaExtractor writes (see [FfmpegSubtitleSamples]); the output chain
- * composed in [init] then feeds libass dialogue and transcodes cues the same
- * way the media3 Matroska path does.
- *
- * Seeking: libavformat resolves seeks itself, reading its own index through
- * [FfmpegRandomAccessSource]. media3's byte hints are ignored, nothing is ever
- * unwound, and the loader is merely nudged to follow along so that sample
- * delivery keeps streaming on its connection (see [alignLoader]).
- *
- * The instance sits before media3's extractors and sniffs everything FFmpeg
- * can probe while [FfmpegDemuxerPolicy] enables it; media3's list behind it
- * is the fallback for anything FFmpeg cannot open.
- */
-@OptIn(UnstableApi::class)
-internal class FfmpegExtractor private constructor(
-  private val preferenceSupplier: () -> FfmpegDemuxerPolicy.Preference,
-  private val dvMode: DvConversionMode,
-  private val subtitleParserFactory: SubtitleParser.Factory,
-  private val assHandler: AssHandler,
-  private val io: FfmpegRandomAccessSource
-) : Extractor {
-
-  companion object {
-    private const val TAG = "FfmpegExtractor"
-    private const val SNIFF_BYTES = 64 * 1024
-    private const val INITIAL_PACKET_BUFFER_BYTES = 2 * 1024 * 1024
-
-    /** Null when the native library is unavailable. */
-    fun create(
-      preferenceSupplier: () -> FfmpegDemuxerPolicy.Preference,
-      dvMode: DvConversionMode,
-      subtitleParserFactory: SubtitleParser.Factory,
-      assHandler: AssHandler,
-      io: FfmpegRandomAccessSource
-    ): FfmpegExtractor? = if (FfmpegDemuxerJni.available) {
-      FfmpegExtractor(preferenceSupplier, dvMode, subtitleParserFactory, assHandler, io)
-    } else {
-      null
-    }
-  }
-
-  private lateinit var output: ExtractorOutput
-  private var currentInput: ExtractorInput? = null
-  private val inputProxy = object : FfmpegDemuxerJni.Input {
-    override fun position(): Long = currentInput?.position ?: 0L
-
-    override fun read(buf: ByteArray, length: Int): Int {
-      val input = currentInput ?: return 0
-      lastError = null
-      return try {
-        val read = input.read(buf, 0, length)
-        if (read == C.RESULT_END_OF_INPUT) 0 else read
-      } catch (e: IOException) {
-        lastError = e.message ?: "demuxer input failed"
-        -1
-      }
-    }
-
-    override fun readAt(position: Long, buf: ByteArray, length: Int): Int {
-      lastError = null
-      return try {
-        io.readAt(position, buf, length)
-      } catch (e: IOException) {
-        lastError = e.message ?: "demuxer random access read failed"
-        -1
-      }
-    }
-
-    override fun length(): Long {
-      val fromLoader = currentInput?.length ?: C.LENGTH_UNSET.toLong()
-      if (fromLoader != C.LENGTH_UNSET.toLong()) return fromLoader
-      // Length-less loader open (progressive live stream): fall back to
-      // whatever a random-access open already resolved.
-      val resolved = io.length()
-      return if (resolved == C.LENGTH_UNSET.toLong()) -1L else resolved
-    }
-
-    override var lastError: String? = null
-  }
-
-  private var opened = false
-  private var doviOutputWrapper: DoviExtractorOutputWrapper? = null
-  private var durationUs = C.TIME_UNSET
-  private var trackOutputs: Array<TrackOutput?> = emptyArray()
-  private var packetBytes = ByteArray(INITIAL_PACKET_BUFFER_BYTES)
-  private val packetParsable = ParsableByteArray()
-  private val packetOut = LongArray(FfmpegDemuxerJni.OUT_LENGTH)
-  private val prefixParsable = ParsableByteArray()
-
-  // Per-stream text handling picked in prepareTracks; parallel to trackOutputs.
-  private var subtitleKinds: Array<SubtitleKind> = emptyArray()
-  private val latmOutputs = ArrayList<LatmTrackOutput>()
-
-  // Per-audio-stream measured bitrate, parallel to trackOutputs. Written by
-  // the loader thread, read by ExoPlayerCore.getStats on another thread.
-  @Volatile private var bitrateMeters: Array<StreamBitrateMeter?> = emptyArray()
-
-  // Set by seek(), applied by the next read(): media3 calls both on the loader
-  // thread, but only read() is allowed to throw IOException and the demuxer's
-  // seek reads its index.
-  private var pendingSeekUs = C.TIME_UNSET
-  private var deliveredAnyPacket = false
-
-  private val sniffScratch = ByteArray(SNIFF_BYTES)
-
-  override fun sniff(input: ExtractorInput): Boolean {
-    // media3 materializes the extractor array once per player session, so the
-    // policy must be read live at sniff time — a preference captured at
-    // construction would freeze for the session.
-    if (!FfmpegDemuxerPolicy.enabled(preferenceSupplier())) return false
-    val probed = probe(input) ?: return false
-    Log.i(TAG, "sniff accepted $probed")
-    return true
-  }
-
-  private fun probe(input: ExtractorInput): String? {
-    // create() only builds instances when the native library loaded.
-    input.resetPeekPosition()
-    return try {
-      val filled =
-        input.peekFully(
-          sniffScratch,
-          /* offset= */
-          0,
-          sniffScratch.size,
-          /* allowEndOfInput= */
-          true
-        )
-      if (!filled) return null
-      FfmpegDemuxerJni.nativeProbeFormat(sniffScratch)?.lowercase()
-    } catch (_: Throwable) {
-      // A sniffer must never take playback down: media3 escalates anything
-      // that is not an IOException into a fatal loader error.
-      null
-    } finally {
-      input.resetPeekPosition()
-    }
-  }
-
-  override fun init(output: ExtractorOutput) {
-    // media3 reuses extractor instances across sources; drop the previous
-    // item's demuxer and byte source so this open starts clean.
-    releaseDemuxer()
-    // Same composition as the MP4/MKV paths: DoviConvertingTrackOutput
-    // inspects each video track's codecs string and passes non-DV through.
-    val doviWrapped = if (dvMode != DvConversionMode.DISABLED) {
-      // The wrapper forwards emitLog into each converting track output; the
-      // playback-info hook stays wired to the MKV/MP4 wrappers, so nothing to
-      // capture here.
-      DoviExtractorOutputWrapper(
-        output,
-        dvMode,
-        emitLog = { level, prefix, message ->
-          Log.println(if (level == "error") Log.ERROR else Log.INFO, TAG, "$prefix $message")
-        },
-        onVideoTrackWrapped = { _ -> }
-      ).also { doviOutputWrapper = it }
-    } else {
-      doviOutputWrapper = null
-      output
-    }
-    // Text pipeline, extractor-outward: raw media3-shape samples first hit
-    // AssTrackOutput (libass dialogue feed), then the transcoding wrapper
-    // parses them into cue samples. media3 does NOT wrap third-party
-    // extractors' outputs; without this wrapper no text track would ever
-    // reach the renderer as cues.
-    this.output = AssSubtitleExtractorOutput(
-      SubtitleTranscodingExtractorOutput(doviWrapped, subtitleParserFactory),
-      assHandler
-    )
-  }
-
-  override fun read(input: ExtractorInput, seekPosition: PositionHolder): Int {
-    currentInput = input
-    try {
-      if (!opened) openStreams()
-      applyPendingSeek()
-      alignLoader(input)?.let { position ->
-        seekPosition.position = position
-        return Extractor.RESULT_SEEK
-      }
-      // Aligned: the loader serves the samples, so nothing needs a second
-      // handle open until the demuxer jumps again.
-      if (io.isOpen) io.close()
-      return readPacket()
-    } catch (e: Throwable) {
-      Log.w(TAG, "read threw at input=${input.position}", e)
-      throw e
-    } finally {
-      currentInput = null
-    }
-  }
-
-  /**
-   * Byte position the loader should move to, or null when it already stands
-   * where libavformat reads.
-   *
-   * Reads outside the loader's window are served by [io] regardless, so this
-   * is an optimization, never a correctness requirement: it keeps sample
-   * delivery on media3's own connection, which is what drives its byte
-   * accounting, back-pressure (ProgressiveMediaPeriod watches the input
-   * position) and load-error policy. Nothing here needs a retry budget.
-   */
-  private fun alignLoader(input: ExtractorInput): Long? {
-    val demuxerPosition = FfmpegDemuxerJni.nativeLogicalPosition()
-    if (demuxerPosition < 0 || demuxerPosition == input.position) return null
-    val length = input.length
-    // Opening a range at or past the end is a failed request, not an
-    // alignment; let the read report end of input instead.
-    if (length != C.LENGTH_UNSET.toLong() && demuxerPosition >= length) return null
-    return demuxerPosition
-  }
-
-  /**
-   * Records the target; [read] performs it. media3's byte position is its
-   * SeekMap guess and is deliberately ignored — libavformat picks the byte
-   * position from its own index.
-   */
-  override fun seek(position: Long, timeUs: Long) {
-    Log.i(TAG, "extractor seek timeUs=$timeUs opened=$opened")
-    doviOutputWrapper?.resetTracks()
-    // Buffered LOAS bytes belong to the pre-seek stream; the StreamMuxConfig
-    // survives so audio resumes without waiting for the next config.
-    for (latm in latmOutputs) latm.reset()
-    pendingSeekUs = timeUs
-  }
-
-  private fun applyPendingSeek() {
-    val target = pendingSeekUs
-    if (target == C.TIME_UNSET) return
-    pendingSeekUs = C.TIME_UNSET
-    // media3 issues seek(0) before the first read of every item; a demuxer
-    // that has not delivered a packet yet is already at the start, and
-    // seeking would throw away find_stream_info's buffered packets and
-    // re-read the header region.
-    if (target == 0L && !deliveredAnyPacket) return
-    val code = FfmpegDemuxerJni.nativeSeek(target)
-    if (code == FfmpegDemuxerJni.ERR_JAVA) {
-      throw IOException(inputProxy.lastError ?: "demuxer input failed")
-    }
-    if (code != 0) {
-      // No usable index in this container: libavformat keeps delivering from
-      // where it stands and the renderers decode-discard toward the target,
-      // which is what media3's own extractors do for a cueless file.
-      Log.w(TAG, "demuxer refused seek to ${target}us: $code")
-    }
-  }
-
-  override fun release() {
-    releaseDemuxer()
-  }
-
-  private fun releaseDemuxer() {
-    if (opened) {
-      opened = false
-      FfmpegDemuxerJni.nativeClose()
-    }
-    io.close()
-    pendingSeekUs = C.TIME_UNSET
-    deliveredAnyPacket = false
-    // media3's extractors may demux a later item while this instance keeps
-    // the previous one's stream layout; a stale measurement must not leak
-    // into stats.
-    bitrateMeters = emptyArray()
-  }
-
-  /**
-   * Measured average bitrate (bps) of the audio stream whose index matches
-   * [formatId] (this extractor sets `Format.id` to the stream index), or null
-   * when this instance is not demuxing that stream. Fallback for containers
-   * that declare no per-track bitrate (#2063).
-   */
-  fun measuredAudioBitrateBps(formatId: String?): Int? {
-    val index = formatId?.toIntOrNull() ?: return null
-    return bitrateMeters.getOrNull(index)?.bitrateBps()
-  }
-
-  private fun openStreams() {
-    when (val code = FfmpegDemuxerJni.nativeOpen(inputProxy)) {
-      0 -> {
-        prepareTracks()
-        opened = true
-        Log.i(TAG, "ffmpeg demuxer ready: ${trackOutputs.count { it != null }} tracks")
-      }
-      FfmpegDemuxerJni.ERR_JAVA -> throw IOException(inputProxy.lastError ?: "demuxer input failed")
-      else -> throw malformed("ffmpeg demuxer open failed: $code")
-    }
-  }
-
-  private enum class SubtitleKind { NONE, SSA, SUBRIP, VTT }
-
-  private fun prepareTracks() {
-    val count = FfmpegDemuxerJni.nativeStreamCount()
-    durationUs = FfmpegDemuxerJni.nativeDurationUs().takeIf { it >= 0 } ?: C.TIME_UNSET
-    trackOutputs = arrayOfNulls(count)
-    subtitleKinds = Array(count) { SubtitleKind.NONE }
-    bitrateMeters = arrayOfNulls(count)
-    latmOutputs.clear()
-    // Fonts go in before any text track exists so AssHandler's store flushes
-    // them into libass when the first ASS track is created.
-    deliverFontAttachments()
-    val numbers = LongArray(FfmpegDemuxerJni.INFO_LENGTH)
-    val strings = arrayOfNulls<String>(3)
-    var primaryVideo = -1
-    var primaryAudio = -1
-
-    for (index in 0 until count) {
-      if (!FfmpegDemuxerJni.nativeStreamInfo(index, numbers, strings)) continue
-      val mime = strings[0] ?: continue
-      val trackType = when (numbers[FfmpegDemuxerJni.INFO_TRACK_TYPE]) {
-        0L -> C.TRACK_TYPE_VIDEO
-        1L -> C.TRACK_TYPE_AUDIO
-        2L -> C.TRACK_TYPE_TEXT
-        else -> continue
-      }
-
-      val builder = Format.Builder()
-        .setId(index.toString())
-        .setSampleMimeType(mime)
-        .setLanguage(strings[1])
-        .setLabel(strings[2])
-        .setSelectionFlags(numbers[FfmpegDemuxerJni.INFO_SELECTION_FLAGS].toInt())
-        .setRoleFlags(numbers[FfmpegDemuxerJni.INFO_ROLE_FLAGS].toInt())
-        .setAverageBitrate(numbers[FfmpegDemuxerJni.INFO_BITRATE].toInt())
-
-      val extradata = FfmpegDemuxerJni.nativeStreamExtradata(index)
-      if (extradata != null) {
-        // Audio csd is codec-specific in media3 (see FfmpegAudioCsd); raw
-        // extradata is only correct for video (already Annex-B via the JNI
-        // bitstream filter) and text tracks.
-        builder.setInitializationData(
-          if (trackType == C.TRACK_TYPE_AUDIO) {
-            FfmpegAudioCsd.initializationData(mime, extradata)
-          } else {
-            listOf(extradata)
-          }
-        )
-      }
-
-      when (trackType) {
-        C.TRACK_TYPE_VIDEO -> {
-          // A Dolby Vision config record rides the stream as side data.
-          // Mirror media3's MP4/Matroska extractors: recognized profiles
-          // publish video/dolby-vision with the RFC 6381 codecs string, so
-          // DoviConvertingTrackOutput's P7 conversion, the P8 passthrough
-          // path, and the renderer's HEVC fallback engage exactly as they do
-          // on the media3 demux path.
-          val doviProfile = numbers[FfmpegDemuxerJni.INFO_DOVI_PROFILE].toInt()
-          if (doviProfile >= 0) {
-            val doviLevel = numbers[FfmpegDemuxerJni.INFO_DOVI_LEVEL].toInt().coerceAtLeast(0)
-            val doviCodecs = DoviCodecs.rfc6381(doviProfile, doviLevel)
-            if (doviCodecs != null) {
-              builder.setCodecs(doviCodecs)
-              builder.setSampleMimeType(MimeTypes.VIDEO_DOLBY_VISION)
-            }
-            Log.i(TAG, "video track $index: doviProfile=$doviProfile doviLevel=$doviLevel codecs=$doviCodecs baseMime=$mime")
-          }
-          val width = numbers[FfmpegDemuxerJni.INFO_WIDTH].toInt()
-          val height = numbers[FfmpegDemuxerJni.INFO_HEIGHT].toInt()
-          builder
-            .setWidth(width)
-            .setHeight(height)
-            .setRotationDegrees(numbers[FfmpegDemuxerJni.INFO_ROTATION].toInt())
-          val parNum = numbers[FfmpegDemuxerJni.INFO_PAR_NUM]
-          val parDen = numbers[FfmpegDemuxerJni.INFO_PAR_DEN]
-          if (parNum > 0 && parDen > 0 && parNum != parDen) {
-            builder.setPixelWidthHeightRatio(parNum.toFloat() / parDen.toFloat())
-          }
-          val fpsNum = numbers[FfmpegDemuxerJni.INFO_FPS_NUM]
-          val fpsDen = numbers[FfmpegDemuxerJni.INFO_FPS_DEN]
-          if (fpsNum > 0 && fpsDen > 0) {
-            builder.setFrameRate(fpsNum.toFloat() / fpsDen.toFloat())
-          }
-          if (primaryVideo < 0) {
-            primaryVideo = index
-            // libass needs the storage size before the first render; the
-            // Matroska path published it from the Tracks element the same way.
-            if (width > 0 && height > 0) assHandler.setVideoSize(width, height)
-          }
-        }
-        C.TRACK_TYPE_AUDIO -> {
-          builder
-            .setSampleRate(numbers[FfmpegDemuxerJni.INFO_SAMPLE_RATE].toInt())
-            .setChannelCount(numbers[FfmpegDemuxerJni.INFO_CHANNELS].toInt())
-          val pcmEncoding = numbers[FfmpegDemuxerJni.INFO_PCM_ENCODING].toInt()
-          if (pcmEncoding >= 0) builder.setPcmEncoding(pcmEncoding)
-          if (primaryAudio < 0) primaryAudio = index
-          bitrateMeters[index] = StreamBitrateMeter()
-        }
-        C.TRACK_TYPE_TEXT -> {
-          val kind = when (mime) {
-            MimeTypes.TEXT_SSA -> SubtitleKind.SSA
-            MimeTypes.APPLICATION_SUBRIP -> SubtitleKind.SUBRIP
-            MimeTypes.TEXT_VTT -> SubtitleKind.VTT
-            else -> SubtitleKind.NONE
-          }
-          subtitleKinds[index] = kind
-          if (kind == SubtitleKind.SSA) {
-            // Embedded ASS reaches libass as per-sample dialogue, never as a
-            // whole file: AssSubtitleParserFactory keys embedded handling off
-            // the Matroska container mime, and AssHeaderParser reads the
-            // header from initializationData[1] — the exact layout media3's
-            // MatroskaExtractor publishes.
-            builder.setContainerMimeType(MimeTypes.VIDEO_MATROSKA)
-            if (extradata != null) {
-              builder.setInitializationData(
-                listOf(FfmpegSubtitleSamples.SSA_DIALOGUE_FORMAT, extradata)
-              )
-            }
-          }
-        }
-      }
-
-      val rawOutput = output.track(index, trackType)
-      val trackOutput = if (trackType == C.TRACK_TYPE_AUDIO && numbers[FfmpegDemuxerJni.INFO_LATM] == 1L) {
-        // LOAS/LATM-framed AAC: unwrap to raw access units; the wrapper
-        // swallows this placeholder Format and emits the real one parsed from
-        // the StreamMuxConfig.
-        LatmTrackOutput(rawOutput, index).also { latmOutputs.add(it) }
-      } else {
-        rawOutput
-      }
-      trackOutput.format(builder.build())
-      trackOutputs[index] = trackOutput
-    }
-
-    output.endTracks()
-    output.seekMap(SeekMapImpl())
-  }
-
-  /** Hands embedded font attachments to libass, under the shared budgets. */
-  private fun deliverFontAttachments() {
-    val count = FfmpegDemuxerJni.nativeAttachmentCount()
-    if (count <= 0) return
-    var acceptedBytes = 0L
-    val meta = arrayOfNulls<String>(2)
-    for (ordinal in 0 until count) {
-      val size = FfmpegDemuxerJni.nativeAttachmentInfo(ordinal, meta)
-      if (size <= 0) continue
-      val name = meta[0] ?: continue
-      val mime = meta[1] ?: continue
-      if (mime !in AssFonts.fontMimeTypes) continue
-      val rejectionReason = AssFonts.rejectionReason(size, acceptedBytes)
-      if (rejectionReason != null) {
-        Log.w(TAG, "Skipping embedded font: $rejectionReason (bytes=$size, accepted=$acceptedBytes)")
-        continue
-      }
-      val data = FfmpegDemuxerJni.nativeAttachmentData(ordinal) ?: continue
-      acceptedBytes += size
-      assHandler.addFont(name, data)
-    }
-  }
-
-  private fun readPacket(): Int {
-    while (true) {
-      val code = FfmpegDemuxerJni.nativeReadPacket(packetBytes, packetOut)
-      when (code) {
-        FfmpegDemuxerJni.CODE_PACKET -> {
-          val streamIndex = packetOut[FfmpegDemuxerJni.OUT_STREAM_INDEX].toInt()
-          val size = packetOut[FfmpegDemuxerJni.OUT_SIZE].toInt()
-          val trackOutput = trackOutputs.getOrNull(streamIndex) ?: continue
-          val ptsUs = packetOut[FfmpegDemuxerJni.OUT_PTS_US]
-          val isKeyframe = packetOut[FfmpegDemuxerJni.OUT_FLAGS] and 1L != 0L
-          val subtitleKind = subtitleKinds.getOrNull(streamIndex) ?: SubtitleKind.NONE
-          if (subtitleKind != SubtitleKind.NONE) {
-            // Text samples carry their duration inside the sample text, in
-            // media3's MatroskaExtractor shape; a sample without a duration
-            // cannot be displayed (same skip media3 performs).
-            val sampleDurationUs = packetOut[FfmpegDemuxerJni.OUT_DURATION_US]
-            if (sampleDurationUs <= 0) {
-              Log.w(TAG, "Skipping subtitle sample with no duration (stream=$streamIndex)")
-              continue
-            }
-            val prefix = when (subtitleKind) {
-              SubtitleKind.SSA -> FfmpegSubtitleSamples.ssaPrefix(sampleDurationUs)
-              SubtitleKind.SUBRIP -> FfmpegSubtitleSamples.subripPrefix(sampleDurationUs)
-              else -> FfmpegSubtitleSamples.vttPrefix(sampleDurationUs)
-            }
-            prefixParsable.reset(prefix, prefix.size)
-            trackOutput.sampleData(prefixParsable, prefix.size)
-            packetParsable.reset(packetBytes, size)
-            trackOutput.sampleData(packetParsable, size)
-            trackOutput.sampleMetadata(
-              ptsUs,
-              C.BUFFER_FLAG_KEY_FRAME,
-              prefix.size + size,
-              /* offset= */
-              0,
-              /* cryptoData= */
-              null
-            )
-            return Extractor.RESULT_CONTINUE
-          }
-          packetParsable.reset(packetBytes, size)
-          trackOutput.sampleData(packetParsable, size)
-          // Native drops packets without any timestamp, so ptsUs is always real.
-          trackOutput.sampleMetadata(
-            ptsUs,
-            if (isKeyframe) C.BUFFER_FLAG_KEY_FRAME else 0,
-            size,
-            /* offset= */
-            0,
-            /* cryptoData= */
-            null
-          )
-          deliveredAnyPacket = true
-          bitrateMeters.getOrNull(streamIndex)?.onPacket(ptsUs, size)
-          return Extractor.RESULT_CONTINUE
-        }
-        FfmpegDemuxerJni.CODE_EOF -> return Extractor.RESULT_END_OF_INPUT
-        FfmpegDemuxerJni.CODE_GROW -> {
-          val required = packetOut[FfmpegDemuxerJni.OUT_SIZE].toInt()
-          packetBytes = ByteArray(required + 64 * 1024)
-        }
-        FfmpegDemuxerJni.ERR_JAVA ->
-          throw IOException(inputProxy.lastError ?: "demuxer input failed")
-        else -> throw malformed("ffmpeg demuxer read failed: $code")
-      }
-    }
-  }
-
-  private fun malformed(message: String): ParserException = ParserException.createForMalformedContainer(message, null)
-
-  private inner class SeekMapImpl : SeekMap {
-    override fun isSeekable(): Boolean = this@FfmpegExtractor.durationUs != C.TIME_UNSET
-
-    /**
-     * The demuxer owns seek resolution: it reads its own index and lands on
-     * the right keyframe by itself, so there is no second index here to keep
-     * consistent. The byte position exists only to satisfy the interface —
-     * [alignLoader] moves the loader to wherever libavformat actually ended
-     * up, on the read that follows the seek.
-     */
-    override fun getSeekPoints(timeUs: Long): SeekMap.SeekPoints = SeekMap.SeekPoints(SeekPoint(timeUs, 0))
-
-    // Qualified on purpose: bare `durationUs` binds to the inherited Java
-    // getter as a synthetic property (this.getDurationUs()) and recurses.
-    override fun getDurationUs(): Long = this@FfmpegExtractor.durationUs
-  }
-}
@@ -1,167 +0,0 @@
-package com.edde746.plezy.exoplayer
-
-import android.net.Uri
-import androidx.annotation.OptIn
-import androidx.media3.common.C
-import androidx.media3.common.util.UnstableApi
-import androidx.media3.datasource.DataSource
-import androidx.media3.datasource.DataSpec
-import androidx.media3.datasource.TransferListener
-import java.io.IOException
-
-/**
- * Random-access byte source for the libavformat demuxer.
- *
- * libavformat demuxers own their own IO: they jump to the end of the file for an
- * index (matroska Cues, MP4 moov, AVI idx1), back to the header, and binary
- * search (MPEG-PS) whenever they please. media3's [
- * androidx.media3.extractor.ExtractorInput] is forward-only — an extractor may
- * only ask the loader to re-open elsewhere and be invoked again — so serving
- * libavformat from the loader alone means every backward jump has to unwind the
- * in-flight libavformat call and replay it, which is what the demuxer shim used
- * to do (and what made a matroska Cues read unrecoverable, #2096).
- *
- * This class removes the mismatch instead of working around it: reads outside
- * the loader's window open a second [DataSource] from the same factory media3
- * uses, positioned exactly where libavformat asked. Cronet, download caches,
- * SAF and the item's own request headers therefore still apply, because the
- * [DataSpec] is cloned from the one media3 opened for this item.
- *
- * Sequential sample delivery deliberately does not come through here: it stays
- * on the loader's connection so media3 keeps its byte accounting, back-pressure
- * and load-error policy (see [FfmpegExtractor]). This source is opened for
- * header/index bursts and closed again as soon as the loader is back in step.
- */
-@OptIn(UnstableApi::class)
-internal class FfmpegRandomAccessSource(
-  private val factory: DataSource.Factory,
-  private val specProvider: () -> DataSpec?
-) {
-  private var source: DataSource? = null
-
-  /** Absolute position the open handle returns next; [C.INDEX_UNSET] when closed. */
-  private var handlePosition = C.INDEX_UNSET.toLong()
-
-  private var resolvedLength = C.LENGTH_UNSET.toLong()
-
-  private var opens = 0
-
-  /** Handles opened so far; the tests assert an index seek does not walk the file. */
-  val openCount: Int
-    get() = synchronized(this) { opens }
-
-  val isOpen: Boolean
-    get() = synchronized(this) { source != null }
-
-  /**
-   * Reads up to [length] bytes at absolute [position]. Returns the number of
-   * bytes read, or 0 at end of input. Reopens the underlying source whenever
-   * the requested position is not where the current handle stands, which is the
-   * only way to move backwards on a byte stream.
-   */
-  fun readAt(position: Long, buffer: ByteArray, length: Int): Int = synchronized(this) {
-    if (length <= 0) return 0
-    val handle = handleAt(position)
-    val read = handle.read(buffer, 0, length)
-    if (read == C.RESULT_END_OF_INPUT) return 0
-    handlePosition = position + read
-    read
-  }
-
-  /**
-   * Total resource length once some open has resolved it, else
-   * [C.LENGTH_UNSET]. Never performs IO of its own: the extractor prefers the
-   * length media3 already resolved for the loader.
-   */
-  fun length(): Long = synchronized(this) { resolvedLength }
-
-  fun close() = synchronized(this) {
-    closeHandle()
-    handlePosition = C.INDEX_UNSET.toLong()
-  }
-
-  private fun handleAt(position: Long): DataSource {
-    val existing = source
-    if (existing != null && handlePosition == position) return existing
-    closeHandle()
-    val spec = specProvider() ?: throw IOException("ffmpeg demuxer has no data spec for random access")
-    // Clone rather than subrange: the recorded spec carries the loader's own
-    // position, and subrange() is relative to it.
-    val positioned = spec.buildUpon()
-      .setPosition(position)
-      .setLength(C.LENGTH_UNSET.toLong())
-      .build()
-    val created = factory.createDataSource()
-    val remaining = try {
-      created.open(positioned)
-    } catch (e: Throwable) {
-      closeQuietly(created)
-      throw e
-    }
-    source = created
-    handlePosition = position
-    opens++
-    if (remaining != C.LENGTH_UNSET.toLong()) resolvedLength = position + remaining
-    return created
-  }
-
-  private fun closeHandle() {
-    source?.let { closeQuietly(it) }
-    source = null
-  }
-
-  private fun closeQuietly(dataSource: DataSource) {
-    try {
-      dataSource.close()
-    } catch (_: IOException) {
-      // Closing a handle we are abandoning cannot fail the read that replaces it.
-    }
-  }
-}
-
-/**
- * [DataSource.Factory] that remembers the [DataSpec] media3 opened for each
- * item, so [FfmpegRandomAccessSource] can clone it — same URI, cache key, flags
- * and request headers — instead of re-deriving one and silently losing, say, a
- * download's cache key.
- *
- * Keyed by URI because ExoPlayer prepares the next item's period while the
- * current one is still loading; the demuxer must never read the next item's
- * bytes.
- */
-@OptIn(UnstableApi::class)
-internal class RecordingDataSourceFactory(private val delegate: DataSource.Factory) : DataSource.Factory {
-
-  private val specs = object : LinkedHashMap<Uri, DataSpec>(8, 0.75f, false) {
-    override fun removeEldestEntry(eldest: MutableMap.MutableEntry<Uri, DataSpec>): Boolean = size > MAX_TRACKED_ITEMS
-  }
-
-  fun specFor(uri: Uri): DataSpec? = synchronized(specs) { specs[uri] }
-
-  override fun createDataSource(): DataSource = RecordingDataSource(delegate.createDataSource())
-
-  private fun record(dataSpec: DataSpec) {
-    synchronized(specs) { specs[dataSpec.uri] = dataSpec }
-  }
-
-  private inner class RecordingDataSource(private val inner: DataSource) : DataSource {
-    override fun open(dataSpec: DataSpec): Long {
-      record(dataSpec)
-      return inner.open(dataSpec)
-    }
-
-    override fun read(buffer: ByteArray, offset: Int, length: Int): Int = inner.read(buffer, offset, length)
-
-    override fun addTransferListener(transferListener: TransferListener) = inner.addTransferListener(transferListener)
-
-    override fun getUri(): Uri? = inner.uri
-
-    override fun getResponseHeaders(): Map<String, List<String>> = inner.responseHeaders
-
-    override fun close() = inner.close()
-  }
-
-  private companion object {
-    const val MAX_TRACKED_ITEMS = 4
-  }
-}
@@ -1,46 +0,0 @@
-package com.edde746.plezy.exoplayer
-
-import java.util.Locale
-
-/**
- * Builds text subtitle samples in the exact shape media3's MatroskaExtractor
- * writes, so the same downstream consumers work behind the FFmpeg demuxer:
- * the bundled SsaParser/SubripParser/WebvttParser (via
- * SubtitleTranscodingExtractorOutput) and AssTrackOutput's dialogue feed.
- *
- * MatroskaExtractor prefixes each raw payload with a synthetic header whose
- * *second* timecode carries the sample duration (BlockDuration), while the
- * first stays zero; parsers reconstruct absolute times as sampleTimeUs +
- * parsedStart. FFmpeg hands us the same raw payloads (an ASS packet is the
- * MKV block: "ReadOrder,Layer,Style,...,Text"; SubRip/WebVTT packets are the
- * bare cue text), so only the prefix needs synthesizing.
- */
-internal object FfmpegSubtitleSamples {
-
-  val SSA_DIALOGUE_FORMAT: ByteArray =
-    "Format: Start, End, ReadOrder, Layer, Style, Name, MarginL, MarginR, MarginV, Effect, Text"
-      .toByteArray(Charsets.UTF_8)
-
-  /** `Dialogue: 0:00:00:00,H:MM:SS:CC,` — centiseconds, ':' separator (media3's SSA shape). */
-  fun ssaPrefix(durationUs: Long): ByteArray = "Dialogue: 0:00:00:00,${timecode(durationUs, "%01d:%02d:%02d:%02d", 10_000)},"
-    .toByteArray(Charsets.UTF_8)
-
-  /** `1\n00:00:00,000 --> HH:MM:SS,mmm\n` — a complete SRT cue header. */
-  fun subripPrefix(durationUs: Long): ByteArray = "1\n00:00:00,000 --> ${timecode(durationUs, "%02d:%02d:%02d,%03d", 1_000)}\n"
-    .toByteArray(Charsets.UTF_8)
-
-  /** `WEBVTT\n\n00:00:00.000 --> HH:MM:SS.mmm\n` — a one-cue WebVTT document header. */
-  fun vttPrefix(durationUs: Long): ByteArray = "WEBVTT\n\n00:00:00.000 --> ${timecode(durationUs, "%02d:%02d:%02d.%03d", 1_000)}\n"
-    .toByteArray(Charsets.UTF_8)
-
-  private fun timecode(timeUs: Long, format: String, lastValueDivisor: Long): String {
-    val hours = timeUs / 3_600_000_000L
-    var remainder = timeUs - hours * 3_600_000_000L
-    val minutes = remainder / 60_000_000L
-    remainder -= minutes * 60_000_000L
-    val seconds = remainder / 1_000_000L
-    remainder -= seconds * 1_000_000L
-    val lastValue = remainder / lastValueDivisor
-    return String.format(Locale.US, format, hours, minutes, seconds, lastValue)
-  }
-}
@@ -0,0 +1,65 @@
+package com.edde746.plezy.exoplayer
+
+import androidx.media3.extractor.ExtractorOutput
+import androidx.media3.extractor.SeekMap
+import androidx.media3.extractor.TrackOutput
+import androidx.media3.extractor.mkv.MatroskaExtractor
+
+/** MKV CodecID for Microsoft ACM compatibility mode. */
+private const val CODEC_ID_ACM = "A_MS/ACM"
+
+/**
+ * MatroskaExtractor.init is final and extractorOutput private; subclasses swap
+ * in wrapping outputs via reflection once the Segment element starts (shared
+ * with ZlibMatroskaExtractor).
+ */
+internal val matroskaExtractorOutputField by lazy {
+  MatroskaExtractor::class.java.getDeclaredField("extractorOutput").apply {
+    isAccessible = true
+  }
+}
+
+/** WAVEFORMATEX format tag for LOAS/LATM-wrapped AAC (WAVE_FORMAT_MPEG_LOAS). */
+private const val WAVE_FORMAT_MPEG_LOAS = 0x1602
+
+/**
+ * Returns whether a track is LOAS/LATM AAC muxed as A_MS/ACM — ffmpeg's
+ * fallback mapping for aac_latm, which Matroska has no native codec ID for.
+ * The WAVEFORMATEX wFormatTag is the first 2 bytes (LE) of CodecPrivate.
+ */
+fun isLoasAcmTrack(codecId: String?, codecPrivate: ByteArray?): Boolean = codecId == CODEC_ID_ACM &&
+  codecPrivate != null &&
+  codecPrivate.size >= 2 &&
+  ((codecPrivate[0].toInt() and 0xFF) or ((codecPrivate[1].toInt() and 0xFF) shl 8)) == WAVE_FORMAT_MPEG_LOAS
+
+/**
+ * ExtractorOutput wrapper that wraps marked tracks with [LatmTrackOutput].
+ * Call [markNextTrackLatm] before the parent extractor creates the track
+ * (i.e. before super.endMasterElement(ID_TRACK_ENTRY)).
+ */
+class LatmExtractorOutputWrapper(
+  private val delegate: ExtractorOutput
+) : ExtractorOutput {
+
+  private var nextTrackIsLatm = false
+  private val latmOutputs = mutableListOf<LatmTrackOutput>()
+
+  fun markNextTrackLatm() {
+    nextTrackIsLatm = true
+  }
+
+  /** Resets LATM parser state after an extractor seek. */
+  fun resetTracks() {
+    latmOutputs.forEach { it.reset() }
+  }
+
+  override fun track(id: Int, type: Int): TrackOutput {
+    val original = delegate.track(id, type)
+    if (!nextTrackIsLatm) return original
+    nextTrackIsLatm = false
+    return LatmTrackOutput(original, id).also { latmOutputs.add(it) }
+  }
+
+  override fun endTracks() = delegate.endTracks()
+  override fun seekMap(seekMap: SeekMap) = delegate.seekMap(seekMap)
+}
@@ -1,31 +0,0 @@
-package com.edde746.plezy.exoplayer
-
-import androidx.media3.common.util.UnstableApi
-import androidx.media3.extractor.Extractor
-import androidx.media3.extractor.ExtractorInput
-import androidx.media3.extractor.ExtractorOutput
-import androidx.media3.extractor.PositionHolder
-
-/**
- * Delegates everything to [delegate] but hands it a wrapped [ExtractorOutput].
- * Used to compose the text pipeline (libass dialogue feed + subtitle cue
- * transcoding) around media3's raw-subtitle MatroskaExtractor without
- * subclassing or reflection.
- */
-@UnstableApi
-internal class OutputWrappingExtractor(
-  private val delegate: Extractor,
-  private val wrap: (ExtractorOutput) -> ExtractorOutput
-) : Extractor {
-  override fun sniff(input: ExtractorInput): Boolean = delegate.sniff(input)
-
-  override fun init(output: ExtractorOutput) = delegate.init(wrap(output))
-
-  override fun read(input: ExtractorInput, seekPosition: PositionHolder): Int = delegate.read(input, seekPosition)
-
-  override fun seek(position: Long, timeUs: Long) = delegate.seek(position, timeUs)
-
-  override fun release() = delegate.release()
-
-  override fun getUnderlyingImplementation(): Extractor = delegate.underlyingImplementation
-}
@@ -1,65 +0,0 @@
-package com.edde746.plezy.exoplayer
-
-/**
- * Rolling average bitrate of one demuxed stream, measured from packet sizes
- * over their presentation-time span — the same source of truth mpv uses for
- * its `audio-bitrate` property. It exists because containers frequently
- * declare no per-track bitrate (Matroska without BPS statistics tags), which
- * left the performance overlay with nothing to show (#2063).
- *
- * Fed from the loader thread ([onPacket]) and read from the stats path
- * ([bitrateBps]); both are synchronized. The measurement follows the demux
- * position, which runs ahead of the playhead by the buffered duration —
- * acceptable for a diagnostics overlay.
- */
-internal class StreamBitrateMeter(private val windowUs: Long = DEFAULT_WINDOW_US) {
-
-  private val ptsUsQueue = ArrayDeque<Long>()
-  private val sizeQueue = ArrayDeque<Int>()
-  private var windowBytes = 0L
-
-  @Synchronized
-  fun onPacket(ptsUs: Long, sizeBytes: Int) {
-    if (sizeBytes <= 0) return
-    // A backwards pts jump is a seek; packets on either side of it do not
-    // form a contiguous span, so the window restarts.
-    val last = ptsUsQueue.lastOrNull()
-    if (last != null && ptsUs < last) reset()
-    ptsUsQueue.addLast(ptsUs)
-    sizeQueue.addLast(sizeBytes)
-    windowBytes += sizeBytes
-    while (ptsUsQueue.size > 1 && ptsUsQueue.last() - ptsUsQueue.first() > windowUs) {
-      ptsUsQueue.removeFirst()
-      windowBytes -= sizeQueue.removeFirst()
-    }
-  }
-
-  /**
-   * Average bitrate in bits per second over the current window, or null until
-   * enough packets span a measurable interval.
-   */
-  @Synchronized
-  fun bitrateBps(): Int? {
-    if (ptsUsQueue.size < MIN_PACKETS) return null
-    val spanUs = ptsUsQueue.last() - ptsUsQueue.first()
-    if (spanUs <= 0) return null
-    // The pts span covers the durations of every packet except the last one,
-    // whose bytes are therefore excluded — a constant-rate stream measures
-    // exactly its rate.
-    val bytes = windowBytes - sizeQueue.last()
-    if (bytes <= 0) return null
-    return (bytes * 8_000_000L / spanUs).toInt()
-  }
-
-  @Synchronized
-  fun reset() {
-    ptsUsQueue.clear()
-    sizeQueue.clear()
-    windowBytes = 0L
-  }
-
-  companion object {
-    private const val DEFAULT_WINDOW_US = 10_000_000L
-    private const val MIN_PACKETS = 16
-  }
-}
@@ -0,0 +1,91 @@
+package com.edde746.plezy.exoplayer
+
+import androidx.media3.common.ParserException
+import androidx.media3.extractor.TrackOutput
+import java.util.zip.DataFormatException
+import java.util.zip.Inflater
+
+/**
+ * TrackOutput wrapper that inflates zlib-compressed sample data (MKV ContentCompAlgo 0).
+ * Each MKV block is independently zlib-compressed; this wrapper decompresses per-sample
+ * between sampleData() and sampleMetadata() calls.
+ *
+ * All buffers are reused across samples to minimize GC pressure on the hot path.
+ */
+class ZlibInflatingTrackOutput(
+  delegate: TrackOutput
+) : BufferedTransformingTrackOutput(
+  delegate,
+  INITIAL_BUFFER_SIZE,
+  INFLATE_CHUNK,
+  MAX_COMPRESSED_SAMPLE_SIZE
+) {
+
+  companion object {
+    private const val INITIAL_BUFFER_SIZE = 256 * 1024
+    private const val INFLATE_CHUNK = 64 * 1024
+    private const val MAX_COMPRESSED_SAMPLE_SIZE = 16 * 1024 * 1024
+    private const val MAX_INFLATED_SAMPLE_SIZE = 16 * 1024 * 1024
+    private const val MAX_COMPRESSION_RATIO = 1024L
+    private const val MIN_RATIO_ALLOWANCE = 1024L * 1024
+  }
+
+  var active = false
+
+  private val inflater = Inflater()
+  private var inflateBuf = ByteArray(INITIAL_BUFFER_SIZE)
+  private val overflowProbe = ByteArray(1)
+
+  override val transformEnabled: Boolean
+    get() = active
+
+  override val transformedBuffer: ByteArray
+    get() = inflateBuf
+
+  override fun transformSample(inputLength: Int, flags: Int): Int {
+    inflater.reset()
+    inflater.setInput(inputBuffer, 0, inputLength)
+    var written = 0
+    val ratioBound = maxOf(MIN_RATIO_ALLOWANCE, inputLength.toLong() * MAX_COMPRESSION_RATIO)
+
+    try {
+      while (true) {
+        if (written == inflateBuf.size) {
+          if (inflateBuf.size < MAX_INFLATED_SAMPLE_SIZE) {
+            val nextSize = minOf(MAX_INFLATED_SAMPLE_SIZE, inflateBuf.size * 2)
+            inflateBuf = inflateBuf.copyOf(nextSize)
+          } else {
+            val overflow = inflater.inflate(overflowProbe, 0, 1)
+            if (overflow > 0) {
+              throw malformed("Inflated sample exceeds the maximum size")
+            }
+            if (inflater.finished()) return written
+            throw stalledInflate()
+          }
+        }
+
+        val count = inflater.inflate(inflateBuf, written, inflateBuf.size - written)
+        written += count
+        if (written.toLong() > ratioBound) {
+          throw malformed("Inflated sample exceeds the maximum compression ratio")
+        }
+        if (inflater.finished()) return written
+        if (count == 0) throw stalledInflate()
+      }
+    } catch (_: DataFormatException) {
+      // Preserve playback for corrupt subtitle blocks; the raw sample remains bounded
+      // by MAX_COMPRESSED_SAMPLE_SIZE and matches the pre-hardening fallback.
+      if (inflateBuf.size < inputLength) inflateBuf = inflateBuf.copyOf(inputLength)
+      inputBuffer.copyInto(inflateBuf, endIndex = inputLength)
+      return inputLength
+    }
+  }
+
+  private fun stalledInflate(): ParserException = when {
+    inflater.needsDictionary() -> malformed("Zlib-compressed sample requires a dictionary")
+    inflater.needsInput() -> malformed("Truncated zlib-compressed sample")
+    else -> malformed("Zlib decompressor made no progress")
+  }
+
+  private fun malformed(message: String, cause: Throwable? = null): ParserException = ParserException.createForMalformedContainer(message, cause)
+}
@@ -0,0 +1,315 @@
+package com.edde746.plezy.exoplayer
+
+import android.util.Log
+import androidx.media3.common.C
+import androidx.media3.common.DataReader
+import androidx.media3.extractor.DefaultExtractorInput
+import androidx.media3.extractor.ExtractorInput
+import androidx.media3.extractor.ExtractorOutput
+import androidx.media3.extractor.SeekMap
+import androidx.media3.extractor.TrackOutput
+import androidx.media3.extractor.text.SubtitleParser
+import com.edde746.plezy.libass.media.AssHandler
+import com.edde746.plezy.libass.media.extractor.AssMatroskaExtractor
+import java.io.EOFException
+import java.util.zip.DataFormatException
+import java.util.zip.Inflater
+
+/**
+ * Extends AssMatroskaExtractor to add support for MKV quirks media3 rejects:
+ *
+ * ContentCompAlgo 0 (zlib) — media3 only supports ContentCompAlgo 3 (header
+ * stripping). This subclass intercepts the compression algorithm during track
+ * header parsing:
+ * - Tells the parent it's header stripping (algo 3) to avoid the ParserException
+ * - Skips ContentCompSettings for zlib tracks (not applicable)
+ * - For text subtitle tracks, inflates the block payload *before* the parent
+ *   parses it (see below). For every other zlib track, wraps TrackOutputs with
+ *   ZlibInflatingTrackOutput to decompress per-sample data.
+ *
+ * Text subtitle tracks (SRT/ASS/SSA/VTT) cannot be inflated at the TrackOutput
+ * level: MatroskaExtractor rewrites their samples in-place before any TrackOutput
+ * runs — it prepends a plaintext timecode prefix ("Dialogue: 0:00:00:00,…,") to
+ * the still-compressed payload and truncates the sample at the first NUL byte,
+ * which deflate streams routinely contain (#2023). AssTrackOutput additionally
+ * feeds that same internal buffer straight to libass. So for zlib text tracks the
+ * frame payload is inflated at the block level, before the parent's sample
+ * assembly, and the TrackOutput wrapper is left inactive.
+ *
+ * LOAS/LATM AAC as A_MS/ACM — media3 sets audio/x-unknown for non-PCM ACM
+ * tracks (silent playback). Detected tracks are wrapped with LatmTrackOutput,
+ * which unwraps LOAS frames to raw AAC for direct-playing Matroska files.
+ */
+class ZlibMatroskaExtractor(
+  subtitleParserFactory: SubtitleParser.Factory,
+  assHandler: AssHandler
+) : AssMatroskaExtractor(subtitleParserFactory, assHandler) {
+
+  companion object {
+    private const val TAG = "ZlibMkvExtractor"
+
+    // Matroska EBML element IDs
+    private const val ID_SEGMENT = 0x18538067
+    private const val ID_TRACK_ENTRY = 0xAE
+    private const val ID_CONTENT_COMPRESSION_ALGORITHM = 0x4254
+    private const val ID_CONTENT_COMPRESSION_SETTINGS = 0x4255
+    private const val ID_CONTENT_COMPRESSION = 0x5034
+    private const val ID_SIMPLE_BLOCK = 0xA3
+    private const val ID_BLOCK = 0xA1
+
+    /**
+     * Codec IDs whose samples MatroskaExtractor rewrites in-place (timecode prefix
+     * plus NUL truncation) before any TrackOutput runs — the authority is the
+     * prefix list in MatroskaExtractor.writeSampleData.
+     */
+    private val TEXT_SUBTITLE_CODEC_IDS = setOf("S_TEXT/UTF8", "S_TEXT/ASS", "S_TEXT/SSA", "S_TEXT/WEBVTT")
+
+    /** Subtitle blocks are tiny; anything above this passes through untouched. */
+    private const val MAX_TEXT_BLOCK_BYTES = 16 * 1024 * 1024
+  }
+
+  private var zlibOutput: ZlibExtractorOutputWrapper? = null
+  private var latmOutput: LatmExtractorOutputWrapper? = null
+  private var currentTrackUsesZlib = false
+
+  /** Track numbers whose blocks are inflated before the parent parses them. */
+  private val zlibTextTrackNumbers = mutableSetOf<Int>()
+  private val blockInflater = Inflater()
+  private var blockBuf = ByteArray(0)
+  private val peekBuf = ByteArray(8)
+
+  override fun startMasterElement(id: Int, contentPosition: Long, contentSize: Long) {
+    super.startMasterElement(id, contentPosition, contentSize)
+
+    // ContentCompAlgo DEFAULTS to 0 (zlib), so mkvmerge omits the element for
+    // zlib tracks entirely — the mere presence of ContentCompression means zlib
+    // until an explicit ContentCompAlgo says otherwise. media3 ignores an empty
+    // ContentCompression and would silently emit compressed samples.
+    if (id == ID_CONTENT_COMPRESSION) {
+      currentTrackUsesZlib = true
+      Log.i(TAG, "Track has ContentCompression, assuming ContentCompAlgo 0 (zlib) until told otherwise")
+    }
+
+    // After super installs AssSubtitleExtractorOutput, wrap it with our zlib +
+    // LATM layers (zlib outermost so inflation runs before LATM parsing).
+    if (id == ID_SEGMENT && zlibOutput == null) {
+      val currentOutput = matroskaExtractorOutputField.get(this) as ExtractorOutput
+      val latmWrapper = LatmExtractorOutputWrapper(currentOutput)
+      latmOutput = latmWrapper
+      val wrapper = ZlibExtractorOutputWrapper(latmWrapper)
+      zlibOutput = wrapper
+      matroskaExtractorOutputField.set(this, wrapper)
+      Log.d(TAG, "Installed zlib+LATM ExtractorOutput wrapper")
+    }
+  }
+
+  override fun integerElement(id: Int, value: Long) {
+    if (id == ID_CONTENT_COMPRESSION_ALGORITHM) {
+      if (value == 0L) {
+        currentTrackUsesZlib = true
+        Log.i(TAG, "Track uses explicit ContentCompAlgo 0 (zlib), will inflate samples")
+        // Tell parent it's header stripping (algo 3) to avoid ParserException
+        super.integerElement(id, 3)
+        return
+      }
+      // Explicit non-zlib algorithm: header stripping (3) is handled by the
+      // parent; anything else makes the parent throw, matching stock behavior.
+      currentTrackUsesZlib = false
+    }
+    super.integerElement(id, value)
+  }
+
+  override fun binaryElement(id: Int, contentSize: Int, input: ExtractorInput) {
+    if (id == ID_CONTENT_COMPRESSION_SETTINGS && currentTrackUsesZlib) {
+      // Skip ContentCompSettings for zlib tracks — parent would store these as
+      // sampleStrippedBytes and prepend them to every sample, corrupting output.
+      input.skipFully(contentSize)
+      return
+    }
+    if ((id == ID_SIMPLE_BLOCK || id == ID_BLOCK) &&
+      zlibTextTrackNumbers.isNotEmpty() &&
+      contentSize in MIN_BLOCK_BYTES..MAX_TEXT_BLOCK_BYTES &&
+      peekBlockTrackNumber(input) in zlibTextTrackNumbers
+    ) {
+      inflateTextBlock(id, contentSize, input)
+      return
+    }
+    super.binaryElement(id, contentSize, input)
+  }
+
+  override fun endMasterElement(id: Int) {
+    var zlibTextTrackNumber: Int? = null
+    if (id == ID_TRACK_ENTRY) {
+      // Must inspect before super — the track output is created inside super's
+      // endMasterElement, and the current track is cleared afterwards.
+      val track = getCurrentTrack(id)
+      if (isLoasAcmTrack(track.codecId, track.codecPrivate)) {
+        Log.i(TAG, "Track ${track.number} is LOAS/LATM AAC, unwrapping to raw AAC")
+        latmOutput?.markNextTrackLatm()
+      }
+      if (currentTrackUsesZlib && track.codecId in TEXT_SUBTITLE_CODEC_IDS) {
+        zlibTextTrackNumber = track.number
+      }
+    }
+
+    val wasZlib = currentTrackUsesZlib
+    super.endMasterElement(id)
+
+    if (id == ID_TRACK_ENTRY && wasZlib) {
+      currentTrackUsesZlib = false
+      if (zlibTextTrackNumber != null) {
+        // Text subtitle samples are rewritten inside the parent before any
+        // TrackOutput runs, so the TrackOutput wrapper stays inactive and the
+        // block payload is inflated in binaryElement instead.
+        zlibTextTrackNumbers.add(zlibTextTrackNumber)
+        Log.i(TAG, "Track $zlibTextTrackNumber is a zlib text subtitle track, inflating at block level")
+      } else {
+        zlibOutput?.activateLast()
+        Log.i(TAG, "Activated zlib inflation for track")
+      }
+    }
+  }
+
+  override fun seek(position: Long, timeUs: Long) {
+    latmOutput?.resetTracks()
+    zlibOutput?.resetTracks()
+    super.seek(position, timeUs)
+  }
+
+  /**
+   * Peeks the EBML varint at the block start — the block's track number — without
+   * consuming input. Returns null for malformed varints or truncated input; the
+   * parent then produces the canonical failure for the untouched stream.
+   */
+  private fun peekBlockTrackNumber(input: ExtractorInput): Int? {
+    try {
+      input.peekFully(peekBuf, 0, 1)
+      val first = peekBuf[0].toInt() and 0xFF
+      if (first == 0) return null
+      val length = Integer.numberOfLeadingZeros(first) - 23
+      var value = (first and (0xFF ushr length)).toLong()
+      if (length > 1) {
+        input.peekFully(peekBuf, 1, length - 1)
+        for (i in 1 until length) {
+          value = (value shl 8) or (peekBuf[i].toLong() and 0xFF)
+        }
+      }
+      return if (value <= Int.MAX_VALUE) value.toInt() else null
+    } catch (_: EOFException) {
+      return null
+    } finally {
+      input.resetPeekPosition()
+    }
+  }
+
+  /**
+   * Buffers one text-subtitle block, inflates its frame payload, and hands the
+   * parent a block whose payload is plaintext. A block that cannot be rewritten
+   * (laced, corrupt, or over-bound) passes through byte-identical.
+   */
+  private fun inflateTextBlock(id: Int, contentSize: Int, input: ExtractorInput) {
+    val basePosition = input.position
+    if (blockBuf.size < contentSize) blockBuf = ByteArray(maxOf(contentSize, blockBuf.size * 2))
+    input.readFully(blockBuf, 0, contentSize)
+    val rewritten = rewriteZlibTextBlock(blockBuf, contentSize, blockInflater)
+    if (rewritten == null) {
+      Log.w(TAG, "Passing zlib text block through uninflated (laced, corrupt, or over-bound)")
+      super.binaryElement(id, contentSize, bufferedInput(blockBuf, contentSize, basePosition))
+    } else {
+      super.binaryElement(id, rewritten.size, bufferedInput(rewritten, rewritten.size, basePosition))
+    }
+  }
+
+  private fun bufferedInput(data: ByteArray, limit: Int, position: Long): ExtractorInput = DefaultExtractorInput(ByteRangeDataReader(data, limit), position, position + limit)
+
+  private class ByteRangeDataReader(private val data: ByteArray, private val limit: Int) : DataReader {
+    private var position = 0
+
+    override fun read(buffer: ByteArray, offset: Int, length: Int): Int {
+      if (position == limit) return C.RESULT_END_OF_INPUT
+      val count = minOf(length, limit - position)
+      System.arraycopy(data, position, buffer, offset, count)
+      position += count
+      return count
+    }
+  }
+
+  /**
+   * ExtractorOutput wrapper that wraps all TrackOutputs with ZlibInflatingTrackOutput.
+   * Tracks are created inactive; activateLast() enables inflation for the most recently
+   * created track (called when we know a track uses zlib compression).
+   */
+  private class ZlibExtractorOutputWrapper(
+    private val delegate: ExtractorOutput
+  ) : ExtractorOutput {
+
+    private var lastCreatedWrapper: ZlibInflatingTrackOutput? = null
+    private val trackOutputs = mutableListOf<ZlibInflatingTrackOutput>()
+
+    override fun track(id: Int, type: Int): TrackOutput {
+      val original = delegate.track(id, type)
+      return ZlibInflatingTrackOutput(original).also {
+        trackOutputs.add(it)
+        lastCreatedWrapper = it
+      }
+    }
+
+    fun activateLast() {
+      lastCreatedWrapper?.active = true
+    }
+
+    fun resetTracks() {
+      trackOutputs.forEach { it.resetBufferedData() }
+    }
+
+    override fun endTracks() = delegate.endTracks()
+    override fun seekMap(seekMap: SeekMap) = delegate.seekMap(seekMap)
+  }
+}
+
+/** Smallest well-formed unlaced block: 1-byte varint + 2-byte timecode + flags + 1 payload byte. */
+internal const val MIN_BLOCK_BYTES = 5
+
+/**
+ * Rewrites one unlaced Matroska block whose frame payload is zlib-compressed:
+ * returns the unchanged block header followed by the inflated payload, or null
+ * when the block must pass through unchanged — lacing (never produced for text
+ * subtitle tracks), a truncated or corrupt deflate stream, or an inflated size
+ * beyond the bounds shared with [ZlibInflatingTrackOutput]'s hardening.
+ */
+internal fun rewriteZlibTextBlock(data: ByteArray, limit: Int, inflater: Inflater): ByteArray? {
+  if (limit < MIN_BLOCK_BYTES) return null
+  val first = data[0].toInt() and 0xFF
+  if (first == 0) return null // track-number varint longer than 8 bytes
+  val varintLength = Integer.numberOfLeadingZeros(first) - 23
+  val headerLength = varintLength + 3 // varint + 2-byte timecode + flags
+  if (limit <= headerLength) return null
+  if (data[headerLength - 1].toInt() and 0x06 != 0) return null // laced
+
+  val payloadLength = limit - headerLength
+  val ratioBound = maxOf(1024L * 1024, payloadLength.toLong() * 1024)
+  val maxInflatedBytes = 16 * 1024 * 1024
+  inflater.reset()
+  inflater.setInput(data, headerLength, payloadLength)
+  var buf = ByteArray(maxOf(4096, payloadLength * 4))
+  var written = 0
+  try {
+    while (true) {
+      if (written == buf.size) {
+        if (buf.size >= maxInflatedBytes) return null
+        buf = buf.copyOf(minOf(maxInflatedBytes, buf.size * 2))
+      }
+      val count = inflater.inflate(buf, written, buf.size - written)
+      written += count
+      if (written > ratioBound) return null
+      if (inflater.finished()) break
+      if (count == 0) return null // truncated stream or preset-dictionary request
+    }
+  } catch (_: DataFormatException) {
+    return null
+  }
+  return ByteArray(headerLength + written).also {
+    System.arraycopy(data, 0, it, 0, headerLength)
+    System.arraycopy(buf, 0, it, headerLength, written)
+  }
+}
@@ -0,0 +1,28 @@
+package com.edde746.plezy.mpv
+
+/**
+ * Demuxer cache budget derived from the device heap class.
+ *
+ * mpv has no device-memory awareness: `demuxer-max-bytes` defaults to a fixed
+ * 150 MiB forward (+50 MiB back) on every device and the demuxer fills
+ * whatever it is allowed, which crowds a 1 GB TV box until Android's
+ * low-memory killer takes the whole app. Tiered off
+ * [android.app.ActivityManager.getLargeMemoryClass], the same signal
+ * `stream_buffer_sizing.dart` and ExoPlayer's `LoadControlPolicy` use.
+ *
+ * Applied as pre-init *options* in [MpvPlayerCore], so a `demuxer-max-bytes`
+ * line in the user's mpv.conf still wins.
+ */
+data class DemuxerBudget(val aheadBytes: Long, val backBytes: Long) {
+  companion object {
+    private const val MIB = 1024L * 1024L
+
+    /** Null for an unknown class (<= 0): callers keep mpv's own defaults. */
+    fun forHeapClassMB(largeMemoryClassMB: Int): DemuxerBudget? = when {
+      largeMemoryClassMB <= 0 -> null
+      largeMemoryClassMB <= 256 -> DemuxerBudget(aheadBytes = 32 * MIB, backBytes = 16 * MIB)
+      largeMemoryClassMB <= 512 -> DemuxerBudget(aheadBytes = 64 * MIB, backBytes = 32 * MIB)
+      else -> DemuxerBudget(aheadBytes = 100 * MIB, backBytes = 48 * MIB)
+    }
+  }
+}
@@ -0,0 +1,74 @@
+package com.edde746.plezy.mpv
+
+import android.opengl.EGL14
+
+/**
+ * Which mpv `egl-output-format` this device can pair with a BT.2020 PQ window
+ * surface, or null when HDR GL output is unavailable. 10-bit fixed point is
+ * preferred; fp16 is the fallback because some drivers (Tegra among them)
+ * expose the PQ colorspace but no 1010102 window config.
+ *
+ * Both halves are required by the mpv side: the fork's android GL context asks
+ * for `EGL_EXT_gl_colorspace_bt2020_pq` on the window surface, and the app
+ * pairs it with an `egl-output-format` that makes mpv's EGL config selection
+ * fail outright when no matching config exists - so this probe must be
+ * consulted before those options are ever set.
+ */
+internal object EglHdrCaps {
+  private const val EGL_COLOR_COMPONENT_TYPE_EXT = 0x3339
+  private const val EGL_COLOR_COMPONENT_TYPE_FLOAT_EXT = 0x333B
+
+  private object Unprobed
+
+  @Volatile private var cached: Any? = Unprobed
+
+  fun pqOutputFormat(): String? {
+    val value = cached
+    if (value !== Unprobed) return value as String?
+    return probe().also { cached = it }
+  }
+
+  private fun probe(): String? {
+    val display = EGL14.eglGetDisplay(EGL14.EGL_DEFAULT_DISPLAY)
+    if (display == EGL14.EGL_NO_DISPLAY) return null
+    val version = IntArray(2)
+    // Deliberately no eglTerminate: the default display is process-global and
+    // Flutter's renderer shares it; terminating would invalidate its state.
+    if (!EGL14.eglInitialize(display, version, 0, version, 1)) return null
+    val extensions = EGL14.eglQueryString(display, EGL14.EGL_EXTENSIONS) ?: return null
+    if (!extensions.contains("EGL_EXT_gl_colorspace_bt2020_pq")) return null
+    if (hasWindowConfig(display, intArrayOf(EGL14.EGL_RED_SIZE, 10, EGL14.EGL_GREEN_SIZE, 10, EGL14.EGL_BLUE_SIZE, 10, EGL14.EGL_ALPHA_SIZE, 2))) {
+      return "rgb10_a2"
+    }
+    if (extensions.contains("EGL_EXT_pixel_format_float") &&
+      hasWindowConfig(
+        display,
+        intArrayOf(
+          EGL14.EGL_RED_SIZE,
+          16,
+          EGL14.EGL_GREEN_SIZE,
+          16,
+          EGL14.EGL_BLUE_SIZE,
+          16,
+          EGL_COLOR_COMPONENT_TYPE_EXT,
+          EGL_COLOR_COMPONENT_TYPE_FLOAT_EXT
+        )
+      )
+    ) {
+      return "rgba16f"
+    }
+    return null
+  }
+
+  private fun hasWindowConfig(display: android.opengl.EGLDisplay, extra: IntArray): Boolean {
+    val attribs = intArrayOf(
+      EGL14.EGL_SURFACE_TYPE,
+      EGL14.EGL_WINDOW_BIT,
+      EGL14.EGL_RENDERABLE_TYPE,
+      EGL14.EGL_OPENGL_ES2_BIT
+    ) + extra + intArrayOf(EGL14.EGL_NONE)
+    val numConfigs = IntArray(1)
+    if (!EGL14.eglChooseConfig(display, attribs, 0, null, 0, 0, numConfigs, 0)) return false
+    return numConfigs[0] > 0
+  }
+}
@@ -0,0 +1,60 @@
+package com.edde746.plezy.mpv
+
+/**
+ * Pure policy for when an mpv session must leave the video plane
+ * (vo=mediacodec) for a GL video output, and which one. Kept free of player
+ * and platform state so the routing matrix is unit-testable.
+ */
+internal object GpuVoPolicy {
+  /**
+   * Single-layer Dolby Vision Profile 5 (IPT-PQ-c2) has no compatible base
+   * layer: on a device without native DV support it decodes as plain HEVC
+   * with garbage colors, and the video plane applies no reshaping. gpu-next
+   * (libplacebo) under software decode is the only Android path that
+   * composites the RPU metadata (#1902). [dvProfile] comes from mpv's
+   * track-list — the bitstream's DOVI configuration record — never from
+   * server metadata, which mis-tags DV routinely. Only `auto` routes; the
+   * other modes are explicit user choices.
+   */
+  fun needsDvReshaping(dvProfile: Long?, conversionMode: String, canPlayP5Natively: Boolean): Boolean = dvProfile == 5L && conversionMode == "auto" && !canPlayP5Natively
+
+  /**
+   * Whether an HDR signal has nowhere to tone-map: the video plane hands
+   * PQ/HLG straight to a display pipeline that advertises no HDR output, so
+   * it renders washed out (#2121). The GL vo tone-maps in the render chain.
+   */
+  fun needsHdrToneMapping(gamma: String?, displaySupportsHdr: Boolean): Boolean = (gamma == "pq" || gamma == "hlg") && !displaySupportsHdr
+
+  /**
+   * Whether the decoder is handing mpv software frames, from `hwdec-current`.
+   *
+   * The plane refuses every format but MediaCodec buffers, so a per-file
+   * decode fallback (AV1 on Tegra, Hi10 without a profile match) has to move
+   * to a GL vo. Routing on this gets there before mpv fails the chain and
+   * [REASON_CHAIN_FAILURE] has to catch it.
+   */
+  fun needsSoftwareRender(hwdecCurrent: String?): Boolean = !hwdecCurrent.isNullOrBlank() && hwdecCurrent != "mediacodec"
+
+  /**
+   * The vo a session with these active requirements should run, or null for
+   * the video plane.
+   *
+   * dv-reshape is the only reason that needs gpu-next, since libplacebo is
+   * what composites the RPU. Everything else takes gpu, the battle-tested
+   * GLES renderer on the Android device zoo. (The magenta field gpu-next
+   * used to render for 10-bit software frames on Tegra was its AV1 film
+   * grain shader overrunning the driver's uniform register budget; grain is
+   * decoder-applied now, but gpu-next buys this path nothing over gpu.)
+   */
+  fun targetFor(reasons: Set<String>): String? = when {
+    reasons.isEmpty() -> null
+    REASON_DV_RESHAPE in reasons -> "gpu-next"
+    else -> "gpu"
+  }
+
+  const val REASON_DV_RESHAPE = "dv-reshape"
+  const val REASON_SHADERS = "shaders"
+  const val REASON_CHAIN_FAILURE = "chain-failure"
+  const val REASON_HDR_SDR = "hdr-sdr"
+  const val REASON_SW_DECODE = "sw-decode"
+}
@@ -1,9 +1,9 @@
 package com.edde746.plezy.mpv

-import dev.jdtech.mpv.EndFileReason
-import dev.jdtech.mpv.LogLevel
-import dev.jdtech.mpv.LogMessage
-import dev.jdtech.mpv.MpvEvent
+import com.edde746.plezy.libmpv.EndFileReason
+import com.edde746.plezy.libmpv.LogLevel
+import com.edde746.plezy.libmpv.LogMessage
+import com.edde746.plezy.libmpv.MpvEvent

 /** Adds the native diagnostic that libmpv-android exposes separately via logFlow. */
 internal class MpvEndFileDiagnostics {
@@ -1,6 +1,7 @@
 package com.edde746.plezy.mpv

 import android.app.Activity
+import android.app.ActivityManager
 import android.content.Context
 import android.graphics.PixelFormat
 import android.media.AudioAttributes
@@ -15,12 +16,13 @@ import android.view.SurfaceView
 import android.view.View
 import android.view.ViewGroup
 import android.view.ViewTreeObserver
+import com.edde746.plezy.exoplayer.DoviBridge
+import com.edde746.plezy.libmpv.*
 import com.edde746.plezy.shared.AudioFocusManager
 import com.edde746.plezy.shared.FrameRateManager
 import com.edde746.plezy.shared.PlayerDelegate
 import com.edde746.plezy.shared.PlayerSurfaceHost
 import com.edde746.plezy.shared.SurfacePlayerCore
-import dev.jdtech.mpv.*
 import kotlinx.coroutines.*
 import kotlinx.coroutines.sync.Mutex
 import kotlinx.coroutines.sync.withLock
@@ -63,24 +65,41 @@ class MpvPlayerCore private constructor(
     * The initial `vo` chain, decided by whether this session will hardware-
     * decode.
     *
-     * gpu-next (libplacebo) is the only Android path that applies Dolby Vision
-     * RPU reshaping (#1902), but reshaping only ever happens under software
-     * decode: FFmpeg's mediacodec wrapper exports no DOVI side data, so a
-     * hardware-decoded stream renders the untouched base layer on any VO.
-     * Hardware decode is also where gpu-next breaks: it samples the decoder
-     * output as a samplerExternalOES that libplacebo declares in both shader
-     * stages, and the Tegra GLES linker rejects that pair ("struct type
-     * mismatch between shaders for uniform"), failing every frame — a solid
-     * blue screen with audio on the Shield (#2010). The in-chain gpu fallback
-     * cannot catch it because gpu-next initializes fine and only fails
-     * per-frame renders.
+     * Hardware sessions use the fork vo=mediacodec: decoded buffers go from
+     * MediaCodec straight to the compositor with per-frame presentation
+     * timestamps - no GLES pass, 10-bit and the decoder's dataspace
+     * (HDR10/HLG) intact - and subtitles/OSD render on the sibling OSD
+     * surface. The plane takes decoder buffers only and refuses the rest, so
+     * a per-file decode fallback moves to a GL vo
+     * ([GpuVoPolicy.needsSoftwareRender], with the chain-failure watchdog as
+     * the backstop). gpu stays in the chain for preinit failure.
     *
-     * So gpu-next is offered exactly where it can help — sessions that will
-     * software-decode — and hardware sessions keep the legacy gpu VO. A
-     * mid-session hwdec fallback to software stays on vo=gpu, which renders
-     * software frames correctly (the pre-2.15.0 behavior for every session).
+     * Software sessions run gpu,gpu-next: gpu is the battle-tested GLES
+     * renderer on the Android device zoo, and with film grain applied by the
+     * decoder nothing else on this path needs libplacebo. Dolby Vision RPU
+     * reshaping (#1902) is the one exception - it needs gpu-next, and the
+     * [GpuVoPolicy.REASON_DV_RESHAPE] observer moves the session there when a
+     * DV profile that needs reshaping appears. gpu-next under *hardware*
+     * decode is broken on Tegra (samplerExternalOES double declaration
+     * rejected by the GLES linker, blue screen on the Shield, #2010);
+     * vo=mediacodec sidesteps that entire class by never touching GLES.
     */
-    internal fun initialVideoOutput(hardwareDecoding: Boolean): String = if (hardwareDecoding) "gpu" else "gpu-next,gpu"
+    internal fun initialVideoOutput(hardwareDecoding: Boolean): String = if (hardwareDecoding) "mediacodec,gpu" else "gpu,gpu-next"
+
+    /**
+     * The `-append` list-option suffixes are not exposed through the property
+     * interface, so the app's decoder options replace the whole list. FFmpeg
+     * keeps the last duplicate key, so any user mpv.conf entries go first.
+     */
+    internal fun mergeDecoderOptions(current: String?, ours: String): String = if (current.isNullOrBlank()) ours else "$current,$ours"
+
+    /**
+     * Whether content with this transfer is worth an HDR (BT.2020 PQ) GL
+     * surface. PQ and HLG both render into a PQ target; everything else -
+     * including unknown - stays on the default sRGB surface, which renders
+     * every content correctly (HDR arrives tone-mapped, as before).
+     */
+    internal fun wantsHdrSurface(transfer: String?): Boolean = transfer == "smpte2084" || transfer == "arib-std-b67"
  }

  /** Video-only paths. The plugin always constructs video cores with the
@@ -89,7 +108,57 @@ class MpvPlayerCore private constructor(
    get() = context as Activity

  private var surfaceView: SurfaceView? = null
+  private var osdSurfaceView: SurfaceView? = null
  private var surfaceContainer: android.widget.FrameLayout? = null
+
+  @Volatile private var pendingOsdSurface: Surface? = null
+
+  @Volatile private var attachedOsdSurface: Surface? = null
+
+  /** Active reasons the session must render off the plane. */
+  private val gpuVoReasons = LinkedHashSet<String>()
+
+  /** The GL vo this session is running, or null for the video plane. Non-null
+   * gates off the plane-only machinery: OSD attach, aspect-fitted layout,
+   * chain-failure watchdog. Written under [gpuVoReasons]. */
+  @Volatile private var activeGpuVoTarget: String? = null
+
+  /** Whether the per-file DV policy is holding hwdec at `no`; the session's
+   * own hwdec value is parked in [hwdecBeforeDvReshape] meanwhile. */
+  @Volatile private var dvReshapeActive: Boolean = false
+
+  private val hwdecBeforeDvReshape = java.util.concurrent.atomic.AtomicReference<String?>()
+
+  /** Last `dv-conversion-mode` Dart applied; input to the per-file DV
+   * routing policy. */
+  @Volatile private var currentDvConversionMode: String = "auto"
+
+  /** Whether this core already decided its GL surface colorspace; set by the
+   * first `content-color-transfer` announcement ([applyContentColorTransfer]). */
+  @Volatile private var hdrSurfaceDecided: Boolean = false
+
+  /** Whether this session outputs HDR to an HDR-capable display — via the PQ
+   * GL surface or the MediaCodec plane's decoder dataspace. Gates the
+   * deferred display-mode restore on teardown (see
+   * [FrameRateManager.clearVideoFrameRate]). */
+  @Volatile private var hdrDisplayActive: Boolean = false
+
+  @Volatile private var videoDisplayWidth: Int = 0
+
+  @Volatile private var videoDisplayHeight: Int = 0
+
+  /** Latest `panscan` (0..1) and `video-zoom` (log2) the app applied. The
+   * plane owns scaling, so these are view geometry here; see
+   * [applyVideoRectLayout]. */
+  @Volatile private var videoPanscan: Float = 0f
+
+  @Volatile private var videoZoomLog2: Float = 0f
+
+  /** Hardware sessions render through the fork vo=mediacodec (see
+   * [initialVideoOutput]); the OSD surface and video-rect layout exist only
+   * there. */
+  private val usesMediaCodecVo: Boolean
+    get() = !audioOnly && hardwareDecoding
  private var overlayLayoutListener: ViewTreeObserver.OnGlobalLayoutListener? = null

  @Volatile private var disposing: Boolean = false
@@ -260,6 +329,22 @@ class MpvPlayerCore private constructor(
      lastAppliedSurfaceSize = null
      lastKnownSurfaceWidth = 0
      lastKnownSurfaceHeight = 0
+      // Video-output state, so a re-initialized core does not start stranded
+      // off the plane with a stale reason set.
+      synchronized(gpuVoReasons) {
+        gpuVoReasons.clear()
+        activeGpuVoTarget = null
+      }
+      hwdecBeforeDvReshape.set(null)
+      dvReshapeActive = false
+      attachedOsdSurface = null
+      videoDisplayWidth = 0
+      videoDisplayHeight = 0
+      videoPanscan = 0f
+      videoZoomLog2 = 0f
+      currentDvConversionMode = "auto"
+      hdrSurfaceDecided = false
+      hdrDisplayActive = false
      if (!audioOnly) ensurePlaceholderSurface()

      // Initialize audio focus handling. mpv has none built in, so both modes
@@ -287,6 +372,10 @@ class MpvPlayerCore private constructor(
        surfaceContainer = PlayerSurfaceHost.createContainer(activity)
        surfaceView = PlayerSurfaceHost.createVideoSurface(activity, this@MpvPlayerCore)
        surfaceContainer!!.addView(surfaceView)
+        if (usesMediaCodecVo) {
+          osdSurfaceView = PlayerSurfaceHost.createOsdSurface(activity, osdSurfaceCallback)
+          surfaceContainer!!.addView(osdSurfaceView)
+        }

        val contentView = PlayerSurfaceHost.attachToContent(activity, surfaceContainer!!)
        flutterOverlayApplied = PlayerSurfaceHost.ensureFlutterOverlayOnTop(contentView, surfaceContainer)
@@ -295,6 +384,7 @@ class MpvPlayerCore private constructor(
          ensureFlutterOverlayOnTop()
          val sv = surfaceView
          if (sv != null) applySurfaceSize(sv.width, sv.height)
+          applyVideoRectLayout()
        }
        contentView.viewTreeObserver.addOnGlobalLayoutListener(overlayLayoutListener)

@@ -308,6 +398,11 @@ class MpvPlayerCore private constructor(
            return@launch
          }
          val displayFpsOverride = currentDisplayFpsOverride()
+          // Both core kinds cap their demuxer cache off the device heap class;
+          // rationale on DemuxerBudget. Null (unknown class) keeps mpv defaults.
+          val demuxerBudget = DemuxerBudget.forHeapClassMB(
+            (context.getSystemService(Context.ACTIVITY_SERVICE) as? ActivityManager)?.largeMemoryClass ?: 0
+          )
          val p = MpvPlayer.create(context.applicationContext) {
            if (audioOnly) {
              // Pure audio core (all set before mpv_initialize, mirroring the
@@ -322,15 +417,25 @@ class MpvPlayerCore private constructor(
              setOption("gapless-audio", "weak")
            } else {
              // vo choice is decode-path-dependent; rationale on
-              // initialVideoOutput. Film grain is left on its `auto` default:
-              // applied by the VO under gpu-next, by the decoder under gpu.
+              // initialVideoOutput.
              setOption("vo", initialVideoOutput(hardwareDecoding))
              setOption("gpu-context", "android")
              setOption("opengl-es", "yes")
+              // Keep AV1 film grain inside the decoder (dav1d). `auto` hands it
+              // to any vo claiming VO_CAP_FILM_GRAIN, and gpu-next claims it on
+              // GLES where libplacebo's raster grain fallback fetches luma by
+              // fragcoord (bottom-up) but chroma by uv: the luma renders
+              // upside-down (measured on a Shield Pro; desktop GL is unaffected
+              // because grain runs as a compute pass there).
+              setOption("vd-lavc-film-grain", "cpu")
              if (displayFpsOverride != null) {
                setOption("display-fps-override", displayFpsOverride)
              }
            }
+            if (demuxerBudget != null) {
+              setOption("demuxer-max-bytes", demuxerBudget.aheadBytes.toString())
+              setOption("demuxer-max-back-bytes", demuxerBudget.backBytes.toString())
+            }
            setOption("ao", "audiotrack,opensles")
            // Pause on the last frame at EOF instead of unloading the file, so a
            // seek after the video ends still works (matches Linux/Windows).
@@ -342,6 +447,13 @@ class MpvPlayerCore private constructor(
            // builtin script during mpv_initialize, hence an option here.
            setOption("ytdl", "no")
          }
+          if (demuxerBudget != null) {
+            Log.d(
+              TAG,
+              "Demuxer budget: ${demuxerBudget.aheadBytes / (1024 * 1024)}MB ahead, " +
+                "${demuxerBudget.backBytes / (1024 * 1024)}MB back"
+            )
+          }
          if (displayFpsOverride != null) {
            Log.d(TAG, "Initial display-fps-override=$displayFpsOverride")
          }
@@ -361,6 +473,12 @@ class MpvPlayerCore private constructor(
          collectEvents(p)
          collectPropertyChanges(p)
          collectLogMessages(p)
+          if (usesMediaCodecVo) {
+            collectVideoDimensions(p)
+            collectShaderState(p)
+            collectHdrToneMapState(p)
+            collectDecoderState(p)
+          }

          Log.d(TAG, "Initialized successfully")
          onResult(true)
@@ -397,11 +515,28 @@ class MpvPlayerCore private constructor(
          }
          is MpvEvent.StartFile -> {
            endFileDiagnostics.onStartFile()
+            // The trigger is per-file (an exotic pixel format, a gralloc
+            // refusal for that stream), so give the plane back to the next
+            // file. A genuine failure re-arms it, costing one switch per bad
+            // file instead of the whole session's HDR/10-bit scanout.
+            setGpuVoRequirement(GpuVoPolicy.REASON_CHAIN_FAILURE, false)
            delegate?.onEvent("start-file", null)
          }
-          is MpvEvent.FileLoaded -> delegate?.onEvent("file-loaded", null)
+          is MpvEvent.FileLoaded -> {
+            if (usesMediaCodecVo) {
+              scope.launch(mpvWriteDispatcher, start = CoroutineStart.ATOMIC) {
+                try {
+                  applyDvReshapePolicy(p)
+                } catch (e: CancellationException) {
+                  Log.d(TAG, "Canceled DV routing policy")
+                } catch (e: Exception) {
+                  Log.w(TAG, "DV routing policy failed", e)
+                }
+              }
+            }
+            delegate?.onEvent("file-loaded", null)
+          }
          is MpvEvent.PlaybackRestart -> delegate?.onEvent("playback-restart", null)
-          else -> {}
        }
      }
    }
@@ -433,6 +568,18 @@ class MpvPlayerCore private constructor(
    scope.launch(start = CoroutineStart.UNDISPATCHED) {
      p.logFlow.collect { msg ->
        endFileDiagnostics.onLogMessage(msg)
+        // A chain-init failure is the one runtime signal that frames cannot
+        // reach the video plane at all (exotic pixel formats, gralloc
+        // refusal). mpv is pinned in the fork, so the log line is a stable
+        // contract.
+        if (usesMediaCodecVo &&
+          activeGpuVoTarget == null &&
+          msg.prefix.startsWith("cplayer") &&
+          msg.text.contains("Could not initialize video chain")
+        ) {
+          Log.w(TAG, "Video chain init failed under vo=mediacodec; leaving the video plane")
+          setGpuVoRequirement(GpuVoPolicy.REASON_CHAIN_FAILURE, true)
+        }
        emitLog(msg.level.name.lowercase(), msg.prefix, msg.text)
      }
    }
@@ -484,6 +631,300 @@ class MpvPlayerCore private constructor(
    detachSurfaceInternal(reason = "surfaceDestroyed")
  }

+  // OSD surface (the vo=mediacodec subtitle/OSD plane)
+
+  private val osdSurfaceCallback = object : SurfaceHolder.Callback {
+    override fun surfaceCreated(holder: SurfaceHolder) {
+      if (disposing) return
+      pendingOsdSurface = holder.surface.takeIf { it.isValid }
+      Log.d(TAG, "OSD surface created")
+      if (player != null && hasAttachedRealSurface()) {
+        refreshVideoOutput("osdSurfaceCreated")
+      }
+    }
+
+    override fun surfaceChanged(holder: SurfaceHolder, format: Int, width: Int, height: Int) {}
+
+    override fun surfaceDestroyed(holder: SurfaceHolder) {
+      Log.d(TAG, "OSD surface destroyed")
+      pendingOsdSurface = null
+      val wasAttached = attachedOsdSurface != null
+      attachedOsdSurface = null
+      val p = player ?: return
+      if (disposing || !wasAttached) return
+      // Ordered against every other mpv write: a detach that overtook the
+      // re-attach of a recreated surface would clear the option the attach
+      // just set, and nothing re-arms it — subtitles would stay dead for the
+      // rest of the session.
+      scope.launch(mpvWriteDispatcher) {
+        try {
+          p.detachOsdSurface()
+        } catch (e: Exception) {
+          Log.w(TAG, "Failed to detach OSD surface", e)
+        }
+      }
+    }
+  }
+
+  /**
+   * Hands the OSD Surface to the vo. The vo reads the option when it is
+   * created, so this has to run before the `vo` or `wid` write that creates
+   * it, never after.
+   */
+  private fun attachOsdSurfaceIfNeeded(p: MpvPlayer) {
+    if (!usesMediaCodecVo || activeGpuVoTarget != null) return
+    val osd = pendingOsdSurface?.takeIf { it.isValid } ?: return
+    if (osd === attachedOsdSurface) return
+    p.attachOsdSurface(osd)
+    attachedOsdSurface = osd
+    Log.d(TAG, "Attached OSD surface for vo=mediacodec")
+  }
+
+  private fun collectVideoDimensions(p: MpvPlayer) {
+    scope.launch(start = CoroutineStart.UNDISPATCHED) {
+      p.observeInt("dwidth").collect { value ->
+        val w = value.toInt()
+        if (w > 0 && w != videoDisplayWidth) {
+          videoDisplayWidth = w
+          applyVideoRectLayout()
+        }
+      }
+    }
+    scope.launch(start = CoroutineStart.UNDISPATCHED) {
+      p.observeInt("dheight").collect { value ->
+        val h = value.toInt()
+        if (h > 0 && h != videoDisplayHeight) {
+          videoDisplayHeight = h
+          applyVideoRectLayout()
+        }
+      }
+    }
+  }
+
+  /**
+   * Arbiter for this session's video output: the active [GpuVoPolicy] reasons
+   * decide whether the session runs on the video plane or on a GL vo.
+   */
+  private fun setGpuVoRequirement(reason: String, active: Boolean) {
+    if (!usesMediaCodecVo || disposing) return
+    val transition = synchronized(gpuVoReasons) {
+      val changed = if (active) gpuVoReasons.add(reason) else gpuVoReasons.remove(reason)
+      if (!changed) return
+      val desired = GpuVoPolicy.targetFor(gpuVoReasons)
+      if (desired == activeGpuVoTarget) return
+      val line = "${activeGpuVoTarget ?: "mediacodec"} -> ${desired ?: "mediacodec"} " +
+        "(reasons=[${gpuVoReasons.joinToString(",")}])"
+      activeGpuVoTarget = desired
+      line
+    }
+    Log.i(TAG, "Video output: $transition")
+    applyGpuVoTarget()
+  }
+
+  /**
+   * Moves the session to whatever the arbiter last decided.
+   *
+   * The decision is atomic under [gpuVoReasons], but the write cannot be:
+   * it has to leave the lock to reach mpv. Reasons are raised from different
+   * threads — per-file DV routing runs on [mpvWriteDispatcher], the gamma,
+   * shader and chain-failure observers on the main thread — so the order
+   * writes are *enqueued* is not the order decisions were *made*. Rather
+   * than trust the target its caller saw, every transition re-reads the
+   * current one here, which makes the last write the right one under any
+   * interleaving. Serialized on [mpvWriteDispatcher], so the paired main
+   * thread work stays in the same order too.
+   */
+  private fun applyGpuVoTarget() {
+    scope.launch(mpvWriteDispatcher, start = CoroutineStart.ATOMIC) {
+      val target = synchronized(gpuVoReasons) { activeGpuVoTarget }
+      runOnMain {
+        if (disposing) return@runOnMain
+        if (target == null) {
+          osdSurfaceView?.visibility = View.VISIBLE
+        } else {
+          // The gpu VOs draw their own OSD; a stale subtitle frame must not
+          // linger on the overlay plane.
+          osdSurfaceView?.visibility = View.GONE
+          resetVideoSurfaceToFullContainer()
+        }
+      }
+      try {
+        // Before the vo write, which recreates the VO: it reads the OSD
+        // surface option at creation.
+        val p = player
+        if (target == null && p != null) attachOsdSurfaceIfNeeded(p)
+        writeProperty("vo", target ?: "mediacodec")
+        if (p == null) return@launch
+        if (target != null) {
+          // A failed conversion chain makes mpv deselect the video track
+          // ("Could not initialize video chain" -> vid=no) before the VO
+          // switch lands. Re-select the explicit track id: mid-file "auto"
+          // resolves to no selection rather than re-running selection.
+          if (p.getString("vid").let { it == null || it == "no" }) {
+            val videoTrackId = videoTracks(p).firstOrNull()?.optLong("id")
+            if (videoTrackId != null) {
+              Log.i(TAG, "Re-selecting video track $videoTrackId after chain failure")
+              writeProperty("vid", videoTrackId.toString())
+            }
+          }
+        }
+        applySurfaceSizeInternal(p, force = true)
+        if (target == null) {
+          // Refit the surfaces to the aspect rectangle now that the plane
+          // owns scaling again (the gpu VOs letterboxed within full
+          // containers).
+          applyVideoRectLayout()
+        }
+      } catch (e: CancellationException) {
+        Log.d(TAG, "Canceled vo transition write")
+      } catch (e: Exception) {
+        Log.w(TAG, "Failed to move the video output to ${target ?: "mediacodec"}", e)
+      }
+    }
+  }
+
+  /**
+   * Per-file Dolby Vision routing, decided from the bitstream: mpv exports
+   * the DOVI configuration record's profile on the track list (never trust
+   * server metadata for this — it mis-tags DV routinely). Re-evaluated on
+   * every file-loaded, so a following non-P5 file restores hardware decode
+   * and returns to the video plane.
+   */
+  private suspend fun applyDvReshapePolicy(p: MpvPlayer) {
+    val profile = selectedVideoDvProfile(p)
+    val needs = GpuVoPolicy.needsDvReshaping(
+      dvProfile = profile,
+      conversionMode = currentDvConversionMode,
+      canPlayP5Natively = DoviBridge.canPlayDolbyVisionP5(context)
+    )
+    if (needs == dvReshapeActive) return
+    dvReshapeActive = needs
+    if (needs) {
+      Log.i(TAG, "DV P5 (bitstream) without native support: software decode + gpu-next reshaping")
+      val current = p.getString("hwdec")
+      hwdecBeforeDvReshape.set(current ?: "no")
+      writeProperty("hwdec", "no")
+    } else {
+      val restore = hwdecBeforeDvReshape.getAndSet(null)
+      if (restore != null && restore != "no") writeProperty("hwdec", restore)
+    }
+    setGpuVoRequirement(GpuVoPolicy.REASON_DV_RESHAPE, needs)
+  }
+
+  /**
+   * Selected video track's Dolby Vision profile, or null for non-DV content
+   * (mpv omits the field when the bitstream carries no DOVI configuration
+   * record).
+   */
+  private suspend fun selectedVideoDvProfile(p: MpvPlayer): Long? = videoTracks(p).firstOrNull()
+    ?.takeIf { it.has("dolby-vision-profile") }
+    ?.getLong("dolby-vision-profile")
+
+  /**
+   * Observed rather than derived from the hardware-decoding setting because
+   * the fallback is decided per file, inside mpv. Why it matters:
+   * [GpuVoPolicy.needsSoftwareRender].
+   */
+  private fun collectDecoderState(p: MpvPlayer) {
+    scope.launch(start = CoroutineStart.UNDISPATCHED) {
+      p.observeString("hwdec-current").collect { value ->
+        setGpuVoRequirement(GpuVoPolicy.REASON_SW_DECODE, GpuVoPolicy.needsSoftwareRender(value))
+      }
+    }
+  }
+
+  /**
+   * User shaders need a GL vo; the video plane renders none. Observed
+   * natively so Dart's `glsl-shaders` change-list writes (ShaderService,
+   * ambient lighting) switch the session live, without a channel contract.
+   */
+  private fun collectShaderState(p: MpvPlayer) {
+    scope.launch(start = CoroutineStart.UNDISPATCHED) {
+      p.observeString("glsl-shaders").collect { value ->
+        setGpuVoRequirement(GpuVoPolicy.REASON_SHADERS, value.isNotBlank())
+      }
+    }
+  }
+
+  /**
+   * Observed from video-params so the reason follows per-file transfer
+   * changes, and the display is re-queried per change so an HDMI mode switch
+   * mid-session is honoured on the next file. Why it matters:
+   * [GpuVoPolicy.needsHdrToneMapping].
+   */
+  private fun collectHdrToneMapState(p: MpvPlayer) {
+    scope.launch(start = CoroutineStart.UNDISPATCHED) {
+      p.observeString("video-params/gamma").collect { value ->
+        val needsToneMap = GpuVoPolicy.needsHdrToneMapping(
+          gamma = value,
+          displaySupportsHdr = DoviBridge.displaySupportsHdr(context)
+        )
+        setGpuVoRequirement(GpuVoPolicy.REASON_HDR_SDR, needsToneMap)
+      }
+    }
+  }
+
+  /** Video tracks from mpv's track list, selected first; empty on any parse failure. */
+  private suspend fun videoTracks(p: MpvPlayer): List<org.json.JSONObject> {
+    val json = p.getString("track-list") ?: return emptyList()
+    return try {
+      val tracks = org.json.JSONArray(json)
+      (0 until tracks.length())
+        .map { tracks.getJSONObject(it) }
+        .filter { it.optString("type") == "video" }
+        .sortedByDescending { it.optBoolean("selected") }
+    } catch (e: Exception) {
+      Log.w(TAG, "Failed to parse track-list", e)
+      emptyList()
+    }
+  }
+
+  /**
+   * Sizes the video surface to the rectangle the image should occupy, per
+   * [VideoRectPolicy], and lets the container clip the overflow.
+   *
+   * The OSD surface is left full-container: the vo builds its `mp_osd_res`
+   * from the OSD window's own size, so libass keeps the whole window as its
+   * canvas — subtitles sit in the letterbox bars as they did under vo=gpu,
+   * and stay on screen when a zoomed image runs past the container.
+   */
+  private fun applyVideoRectLayout() {
+    if (!usesMediaCodecVo || activeGpuVoTarget != null) return
+    runOnMain {
+      if (disposing) return@runOnMain
+      val container = surfaceContainer ?: return@runOnMain
+      val size = VideoRectPolicy.sizeFor(
+        containerWidth = container.width,
+        containerHeight = container.height,
+        videoWidth = videoDisplayWidth,
+        videoHeight = videoDisplayHeight,
+        panscan = videoPanscan,
+        videoZoomLog2 = videoZoomLog2
+      ) ?: return@runOnMain
+      // The guard matters: this runs from an OnGlobalLayoutListener, so an
+      // unconditional write would re-trigger layout forever.
+      surfaceView?.let { view ->
+        val lp = view.layoutParams as android.widget.FrameLayout.LayoutParams
+        if (lp.width != size.width || lp.height != size.height || lp.gravity != android.view.Gravity.CENTER) {
+          lp.width = size.width
+          lp.height = size.height
+          lp.gravity = android.view.Gravity.CENTER
+          view.layoutParams = lp
+        }
+      }
+    }
+  }
+
+  private fun resetVideoSurfaceToFullContainer() {
+    val view = surfaceView ?: return
+    val lp = view.layoutParams as android.widget.FrameLayout.LayoutParams
+    if (lp.width == android.widget.FrameLayout.LayoutParams.MATCH_PARENT) return
+    lp.width = android.widget.FrameLayout.LayoutParams.MATCH_PARENT
+    lp.height = android.widget.FrameLayout.LayoutParams.MATCH_PARENT
+    lp.gravity = android.view.Gravity.NO_GRAVITY
+    view.layoutParams = lp
+  }
+
  private fun rememberSurfaceSize(width: Int, height: Int) {
    if (width <= 0 || height <= 0) return
    lastKnownSurfaceWidth = width
@@ -559,10 +1000,15 @@ class MpvPlayerCore private constructor(
            return@withLock
          }

-          val needsAttach = !hasAttachedSurface || attachedSurface !== surface
+          // An unattached OSD Surface forces a wid re-attach: the VO reads the
+          // OSD surface option at creation, and setting wid recreates the VO.
+          // Suppressed off the plane, where the GL vo draws its own OSD.
+          val osdNeedsAttach = activeGpuVoTarget == null && pendingOsdSurface !== attachedOsdSurface
+          val needsAttach = !hasAttachedSurface || attachedSurface !== surface || osdNeedsAttach
          val wasAttachedToPlaceholder = attachedToPlaceholder
          val wasPausedForSurfaceLoss = pausedForSurfaceLoss
          if (needsAttach) {
+            attachOsdSurfaceIfNeeded(p)
            p.attachSurface(surface)
            attachedSurface = surface
            hasAttachedSurface = true
@@ -880,12 +1326,136 @@ class MpvPlayerCore private constructor(
    Log.d(TAG, "Load pause intent updated: paused=$paused")
  }

+  /**
+   * `dv-conversion-mode` is an app-level property shared with the ExoPlayer
+   * and Apple cores, not an mpv one. It maps onto the fork FFmpeg
+   * hevc_mediacodec decoder options, mirroring the ExoPlayer DoviBridge
+   * decision tree. Single-layer profiles (5/8) use the Dolby Vision decoder
+   * whenever the path is enabled and the decoder advertises the profile.
+   */
+  private fun applyDvConversionMode(value: String, onComplete: ((Result<Unit>) -> Unit)?) {
+    val displayDv = DoviBridge.displaySupportsDolbyVision(context)
+    val (dolbyVision, p7Mode) = when (value.trim().lowercase()) {
+      "auto" -> if (displayDv) "1" to "auto" else "0" to "strip"
+      "disabled", "native" -> "1" to "native"
+      "dv81" -> "1" to "convert"
+      "hevc", "hevc_strip" -> "1" to "strip"
+      else -> {
+        onComplete?.invoke(Result.failure(IllegalArgumentException("Invalid DV conversion mode: $value")))
+        return
+      }
+    }
+    currentDvConversionMode = value.trim().lowercase()
+    Log.i(TAG, "DV conversion mode '$value' (displayDV=$displayDv) -> dolby_vision=$dolbyVision dv_p7_mode=$p7Mode")
+    scope.launch(mpvWriteDispatcher, start = CoroutineStart.ATOMIC) {
+      val completion = try {
+        val ours = "dolby_vision=$dolbyVision,dv_p7_mode=$p7Mode"
+        val merged = mergeDecoderOptions(player?.getString("vd-lavc-o"), ours)
+        writeProperty("vd-lavc-o", merged)
+        Result.success(Unit)
+      } catch (error: CancellationException) {
+        Result.failure(error)
+      } catch (error: Exception) {
+        Log.w(TAG, "DV conversion mode write failed")
+        Result.failure(error)
+      }
+      withContext(NonCancellable + Dispatchers.Main) {
+        onComplete?.invoke(completion)
+      }
+    }
+  }
+
+  /**
+   * `content-color-transfer` is an app-level property: Dart announces the
+   * selected stream's transfer (server metadata) before playback so an HDR
+   * session can get a BT.2020 PQ 10-bit GL surface instead of tone-mapped
+   * SDR. Consumed by whichever android GL context the session ever creates -
+   * up front for a software session, or at the fallback transition when a
+   * plane session leaves vo=mediacodec (the plane itself carries HDR via the
+   * decoder's dataspace and ignores all of this).
+   *
+   * The first announcement decides for the whole core: the surface colorspace
+   * is fixed at EGL-surface creation, and both latched states stay correct
+   * for later files (a PQ target renders SDR content correctly, an sRGB
+   * surface tone-maps HDR as before) - re-deciding mid-session could pair a
+   * live sRGB surface with a PQ render target, which is wrong everywhere.
+   */
+  private fun applyContentColorTransfer(value: String, onComplete: ((Result<Unit>) -> Unit)?) {
+    val transfer = value.trim().lowercase()
+    if (hdrSurfaceDecided) {
+      onComplete?.invoke(Result.success(Unit))
+      return
+    }
+    hdrSurfaceDecided = true
+    val wants = wantsHdrSurface(transfer)
+    val displayHdr = wants && DoviBridge.displaySupportsHdr(context)
+    // Independent of the GL surface outcome: on the MediaCodec plane the
+    // decoder's dataspace carries HDR to the display without a PQ GL surface.
+    hdrDisplayActive = displayHdr
+    val outputFormat = if (wants) EglHdrCaps.pqOutputFormat() else null
+    if (!wants || !displayHdr || outputFormat == null) {
+      if (wants) {
+        Log.i(TAG, "HDR GL surface unavailable (transfer=$transfer displayHdr=$displayHdr eglFormat=$outputFormat)")
+      }
+      onComplete?.invoke(Result.success(Unit))
+      return
+    }
+    Log.i(TAG, "HDR GL surface engaged: BT.2020 PQ / $outputFormat for transfer=$transfer")
+    scope.launch(mpvWriteDispatcher, start = CoroutineStart.ATOMIC) {
+      val completion = try {
+        writeProperty("android-surface-colorspace", "bt2020-pq")
+        writeProperty("egl-output-format", outputFormat)
+        writeProperty("target-trc", "pq")
+        writeProperty("target-prim", "bt.2020")
+        Result.success(Unit)
+      } catch (error: CancellationException) {
+        Result.failure(error)
+      } catch (error: Exception) {
+        Log.w(TAG, "HDR surface property write failed")
+        Result.failure(error)
+      }
+      withContext(NonCancellable + Dispatchers.Main) {
+        onComplete?.invoke(completion)
+      }
+    }
+  }
+
  fun setProperty(name: String, value: String, onComplete: ((Result<Unit>) -> Unit)? = null) {
    if (!isInitialized || disposing || !scope.isActive) {
      onComplete?.invoke(Result.failure(CancellationException("MPV core unavailable")))
      return
    }

+    if (name == "dv-conversion-mode") {
+      applyDvConversionMode(value, onComplete)
+      return
+    }
+
+    if (name == "content-color-transfer") {
+      applyContentColorTransfer(value, onComplete)
+      return
+    }
+
+    // View geometry on the plane (see VideoRectPolicy), but both still fall
+    // through to mpv, which is what makes them work unchanged on the GL vos.
+    if (name == "panscan" || name == "video-zoom") {
+      val parsed = value.toFloatOrNull()
+      if (parsed != null) {
+        if (name == "panscan") videoPanscan = parsed else videoZoomLog2 = parsed
+        applyVideoRectLayout()
+      }
+    }
+
+    // While the per-file DV policy holds hwdec at `no`, park writes instead
+    // of applying them: a hardware value under gpu-next would lose the RPU
+    // side data (and blue-screen the Tegra class, #2010). The parked value
+    // is restored when a non-P5 file drops the requirement.
+    if (name == "hwdec" && dvReshapeActive) {
+      hwdecBeforeDvReshape.set(value)
+      onComplete?.invoke(Result.success(Unit))
+      return
+    }
+
    val paused = if (name == "pause") normalizePauseValue(value) else null
    val pauseIntent = paused?.let {
      synchronized(publicPauseIntentLock) {
@@ -1223,7 +1793,7 @@ class MpvPlayerCore private constructor(
  }

  override fun clearVideoFrameRate() {
-    frameRateManager?.clearVideoFrameRate()
+    frameRateManager?.clearVideoFrameRate(hdrActive = hdrDisplayActive)
  }

  // Cleanup
@@ -1274,11 +1844,15 @@ class MpvPlayerCore private constructor(

    // Capture locals for deferred cleanup (audio-only has no views)
    val sv = surfaceView
+    val osdSv = osdSurfaceView
    val container = surfaceContainer
    val contentView = if (audioOnly) null else activity.findViewById<ViewGroup>(android.R.id.content)

    surfaceContainer = null
    surfaceView = null
+    osdSurfaceView = null
+    pendingOsdSurface = null
+    attachedOsdSurface = null

    // Remove layout listener synchronously
    overlayLayoutListener?.let { listener ->
@@ -1330,6 +1904,7 @@ class MpvPlayerCore private constructor(
        Log.d(TAG, "Disposed (native)")
        Handler(Looper.getMainLooper()).post {
          sv?.holder?.removeCallback(this)
+          osdSv?.holder?.removeCallback(osdSurfaceCallback)
          if (container?.parent != null) {
            contentView?.removeView(container)
          }
@@ -1340,6 +1915,7 @@ class MpvPlayerCore private constructor(
      // No player — safe to remove views immediately
      Handler(Looper.getMainLooper()).postAtFrontOfQueue {
        sv?.holder?.removeCallback(this)
+        osdSv?.holder?.removeCallback(osdSurfaceCallback)
        if (container?.parent != null) {
          contentView?.removeView(container)
        }
@@ -1,6 +1,7 @@
 package com.edde746.plezy.mpv

 import android.app.Activity
+import android.app.ActivityManager
 import android.content.Context
 import android.net.Uri
 import android.os.ParcelFileDescriptor
@@ -14,6 +15,7 @@ import io.flutter.plugin.common.EventChannel
 import io.flutter.plugin.common.MethodCall
 import io.flutter.plugin.common.MethodChannel
 import java.util.concurrent.CancellationException
+import java.util.concurrent.atomic.AtomicBoolean

 internal fun completeMpvPropertyResult(
  result: MethodChannel.Result,
@@ -62,6 +64,17 @@ open class MpvPlayerPlugin(
  private val nameToId = mutableMapOf<String, Int>()
  private var sessionGeneration = 0

+  // The Dart instanceId that created the current core. A `dispose` carrying a
+  // different token lost the ownership race to a successor and must not tear
+  // down that successor's core; it is acknowledged without touching anything.
+  private var coreInstanceId: Long? = null
+
+  // How long a Dart `dispose` waits for the native teardown before being
+  // answered anyway. Generous against slow-but-healthy teardowns (a 4K HDR
+  // session's surface/audio release); small against the alternative, which
+  // is wedging every subsequent playback session behind a hung teardown.
+  private val disposeWatchdogMs = 6_000L
+
  /** Same semantics as Activity.runOnUiThread, without needing an Activity. */
  private fun runOnMain(block: () -> Unit) = channels.runOnMain(block)

@@ -95,6 +108,7 @@ open class MpvPlayerPlugin(
    ++sessionGeneration
    val core = playerCore
    playerCore = null
+    coreInstanceId = null
    cancelPendingInits()
    return core
  }
@@ -149,7 +163,7 @@ open class MpvPlayerPlugin(
  override fun onMethodCall(call: MethodCall, result: MethodChannel.Result) {
    when (call.method) {
      "initialize" -> handleInitialize(call, result)
-      "dispose" -> handleDispose(result)
+      "dispose" -> handleDispose(call, result)
      "setProperty" -> handleSetProperty(call, result)
      "getProperty" -> handleGetProperty(call, result)
      "getStats" -> handleGetStats(result)
@@ -164,6 +178,13 @@ open class MpvPlayerPlugin(
      "abandonAudioFocus" -> handleAbandonAudioFocus(result)
      "openContentFd" -> handleOpenContentFd(call, result)
      "closeContentFd" -> handleCloseContentFd(call, result)
+      "getHeapSize" -> {
+        // Device heap class for Dart-side memory tiering (stream ring cache).
+        // Lives on the always-registered mpv channel so it survives backends.
+        val context: Context? = activity ?: applicationContext
+        val am = context?.getSystemService(Context.ACTIVITY_SERVICE) as? ActivityManager
+        result.success(am?.largeMemoryClass ?: 0)
+      }
      "isInitialized" -> result.success(playerCore?.isInitialized ?: false)
      "setLogLevel" -> handleSetLogLevel(call, result)
      else -> result.notImplemented()
@@ -247,6 +268,7 @@ open class MpvPlayerPlugin(
          delegate = this@MpvPlayerPlugin
        }
        playerCore = core
+        coreInstanceId = call.argument<Number>("instanceId")?.toLong()
      } catch (e: Exception) {
        Log.e(tag, "Failed to initialize: ${e.message}", e)
        completePendingInits(attempt, success = false, errorMessage = e.message)
@@ -258,7 +280,10 @@ open class MpvPlayerPlugin(
          playerCore !== core ||
          !isCurrentInitAttempt(attempt)
        if (stale || !success) {
-          if (playerCore === core) playerCore = null
+          if (playerCore === core) {
+            playerCore = null
+            coreInstanceId = null
+          }
          core.dispose()
          if (stale) {
            Log.d(tag, "Stale init callback (gen=$gen, current=$sessionGeneration)")
@@ -315,13 +340,37 @@ open class MpvPlayerPlugin(
    }
  }

-  private fun handleDispose(result: MethodChannel.Result) {
+  private fun handleDispose(call: MethodCall, result: MethodChannel.Result) {
+    val token = call.argument<Number>("instanceId")?.toLong()
    runOnMain {
-      val core = takeCoreForTeardown()
-      core?.dispose {
-        Log.d(tag, "Disposed")
+      val owner = coreInstanceId
+      if (playerCore != null && token != null && owner != null && token != owner) {
+        // This dispose lost the ownership race: a successor already created
+        // the current core. Acknowledge without touching it.
+        Log.d(tag, "Ignoring stale dispose (token=$token, core owner=$owner)")
        result.success(null)
-      } ?: result.success(null)
+        return@runOnMain
+      }
+      val core = takeCoreForTeardown()
+      if (core == null) {
+        result.success(null)
+        return@runOnMain
+      }
+      // A hung native teardown must not wedge the Dart-side release chain:
+      // answer after the watchdog even if the teardown thread is stuck, so
+      // the next session can start on a fresh core. The stuck core leaks its
+      // resources until the process ends — recoverable, unlike the wedge.
+      val completed = AtomicBoolean(false)
+      fun completeOnce(reason: String) {
+        if (completed.compareAndSet(false, true)) {
+          Log.d(tag, reason)
+          result.success(null)
+        }
+      }
+      channels.mainHandler.postDelayed({
+        completeOnce("Dispose watchdog fired after ${disposeWatchdogMs}ms; teardown continues in background")
+      }, disposeWatchdogMs)
+      core.dispose { completeOnce("Disposed") }
    }
  }

@@ -0,0 +1,53 @@
+package com.edde746.plezy.mpv
+
+import kotlin.math.max
+import kotlin.math.min
+import kotlin.math.pow
+
+/**
+ * Pure geometry for the video plane's surface rectangle.
+ *
+ * The fork `vo=mediacodec` scales decoded buffers to the whole Surface and
+ * implements none of mpv's src/dst rect math, so aspect, cover and zoom are
+ * view geometry: the video surface is sized to the rectangle the image should
+ * occupy and the container clips whatever falls outside it. That mirrors the
+ * ExoPlayer path, which scales its own surface and keeps the subtitle overlay
+ * on the full-size container.
+ */
+internal object VideoRectPolicy {
+  /**
+   * `video-zoom` is reachable from the user's mpv.conf, where an absurd value
+   * is a compositor allocation rather than just arithmetic. Bounds it well
+   * outside the range the player's own zoom control offers.
+   */
+  private const val MAX_ZOOM_LOG2 = 2f
+
+  data class Size(val width: Int, val height: Int)
+
+  /**
+   * Size for the video surface, or null when a dimension is not known yet.
+   *
+   * [panscan] is mpv's 0..1 property: 0 fits the image inside the container
+   * (letterbox), 1 fills it (crop), values between interpolate the scale.
+   * [videoZoomLog2] is mpv's `video-zoom`, a log2 factor, applied on top.
+   */
+  fun sizeFor(
+    containerWidth: Int,
+    containerHeight: Int,
+    videoWidth: Int,
+    videoHeight: Int,
+    panscan: Float = 0f,
+    videoZoomLog2: Float = 0f
+  ): Size? {
+    if (containerWidth <= 0 || containerHeight <= 0 || videoWidth <= 0 || videoHeight <= 0) return null
+    val fit = min(containerWidth.toFloat() / videoWidth, containerHeight.toFloat() / videoHeight)
+    val cover = max(containerWidth.toFloat() / videoWidth, containerHeight.toFloat() / videoHeight)
+    val pan = panscan.coerceIn(0f, 1f)
+    val zoom = 2.0f.pow(videoZoomLog2.coerceIn(-MAX_ZOOM_LOG2, MAX_ZOOM_LOG2))
+    val scale = (fit + (cover - fit) * pan) * zoom
+    return Size(
+      width = (videoWidth * scale).toInt().coerceAtLeast(1),
+      height = (videoHeight * scale).toInt().coerceAtLeast(1)
+    )
+  }
+}
@@ -0,0 +1,86 @@
+package com.edde746.plezy.shared
+
+import android.accessibilityservice.AccessibilityServiceInfo
+import android.content.Context
+import android.os.Build
+import android.view.accessibility.AccessibilityManager
+
+/**
+ * Reports whether an enabled accessibility service can consume the app's semantics tree.
+ *
+ * Flutter compiles a semantics tree for every frame while [AccessibilityManager.isEnabled], which
+ * Android sets for any bound service. On TV that is routinely a utility that never reads app
+ * content (a launcher's foreground-app hook, a key remapper), so Dart gates the tree on this
+ * verdict. The verdict errs towards keeping the tree:
+ *
+ * - touch exploration is a screen reader, full stop;
+ * - an empty enabled list while accessibility is on means a [android.app.UiAutomation] client
+ *   (instrumentation, Maestro), which is not listed but reads the tree;
+ * - on API 33+ a service flagged `isAccessibilityTool`, or one giving spoken, braille, audible or
+ *   visual feedback, consumes; a non-tool with only generic/haptic feedback does not;
+ * - below 33 only a haptic-only service is treated as not consuming, since `feedbackGeneric` is
+ *   what Switch Access-style tools declare.
+ */
+class AssistiveTechnologyMonitor(context: Context) {
+  private val manager = context.getSystemService(Context.ACCESSIBILITY_SERVICE) as AccessibilityManager
+  private var onChanged: (() -> Unit)? = null
+  private val stateListener = AccessibilityManager.AccessibilityStateChangeListener { onChanged?.invoke() }
+  private val touchExplorationListener =
+    AccessibilityManager.TouchExplorationStateChangeListener { onChanged?.invoke() }
+  private var servicesListener: AccessibilityManager.AccessibilityServicesStateChangeListener? = null
+
+  fun start(onChanged: () -> Unit) {
+    if (this.onChanged != null) return
+    this.onChanged = onChanged
+    manager.addAccessibilityStateChangeListener(stateListener)
+    manager.addTouchExplorationStateChangeListener(touchExplorationListener)
+    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.TIRAMISU) {
+      val listener = AccessibilityManager.AccessibilityServicesStateChangeListener { onChanged() }
+      servicesListener = listener
+      manager.addAccessibilityServicesStateChangeListener(listener)
+    }
+  }
+
+  fun release() {
+    if (onChanged == null) return
+    onChanged = null
+    manager.removeAccessibilityStateChangeListener(stateListener)
+    manager.removeTouchExplorationStateChangeListener(touchExplorationListener)
+    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.TIRAMISU) {
+      servicesListener?.let { manager.removeAccessibilityServicesStateChangeListener(it) }
+      servicesListener = null
+    }
+  }
+
+  fun signals(): Map<String, Any> {
+    val services = manager.getEnabledAccessibilityServiceList(AccessibilityServiceInfo.FEEDBACK_ALL_MASK)
+    return mapOf(
+      "accessibilityEnabled" to manager.isEnabled,
+      "touchExplorationEnabled" to manager.isTouchExplorationEnabled,
+      "enabledServiceCount" to services.size,
+      "consumesSemantics" to consumesSemantics(services)
+    )
+  }
+
+  private fun consumesSemantics(services: List<AccessibilityServiceInfo>): Boolean {
+    if (manager.isTouchExplorationEnabled) return true
+    if (services.isEmpty()) return true
+    return services.any { info -> consumesSemantics(info) }
+  }
+
+  private fun consumesSemantics(info: AccessibilityServiceInfo): Boolean {
+    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.TIRAMISU) {
+      if (info.isAccessibilityTool) return true
+      return info.feedbackType and READER_FEEDBACK != 0
+    }
+    return info.feedbackType and AccessibilityServiceInfo.FEEDBACK_HAPTIC.inv() != 0
+  }
+
+  private companion object {
+    const val READER_FEEDBACK =
+      AccessibilityServiceInfo.FEEDBACK_SPOKEN or
+        AccessibilityServiceInfo.FEEDBACK_BRAILLE or
+        AccessibilityServiceInfo.FEEDBACK_AUDIBLE or
+        AccessibilityServiceInfo.FEEDBACK_VISUAL
+  }
+}
@@ -19,6 +19,15 @@ class FrameRateManager(
    private const val TAG = "FrameRateManager"
    private const val DISPLAY_SETTLE_MS = 2000L
    private const val WATCHDOG_MARGIN_MS = 3000L
+
+    // How long to let the HDR-exit commit land before restoring the refresh
+    // rate. Restoring while the display is still signaling HDR folds the
+    // HDR-exit and the mode change into one HDMI renegotiation, which some
+    // sink chains take 8-30 s to complete (#2172); sequenced, the HDR
+    // infoframe clear is free and the SDR mode switch takes ~1 s. The
+    // player's surface teardown commits the HDR exit within ~50 ms of
+    // dispose, so 400 ms covers it with margin even on a busy main thread.
+    private const val HDR_EXIT_SETTLE_MS = 400L
  }

  private var currentVideoFps: Float = 0f
@@ -30,6 +39,12 @@ class FrameRateManager(
  private var watchdogRunnable: Runnable? = null
  private var pendingCompletion: ((switched: Boolean) -> Unit)? = null

+  // Owns the deferred HDR-exit restore. Deliberately NOT the shared player
+  // [handler]: core dispose clears that one wholesale, and the restore must
+  // survive player disposal or the display stays at the content rate.
+  private val restoreHandler = Handler(android.os.Looper.getMainLooper())
+  private var pendingRestoreRunnable: Runnable? = null
+
  private fun getDisplayManager(): DisplayManager = activity.getSystemService(Context.DISPLAY_SERVICE) as DisplayManager

  // Request a display mode switch for the video's frame rate and/or, with
@@ -54,6 +69,9 @@ class FrameRateManager(
    matchResolution: Boolean = false,
    onComplete: (switched: Boolean) -> Unit
  ) {
+    // A new session's switch must not be clobbered by a still-pending
+    // deferred restore from the previous session's teardown.
+    cancelPendingRestore()
    currentVideoFps = fps
    currentVideoWidth = videoWidth
    currentVideoHeight = videoHeight
@@ -78,21 +96,47 @@ class FrameRateManager(
    }
  }

-  fun clearVideoFrameRate() {
-    Log.d(TAG, "clearVideoFrameRate")
+  // [hdrActive]: the session was outputting HDR. The restore is then deferred
+  // by [HDR_EXIT_SETTLE_MS] so the caller's surface teardown can commit the
+  // HDR exit first — see [HDR_EXIT_SETTLE_MS] for why stacking them is slow.
+  fun clearVideoFrameRate(hdrActive: Boolean = false) {
+    Log.d(TAG, "clearVideoFrameRate(hdrActive=$hdrActive)")
    currentVideoFps = 0f
    // Resolve any pending setVideoFrameRate future as "not switched" so
    // the Dart caller's await doesn't hang on player dispose.
    firePendingCompletion("clear", switched = false)
-    // Restore default display mode on API M (preferredDisplayModeId persists)
-    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.M) {
-      activity.window?.attributes?.let { attrs ->
-        attrs.preferredDisplayModeId = 0
-        activity.window?.attributes = attrs
+    cancelPendingRestore()
+    if (Build.VERSION.SDK_INT < Build.VERSION_CODES.M) return
+    // Nothing to restore when no preferred mode was ever applied.
+    if ((activity.window?.attributes?.preferredDisplayModeId ?: 0) == 0) return
+    if (hdrActive) {
+      val restore = Runnable {
+        pendingRestoreRunnable = null
+        // Log.d, not [log]: this fires after core dispose, when the
+        // Flutter-channel logger is already gone.
+        Log.d(TAG, "restoring default display mode after HDR exit")
+        restorePreferredDisplayMode()
      }
+      pendingRestoreRunnable = restore
+      restoreHandler.postDelayed(restore, HDR_EXIT_SETTLE_MS)
+    } else {
+      restorePreferredDisplayMode()
    }
  }

+  private fun restorePreferredDisplayMode() {
+    // preferredDisplayModeId persists on the window; restore the default.
+    activity.window?.attributes?.let { attrs ->
+      attrs.preferredDisplayModeId = 0
+      activity.window?.attributes = attrs
+    }
+  }
+
+  private fun cancelPendingRestore() {
+    pendingRestoreRunnable?.let { restoreHandler.removeCallbacks(it) }
+    pendingRestoreRunnable = null
+  }
+
  // Release pending callbacks/listener without restoring the display mode.
  // Used by player-core dispose paths so a backend handoff (e.g. ExoPlayer→MPV
  // audio fallback) doesn't clobber the just-applied refresh-rate switch —
@@ -7,6 +7,34 @@ import java.util.Locale

 /** Canonical decoder lookup and hardware classification for native playback. */
 internal object MediaCodecQuery {
+  /**
+   * Codecs whose advertised support is decided by hardware: both have a
+   * software decoder behind them, but a software HEVC or AV1 decode on
+   * phone/TV-class hardware drops frames.
+   */
+  private val HARDWARE_GATED_VIDEO_MIME_TYPES = mapOf(
+    "hevc" to "video/hevc",
+    "av1" to "video/av01"
+  )
+
+  /** Codec name -> whether this device has a hardware decoder for it. */
+  fun hardwareVideoDecodeSupport(
+    hardwareMimeTypes: Set<String> = hardwareDecoderMimeTypes()
+  ): Map<String, Boolean> = HARDWARE_GATED_VIDEO_MIME_TYPES.mapValues { (_, mimeType) -> mimeType in hardwareMimeTypes }
+
+  /**
+   * Every MIME type served by a hardware decoder, lowercased. One walk answers
+   * for all codecs, unlike [findHardwareDecoder], which rescans per lookup.
+   */
+  private fun hardwareDecoderMimeTypes(): Set<String> {
+    val mimeTypes = HashSet<String>()
+    for (info in MediaCodecList(MediaCodecList.REGULAR_CODECS).codecInfos) {
+      if (info.isEncoder || !isHardwareAccelerated(info)) continue
+      for (type in info.supportedTypes) mimeTypes.add(type.lowercase(Locale.ROOT))
+    }
+    return mimeTypes
+  }
+
  fun findHardwareDecoder(
    mimeType: String,
    codecKind: Int = MediaCodecList.REGULAR_CODECS,
@@ -2,6 +2,7 @@ package com.edde746.plezy.shared

 import android.app.Activity
 import android.graphics.Color
+import android.graphics.PixelFormat
 import android.view.SurfaceHolder
 import android.view.SurfaceView
 import android.view.ViewGroup
@@ -14,8 +15,37 @@ internal object PlayerSurfaceHost {
      ViewGroup.LayoutParams.MATCH_PARENT,
      ViewGroup.LayoutParams.MATCH_PARENT
    )
+    // Fallback fill for the frames before the punch surface below is placed.
    setBackgroundColor(Color.BLACK)
    this.clipChildren = clipChildren
+    addView(createLetterboxPunchSurface(activity))
+  }
+
+  /**
+   * Fullscreen, buffer-less SurfaceView kept beneath the video surface.
+   *
+   * Its only job is taking the letterbox area off the app-window (graphics)
+   * plane: like any below-window SurfaceView it punches the parent canvas and
+   * registers its rect as a window transparent region, so the pixels around
+   * the video rect scan out as the SurfaceFlinger backdrop instead of
+   * window-plane black. Several TV compositors (Fire TV Stick 4K Max, some
+   * Sony/Philips models) raise SDR graphics-plane black while the display is
+   * in HDR/Dolby Vision mode, which shows as gray letterbox bars on OLED
+   * panels (issue #2163; same mechanism as ExoPlayer #8803 and Kodi #25300).
+   *
+   * No buffer is ever posted to it: SurfaceFlinger skips buffer-less layers,
+   * and drawing black into it would put the bars back onto an SDR layer —
+   * exactly the plane being avoided. Views drawn on the parent canvas after
+   * the punch (Media3 subtitle cues) still re-claim their own bounds.
+   */
+  private fun createLetterboxPunchSurface(activity: Activity): SurfaceView = SurfaceView(activity).apply {
+    layoutParams = FrameLayout.LayoutParams(
+      FrameLayout.LayoutParams.MATCH_PARENT,
+      FrameLayout.LayoutParams.MATCH_PARENT
+    )
+    setZOrderOnTop(false)
+    setZOrderMediaOverlay(false)
+    FlutterOverlayHelper.applyCompositionOrder(this, -2)
  }

  fun createVideoSurface(activity: Activity, callback: SurfaceHolder.Callback): SurfaceView = SurfaceView(activity).apply {
@@ -29,6 +59,23 @@ internal object PlayerSurfaceHost {
    FlutterOverlayHelper.applyCompositionOrder(this, -2)
  }

+  /**
+   * Transparent plane directly above the video surface for the mpv
+   * `vo=mediacodec` subtitle/OSD output. Media-overlay z-order keeps it above
+   * the video SurfaceView but still beneath the Flutter window content.
+   */
+  fun createOsdSurface(activity: Activity, callback: SurfaceHolder.Callback): SurfaceView = SurfaceView(activity).apply {
+    layoutParams = FrameLayout.LayoutParams(
+      FrameLayout.LayoutParams.MATCH_PARENT,
+      FrameLayout.LayoutParams.MATCH_PARENT
+    )
+    holder.addCallback(callback)
+    holder.setFormat(PixelFormat.TRANSLUCENT)
+    setZOrderOnTop(false)
+    setZOrderMediaOverlay(true)
+    FlutterOverlayHelper.applyCompositionOrder(this, -1)
+  }
+
  fun attachToContent(activity: Activity, container: FrameLayout): ViewGroup {
    val contentView = activity.findViewById<ViewGroup>(android.R.id.content)
    contentView.addView(container, 0)
@@ -13,3 +13,8 @@ add_executable(ffmpeg_audio_buffer_test ffmpeg_audio_buffer_test.cpp)
 target_compile_features(ffmpeg_audio_buffer_test PRIVATE cxx_std_17)

 add_test(NAME ffmpeg_audio_buffer_test COMMAND ffmpeg_audio_buffer_test)
+
+add_executable(mpv_utf8_convert_test mpv_utf8_convert_test.cpp)
+target_compile_features(mpv_utf8_convert_test PRIVATE cxx_std_17)
+
+add_test(NAME mpv_utf8_convert_test COMMAND mpv_utf8_convert_test)
@@ -0,0 +1,59 @@
+#include <cstdio>
+#include <string>
+
+#include "../../../../libmpv/src/main/cpp/utf8_convert.h"
+
+namespace {
+
+using plezy::utf8::FromUtf16;
+using plezy::utf8::ToUtf16;
+
+bool check(bool condition, const char* message) {
+  if (!condition) std::fprintf(stderr, "%s\n", message);
+  return condition;
+}
+
+bool roundTripsAsciiBmpAndSupplementary() {
+  // "a" U+00E9 U+4E2D U+1F3AC (clapper board) — 1/2/3/4-byte sequences.
+  const std::string utf8 = "a\xC3\xA9\xE4\xB8\xAD\xF0\x9F\x8E\xAC";
+  const std::u16string utf16 = ToUtf16(utf8.c_str());
+  return check(utf16 == u"a\u00E9\u4E2D\U0001F3AC", "UTF-8 -> UTF-16 mismatch") &&
+         check(FromUtf16(utf16.data(), utf16.size()) == utf8, "UTF-16 -> UTF-8 mismatch");
+}
+
+bool doesNotEmitModifiedUtf8() {
+  // JNI's modified UTF-8 would encode U+1F3AC as a 6-byte CESU-8 surrogate
+  // pair; mpv/open() need the real 4-byte form.
+  const std::u16string clapper = u"\U0001F3AC";
+  return check(FromUtf16(clapper.data(), clapper.size()) == "\xF0\x9F\x8E\xAC", "supplementary char not 4 bytes") &&
+         check(
+             ToUtf16("\xED\xA0\xBC\xED\xBE\xAC") == u"\uFFFD\uFFFD\uFFFD\uFFFD\uFFFD\uFFFD",
+             "CESU-8 surrogate bytes accepted as UTF-8");
+}
+
+bool replacesMalformedBytesOneAtATime() {
+  return check(ToUtf16("ok\xFF\xFEz") == u"ok\uFFFD\uFFFDz", "stray bytes not replaced individually") &&
+         check(ToUtf16("\xC0\x80") == u"\uFFFD\uFFFD", "overlong NUL accepted") &&
+         check(ToUtf16("\xE2\x82") == u"\uFFFD\uFFFD", "truncated sequence not replaced") &&
+         check(ToUtf16("\xF4\x90\x80\x80") == u"\uFFFD\uFFFD\uFFFD\uFFFD", "code point above U+10FFFF accepted") &&
+         check(ToUtf16("\xE0\x80\xAF") == u"\uFFFD\uFFFD\uFFFD", "overlong 3-byte form accepted");
+}
+
+bool replacesLoneSurrogates() {
+  const std::u16string lone = u"x\xD83Cy\xDFACz";
+  return check(FromUtf16(lone.data(), lone.size()) == "x\xEF\xBF\xBDy\xEF\xBF\xBDz", "lone surrogates not replaced");
+}
+
+bool handlesNullAndEmpty() {
+  return check(ToUtf16(nullptr).empty(), "NULL input not empty") &&
+         check(ToUtf16("").empty(), "empty input not empty") &&
+         check(FromUtf16(nullptr, 0).empty(), "NULL UTF-16 not empty");
+}
+
+}  // namespace
+
+int main() {
+  const bool ok = roundTripsAsciiBmpAndSupplementary() && doesNotEmitModifiedUtf8() &&
+                  replacesMalformedBytesOneAtATime() && replacesLoneSurrogates() && handlesNullAndEmpty();
+  return ok ? 0 : 1;
+}
@@ -2,8 +2,10 @@ package com.edde746.plezy

 import android.app.Activity
 import android.content.Intent
+import android.net.Uri
 import io.flutter.plugin.common.MethodChannel
 import org.junit.Assert.assertEquals
+import org.junit.Assert.assertFalse
 import org.junit.Assert.assertTrue
 import org.junit.Test
 import org.junit.runner.RunWith
@@ -30,6 +32,40 @@ class ExternalPlayerChannelTest {
    assertEquals(false, result["playbackError"])
  }

+  @Test
+  fun freshLaunchTellsPlayerToStartFromBeginning() {
+    val activity = Robolectric.buildActivity(Activity::class.java).get()
+    val channel = ExternalPlayerChannel(activity)
+    val source = ExternalPlayerChannel.Source(
+      Uri.parse("http://plex:32400/library/parts/9808/1775431760/file.mkv?X-Plex-Token=tok"),
+      grantRead = false,
+      fileName = "file.mkv"
+    )
+
+    val intent = channel.buildIntent(source, packageName = null, startPositionMs = 0L, title = "Episode")
+
+    assertTrue(intent.getBooleanExtra("from_start", false))
+    assertFalse(intent.hasExtra("position"))
+    assertFalse(intent.hasExtra("startfrom"))
+  }
+
+  @Test
+  fun resumeLaunchPassesPositionAndDisablesFromStart() {
+    val activity = Robolectric.buildActivity(Activity::class.java).get()
+    val channel = ExternalPlayerChannel(activity)
+    val source = ExternalPlayerChannel.Source(
+      Uri.parse("http://plex:32400/library/parts/9808/1775431760/file.mkv?X-Plex-Token=tok"),
+      grantRead = false,
+      fileName = "file.mkv"
+    )
+
+    val intent = channel.buildIntent(source, packageName = null, startPositionMs = 90_000L, title = null)
+
+    assertFalse(intent.getBooleanExtra("from_start", true))
+    assertEquals(90_000, intent.getIntExtra("position", -1))
+    assertEquals(90_000, intent.getIntExtra("startfrom", -1))
+  }
+
  @Test
  fun activityDestroyCompletesPendingChannelCall() {
    val activity = Robolectric.buildActivity(Activity::class.java).get()
@@ -94,24 +94,111 @@ class AudioOutputPolicyTest {
  }

  @Test
-  fun spdifListNamesOnlyCodecsMpvsStereoIecTrackCanCarry() {
-    // eac3 (a 192kHz burst), truehd and dts-hd (192kHz/8ch) never survive mpv's audiotrack
-    // AO, which opens every spdif format as a stereo IEC 61937 track at the mixer rate;
-    // naming them strands playback on a dead audio output (#1991).
-    assertEquals("ac3,dts", mpvSpdifCodecs { true })
+  fun spdifListNamesEveryCodecARouteWithAllShapesCanCarry() {
+    // libmpv v1.1.0's audiotrack AO opens each burst at its own rate and channel mask, so a route
+    // that takes all three shapes and advertises everything bitstreams the lossless codecs too.
+    // `dts-hd` supersedes plain `dts`: ad_spdif picks the core burst per file for non-HD tracks.
+    assertEquals("ac3,eac3,truehd,dts-hd", spdifCodecs(allEncodings, allShapes))
+  }
+
+  @Test
+  fun spdifListOnAStereo48kOnlyRouteNamesTheCoreCodecsOnly() {
+    // E-AC3 (192kHz), TrueHD MAT and DTS-HD MA (192kHz/8ch) have no track to ride here.
+    assertEquals("ac3,dts", spdifCodecs(allEncodings, setOf(MpvIecShape.STEREO_48K)))
+  }
+
+  @Test
+  fun dtsHdFallsBackToThePlainCoreWithoutTheCarrierShape() {
+    // Advertising ENCODING_DTS_HD says the receiver decodes it, not that the route takes the
+    // 192kHz/8ch track its burst needs (#1988); naming `dts-hd` anyway strands playback.
+    assertEquals(
+      "dts",
+      spdifCodecs(setOf(C.ENCODING_DTS, C.ENCODING_DTS_HD), setOf(MpvIecShape.STEREO_48K))
+    )
+  }
+
+  @Test
+  fun eac3IsNotNamedWithoutThe192kStereoShape() {
+    assertEquals("", spdifCodecs(setOf(C.ENCODING_E_AC3), setOf(MpvIecShape.STEREO_48K)))
+  }
+
+  @Test
+  fun trueHdIsNotNamedWithoutTheCarrierShape() {
+    assertEquals(
+      "",
+      spdifCodecs(
+        setOf(C.ENCODING_DOLBY_TRUEHD),
+        setOf(MpvIecShape.STEREO_48K, MpvIecShape.STEREO_192K)
+      )
+    )
+  }
+
+  @Test
+  fun plainDtsSurvivesWhenTheRouteDoesNotAdvertiseDtsHd() {
+    // The core burst is stereo/48k, so it rides a full-shape route unchanged when only the
+    // lossless encoding is missing.
+    assertEquals("dts", spdifCodecs(setOf(C.ENCODING_DTS), allShapes))
  }

  @Test
  fun spdifListDropsCodecsTheRouteCannotBitstream() {
-    // Google TV Streamer over HDMI to a Dolby-only sink: AC3 bitstreams, DTS does not (#1703).
+    // Google TV Streamer over HDMI to a Dolby-only sink: AC3/E-AC3 bitstream, DTS does not (#1703).
    val dolbyOnlyRoute = setOf(C.ENCODING_AC3, C.ENCODING_E_AC3)

-    assertEquals("ac3", mpvSpdifCodecs { encoding -> encoding in dolbyOnlyRoute })
+    assertEquals("ac3,eac3", spdifCodecs(dolbyOnlyRoute, allShapes))
  }

  @Test
  fun spdifListIsEmptyForPcmOnlyRoutes() {
-    assertEquals("", mpvSpdifCodecs { false })
+    assertEquals("", mpvSpdifCodecs({ false }, { false }))
+  }
+
+  @Test
+  fun spdifListIsEmptyWhenTheRouteTakesNoIecTrackAtAll() {
+    // Every encoding advertised, but no raw track and no IEC 61937 shape opens: mpv has no
+    // decode fallback for a named codec, so nothing may be named (#1991).
+    assertEquals("", spdifCodecs(allEncodings, emptySet()))
+  }
+
+  @Test
+  fun rawCapableRouteBitstreamsTheCoreCodecsWithoutAnyIecShape() {
+    // #2177's Shield: every mpv IEC track opens and drains into silence, while raw
+    // ENCODING_AC3/E_AC3/DTS tracks (the ExoPlayer transport) play. The AO opens raw first,
+    // so raw support alone must qualify the core codecs.
+    assertEquals(
+      "ac3,eac3,dts",
+      spdifCodecs(allEncodings, emptySet(), raw = setOf(C.ENCODING_AC3, C.ENCODING_E_AC3, C.ENCODING_DTS))
+    )
+  }
+
+  @Test
+  fun rawSupportNeverQualifiesTheLosslessCodecs() {
+    // TrueHD and DTS-HD MA have no raw transport in the AO; they ride the 192kHz/7.1 IEC
+    // carrier or decode. A route that takes every raw track but no carrier must not name them.
+    assertEquals("ac3,eac3,dts", spdifCodecs(allEncodings, emptySet(), raw = allEncodings))
+  }
+
+  @Test
+  fun rawProbeIsOnlyConsultedForRawCandidates() {
+    // The raw probe costs real route calls; the carrier-only codecs must never trigger it.
+    val codecs = mpvSpdifCodecs(
+      { true },
+      { true },
+      { encoding ->
+        if (encoding == C.ENCODING_DOLBY_TRUEHD || encoding == C.ENCODING_DTS_HD) {
+          throw AssertionError("raw probe consulted for a carrier-only codec")
+        }
+        true
+      }
+    )
+    assertEquals("ac3,eac3,truehd,dts-hd", codecs)
+  }
+
+  @Test
+  fun dtsHdStillSupersedesPlainDtsWhenDtsBitstreamsRaw() {
+    // dts-hd selects the lossless spdif decoder for the whole dts codec; the raw core track
+    // must not resurrect the plain name beside it.
+    assertEquals("ac3,eac3,truehd,dts-hd", spdifCodecs(allEncodings, allShapes, raw = allEncodings))
  }

  @Test
@@ -204,4 +291,17 @@ class AudioOutputPolicyTest {
      )
    }
  }
+
+  /** Every encoding the spdif table can ask for, i.e. a receiver that decodes all of them. */
+  private val allEncodings = setOf(
+    C.ENCODING_AC3,
+    C.ENCODING_E_AC3,
+    C.ENCODING_DOLBY_TRUEHD,
+    C.ENCODING_DTS,
+    C.ENCODING_DTS_HD
+  )
+
+  private val allShapes = MpvIecShape.values().toSet()
+
+  private fun spdifCodecs(encodings: Set<Int>, shapes: Set<MpvIecShape>, raw: Set<Int> = emptySet()): String = mpvSpdifCodecs({ it in encodings }, { it in shapes }, { it in raw })
 }
@@ -1,41 +0,0 @@
-package com.edde746.plezy.exoplayer
-
-import org.junit.Assert.assertEquals
-import org.junit.Assert.assertNull
-import org.junit.Test
-
-class DoviCodecsTest {
-  @Test
-  fun hevcProfilesUseDvhePrefix() {
-    // Profile 8 level 6 is the stream from #2096: the record's dv_profile and
-    // dv_level bytes must surface verbatim, matching media3's
-    // DolbyVisionConfig output for the same file (dvhe.08.06).
-    assertEquals("dvhe.08.06", DoviCodecs.rfc6381(8, 6))
-    assertEquals("dvhe.04.09", DoviCodecs.rfc6381(4, 9))
-    assertEquals("dvhe.05.06", DoviCodecs.rfc6381(5, 6))
-    // Profile 7 keys DoviConvertingTrackOutput's P7 conversion.
-    assertEquals("dvhe.07.06", DoviCodecs.rfc6381(7, 6))
-  }
-
-  @Test
-  fun avcAndAv1ProfilesUseTheirOwnPrefixes() {
-    assertEquals("dvav.09.05", DoviCodecs.rfc6381(9, 5))
-    assertEquals("dav1.10.04", DoviCodecs.rfc6381(10, 4))
-  }
-
-  @Test
-  fun twoDigitLevelsAreNotZeroPadded() {
-    assertEquals("dvhe.08.10", DoviCodecs.rfc6381(8, 10))
-  }
-
-  @Test
-  fun unrecognizedProfilesReturnNullSoTheBaseCodecFormatSurvives() {
-    // Media3's DolbyVisionConfig table: anything it rejects must keep the
-    // track's plain HEVC/AVC format instead of publishing an unplayable
-    // video/dolby-vision variant.
-    assertNull(DoviCodecs.rfc6381(0, 6))
-    assertNull(DoviCodecs.rfc6381(2, 6))
-    assertNull(DoviCodecs.rfc6381(6, 6))
-    assertNull(DoviCodecs.rfc6381(20, 6))
-  }
-}
@@ -1,137 +0,0 @@
-package com.edde746.plezy.exoplayer
-
-import androidx.media3.common.MimeTypes
-import androidx.media3.common.ParserException
-import java.nio.ByteBuffer
-import java.nio.ByteOrder
-import org.junit.Assert.assertArrayEquals
-import org.junit.Assert.assertEquals
-import org.junit.Assert.assertSame
-import org.junit.Assert.assertThrows
-import org.junit.Test
-
-/**
- * Spec for the per-codec initializationData shapes the ffmpeg demuxer must
- * publish so MediaCodec csd-0/1/2 and FfmpegAudioDecoder's extradata
- * reconstruction both see what media3's own extractors emit. Regression
- * coverage for #2088: Opus with a bare OpusHead csd made Android's decoders
- * eat the first two real packets as configuration and discard all output.
- */
-class FfmpegAudioCsdTest {
-
-  private fun opusHead(preSkip: Int): ByteArray {
-    val header = ByteArray(19)
-    "OpusHead".toByteArray(Charsets.US_ASCII).copyInto(header)
-    header[8] = 1 // version
-    header[9] = 2 // channel count
-    header[10] = (preSkip and 0xFF).toByte()
-    header[11] = (preSkip ushr 8).toByte()
-    return header
-  }
-
-  private fun nativeOrderLong(bytes: ByteArray): Long = ByteBuffer.wrap(bytes).order(ByteOrder.nativeOrder()).long
-
-  @Test
-  fun opusBuildsThreeCsdBuffers() {
-    val header = opusHead(preSkip = 312)
-    val csd = FfmpegAudioCsd.initializationData(MimeTypes.AUDIO_OPUS, header)
-    assertEquals(3, csd.size)
-    assertArrayEquals(header, csd[0])
-    // Pre-skip converted to nanoseconds at the Opus 48 kHz clock.
-    assertEquals(312L * 1_000_000_000L / 48_000L, nativeOrderLong(csd[1]))
-    // media3's default seek pre-roll: 3840 samples = 80 ms.
-    assertEquals(80_000_000L, nativeOrderLong(csd[2]))
-  }
-
-  @Test
-  fun opusRejectsTruncatedHeader() {
-    assertThrows(ParserException::class.java) {
-      FfmpegAudioCsd.initializationData(MimeTypes.AUDIO_OPUS, ByteArray(11))
-    }
-  }
-
-  private fun xiphLace(length: Int): ByteArray {
-    val bytes = ArrayList<Byte>()
-    var remaining = length
-    while (remaining >= 0xFF) {
-      bytes.add(0xFF.toByte())
-      remaining -= 0xFF
-    }
-    bytes.add(remaining.toByte())
-    return bytes.toByteArray()
-  }
-
-  private fun vorbisHeader(type: Int, payloadLength: Int): ByteArray = byteArrayOf(type.toByte()) + "vorbis".toByteArray(Charsets.US_ASCII) + ByteArray(payloadLength)
-
-  @Test
-  fun vorbisSplitsLacedHeadersIntoIdentificationAndSetup() {
-    val id = vorbisHeader(0x01, payloadLength = 23) // 30 bytes, the real identification header size
-    val comment = vorbisHeader(0x03, payloadLength = 300) // > 255 exercises the 0xFF lacing
-    val setup = vorbisHeader(0x05, payloadLength = 40)
-    val extradata = byteArrayOf(0x02) + xiphLace(id.size) + xiphLace(comment.size) + id + comment + setup
-
-    val csd = FfmpegAudioCsd.initializationData(MimeTypes.AUDIO_VORBIS, extradata)
-
-    assertEquals(2, csd.size)
-    assertArrayEquals(id, csd[0])
-    assertArrayEquals(setup, csd[1])
-  }
-
-  @Test
-  fun vorbisRejectsNonLacedExtradata() {
-    assertThrows(ParserException::class.java) {
-      FfmpegAudioCsd.initializationData(MimeTypes.AUDIO_VORBIS, byteArrayOf(0x01, 0x02, 0x03))
-    }
-  }
-
-  @Test
-  fun vorbisRejectsTruncatedExtradata() {
-    val id = vorbisHeader(0x01, payloadLength = 23)
-    val truncated = byteArrayOf(0x02) + xiphLace(id.size) + xiphLace(64) + id // headers end early
-    assertThrows(ParserException::class.java) {
-      FfmpegAudioCsd.initializationData(MimeTypes.AUDIO_VORBIS, truncated)
-    }
-  }
-
-  @Test
-  fun flacWrapsBareStreamInfoInMarkedStream() {
-    val streamInfo = ByteArray(34) { it.toByte() }
-    val csd = FfmpegAudioCsd.initializationData(MimeTypes.AUDIO_FLAC, streamInfo)
-    assertEquals(1, csd.size)
-    assertArrayEquals(
-      "fLaC".toByteArray(Charsets.US_ASCII) + byteArrayOf(0x80.toByte(), 0x00, 0x00, 34) + streamInfo,
-      csd[0]
-    )
-  }
-
-  @Test
-  fun flacPrependsMarkerToBlockHeadedStreamInfo() {
-    val block = byteArrayOf(0x00, 0x00, 0x00, 34) + ByteArray(34) { it.toByte() }
-    val csd = FfmpegAudioCsd.initializationData(MimeTypes.AUDIO_FLAC, block)
-    assertEquals(1, csd.size)
-    assertArrayEquals("fLaC".toByteArray(Charsets.US_ASCII) + block, csd[0])
-  }
-
-  @Test
-  fun flacKeepsMarkedStreamVerbatim() {
-    val marked = "fLaC".toByteArray(Charsets.US_ASCII) + byteArrayOf(0x80.toByte(), 0x00, 0x00, 34) + ByteArray(34)
-    val csd = FfmpegAudioCsd.initializationData(MimeTypes.AUDIO_FLAC, marked)
-    assertEquals(1, csd.size)
-    assertSame(marked, csd[0])
-  }
-
-  @Test
-  fun flacRejectsUnrecognizedExtradata() {
-    assertThrows(ParserException::class.java) {
-      FfmpegAudioCsd.initializationData(MimeTypes.AUDIO_FLAC, ByteArray(10))
-    }
-  }
-
-  @Test
-  fun otherCodecsPassExtradataThroughAsSingleEntry() {
-    val asc = byteArrayOf(0x12, 0x10) // AAC-LC 44.1 kHz stereo AudioSpecificConfig
-    val csd = FfmpegAudioCsd.initializationData(MimeTypes.AUDIO_AAC, asc)
-    assertEquals(1, csd.size)
-    assertSame(asc, csd[0])
-  }
-}
@@ -1,29 +0,0 @@
-package com.edde746.plezy.exoplayer
-
-import org.junit.Assert.assertEquals
-import org.junit.Assert.assertFalse
-import org.junit.Assert.assertTrue
-import org.junit.Test
-
-class FfmpegDemuxerPolicyTest {
-  @Test
-  fun wireValuesRoundTrip() {
-    assertEquals(FfmpegDemuxerPolicy.Preference.FFMPEG, FfmpegDemuxerPolicy.fromWire("ffmpeg"))
-    assertEquals(FfmpegDemuxerPolicy.Preference.MEDIA3_ONLY, FfmpegDemuxerPolicy.fromWire("media3"))
-  }
-
-  @Test
-  fun unknownWireValuesResolveToFfmpeg() {
-    assertEquals(FfmpegDemuxerPolicy.Preference.FFMPEG, FfmpegDemuxerPolicy.fromWire(null))
-    assertEquals(FfmpegDemuxerPolicy.Preference.FFMPEG, FfmpegDemuxerPolicy.fromWire(""))
-    assertEquals(FfmpegDemuxerPolicy.Preference.FFMPEG, FfmpegDemuxerPolicy.fromWire("bogus"))
-    // Retired wire value from the container-list era maps to the default.
-    assertEquals(FfmpegDemuxerPolicy.Preference.FFMPEG, FfmpegDemuxerPolicy.fromWire("auto"))
-  }
-
-  @Test
-  fun ffmpegDemuxesByDefaultAndMedia3OnlyDisables() {
-    assertTrue(FfmpegDemuxerPolicy.enabled(FfmpegDemuxerPolicy.Preference.FFMPEG))
-    assertFalse(FfmpegDemuxerPolicy.enabled(FfmpegDemuxerPolicy.Preference.MEDIA3_ONLY))
-  }
-}
@@ -1,222 +0,0 @@
-package com.edde746.plezy.exoplayer
-
-import android.net.Uri
-import androidx.media3.common.C
-import androidx.media3.datasource.DataSource
-import androidx.media3.datasource.DataSpec
-import androidx.media3.datasource.TransferListener
-import java.io.IOException
-import org.junit.Assert.assertArrayEquals
-import org.junit.Assert.assertEquals
-import org.junit.Assert.assertFalse
-import org.junit.Assert.assertNull
-import org.junit.Assert.assertSame
-import org.junit.Assert.assertThrows
-import org.junit.Assert.assertTrue
-import org.junit.Test
-import org.junit.runner.RunWith
-import org.robolectric.RobolectricTestRunner
-
-/**
- * The demuxer's correctness now rests on this source answering any absolute
- * position, so these pin the contract libavformat depends on: a read lands on
- * the requested byte, a backward jump reopens rather than returning the wrong
- * bytes, and sequential reads do not reopen (which would turn steady-state
- * playback into one request per 64 KB).
- */
-@RunWith(RobolectricTestRunner::class)
-class FfmpegRandomAccessSourceTest {
-
-  private val content = ByteArray(4096) { (it % 251).toByte() }
-  private val uri: Uri = Uri.parse("https://example.test/movie.mkv")
-
-  private class FakeDataSource(private val content: ByteArray) : DataSource {
-    var openedAt: Long = -1
-    var closed = false
-    private var position = 0
-
-    override fun open(dataSpec: DataSpec): Long {
-      openedAt = dataSpec.position
-      position = dataSpec.position.toInt()
-      return (content.size - position).toLong()
-    }
-
-    override fun read(buffer: ByteArray, offset: Int, length: Int): Int {
-      if (position >= content.size) return C.RESULT_END_OF_INPUT
-      val count = minOf(length, content.size - position)
-      content.copyInto(buffer, offset, position, position + count)
-      position += count
-      return count
-    }
-
-    override fun addTransferListener(transferListener: TransferListener) = Unit
-
-    override fun getUri(): Uri? = null
-
-    override fun getResponseHeaders(): Map<String, List<String>> = emptyMap()
-
-    override fun close() {
-      closed = true
-    }
-  }
-
-  private inner class FakeFactory : DataSource.Factory {
-    val created = mutableListOf<FakeDataSource>()
-
-    override fun createDataSource(): DataSource = FakeDataSource(content).also { created.add(it) }
-  }
-
-  private fun sourceFor(factory: DataSource.Factory, spec: DataSpec? = DataSpec(uri)) = FfmpegRandomAccessSource(factory) { spec }
-
-  @Test
-  fun readsLandOnTheRequestedAbsolutePosition() {
-    val factory = FakeFactory()
-    val source = sourceFor(factory)
-    val buffer = ByteArray(16)
-
-    assertEquals(16, source.readAt(1000, buffer, 16))
-
-    assertArrayEquals(content.copyOfRange(1000, 1016), buffer)
-    assertEquals(1000L, factory.created.single().openedAt)
-  }
-
-  @Test
-  fun sequentialReadsReuseOneHandle() {
-    val factory = FakeFactory()
-    val source = sourceFor(factory)
-    val buffer = ByteArray(64)
-
-    source.readAt(0, buffer, 64)
-    source.readAt(64, buffer, 64)
-    source.readAt(128, buffer, 64)
-
-    assertEquals(1, source.openCount)
-    assertArrayEquals(content.copyOfRange(128, 192), buffer)
-  }
-
-  @Test
-  fun backwardJumpReopensAndReturnsTheRequestedBytes() {
-    val factory = FakeFactory()
-    val source = sourceFor(factory)
-    val buffer = ByteArray(32)
-
-    source.readAt(2048, buffer, 32)
-    // The jump libavformat makes for an index at the end of the file, then back.
-    assertEquals(32, source.readAt(16, buffer, 32))
-
-    assertArrayEquals(content.copyOfRange(16, 48), buffer)
-    assertEquals(2, source.openCount)
-    assertTrue("abandoned handle must be closed", factory.created.first().closed)
-  }
-
-  @Test
-  fun endOfInputReportsZeroWithoutAdvancing() {
-    val factory = FakeFactory()
-    val source = sourceFor(factory)
-    val buffer = ByteArray(8)
-
-    assertEquals(0, source.readAt(content.size.toLong(), buffer, 8))
-  }
-
-  @Test
-  fun lengthResolvesFromAnOpenAndStaysKnown() {
-    val factory = FakeFactory()
-    val source = sourceFor(factory)
-
-    assertEquals(C.LENGTH_UNSET.toLong(), source.length())
-    source.readAt(512, ByteArray(8), 8)
-
-    assertEquals(content.size.toLong(), source.length())
-  }
-
-  @Test
-  fun clonedSpecKeepsCacheKeyAndFlagsButTakesOurPosition() {
-    val recorded = DataSpec.Builder()
-      .setUri(uri)
-      .setPosition(9999)
-      .setLength(1234)
-      .setKey("download-cache-key")
-      .setFlags(DataSpec.FLAG_ALLOW_CACHE_FRAGMENTATION)
-      .setHttpRequestHeaders(mapOf("X-Test" to "1"))
-      .build()
-    var openedSpec: DataSpec? = null
-    val factory = DataSource.Factory {
-      object : DataSource {
-        override fun open(dataSpec: DataSpec): Long {
-          openedSpec = dataSpec
-          return C.LENGTH_UNSET.toLong()
-        }
-
-        override fun read(buffer: ByteArray, offset: Int, length: Int): Int = C.RESULT_END_OF_INPUT
-
-        override fun addTransferListener(transferListener: TransferListener) = Unit
-
-        override fun getUri(): Uri? = null
-
-        override fun getResponseHeaders(): Map<String, List<String>> = emptyMap()
-
-        override fun close() = Unit
-      }
-    }
-
-    sourceFor(factory, recorded).readAt(4242, ByteArray(4), 4)
-
-    val spec = requireNotNull(openedSpec)
-    assertEquals(4242L, spec.position)
-    assertEquals(C.LENGTH_UNSET.toLong(), spec.length)
-    assertEquals("download-cache-key", spec.key)
-    assertEquals(DataSpec.FLAG_ALLOW_CACHE_FRAGMENTATION, spec.flags)
-    assertEquals("1", spec.httpRequestHeaders["X-Test"])
-    assertEquals(uri, spec.uri)
-  }
-
-  @Test
-  fun readWithoutARecordedSpecFails() {
-    val source = sourceFor(FakeFactory(), spec = null)
-
-    assertThrows(IOException::class.java) { source.readAt(0, ByteArray(4), 4) }
-  }
-
-  @Test
-  fun closeReleasesTheHandle() {
-    val factory = FakeFactory()
-    val source = sourceFor(factory)
-    source.readAt(0, ByteArray(4), 4)
-
-    assertTrue(source.isOpen)
-    source.close()
-
-    assertFalse(source.isOpen)
-    assertTrue(factory.created.single().closed)
-  }
-
-  @Test
-  fun recordingFactoryReportsTheSpecMedia3OpenedPerUri() {
-    val delegate = FakeFactory()
-    val recorder = RecordingDataSourceFactory(delegate)
-    val other = Uri.parse("https://example.test/next-episode.mkv")
-
-    assertNull(recorder.specFor(uri))
-    recorder.createDataSource().open(DataSpec.Builder().setUri(uri).setPosition(64).setKey("a").build())
-    recorder.createDataSource().open(DataSpec.Builder().setUri(other).setPosition(128).build())
-
-    // Preloading the next item must not redirect the current demuxer's reads.
-    assertEquals(64L, recorder.specFor(uri)?.position)
-    assertEquals("a", recorder.specFor(uri)?.key)
-    assertEquals(128L, recorder.specFor(other)?.position)
-  }
-
-  @Test
-  fun recordingFactoryDelegatesReads() {
-    val delegate = FakeFactory()
-    val recorder = RecordingDataSourceFactory(delegate)
-    val buffer = ByteArray(16)
-
-    val dataSource = recorder.createDataSource()
-    dataSource.open(DataSpec.Builder().setUri(uri).setPosition(32).build())
-    assertEquals(16, dataSource.read(buffer, 0, 16))
-
-    assertArrayEquals(content.copyOfRange(32, 48), buffer)
-    assertSame(delegate.created.single(), delegate.created.first())
-  }
-}
@@ -1,53 +0,0 @@
-package com.edde746.plezy.exoplayer
-
-import org.junit.Assert.assertEquals
-import org.junit.Test
-
-/**
- * Byte-exact spec for the media3-shaped subtitle sample prefixes. The shapes
- * mirror media3 1.11.0 MatroskaExtractor's SSA_PREFIX/SUBRIP_PREFIX/VTT_PREFIX
- * with the duration patched into the second timecode; SsaParser,
- * SubripParser, WebvttParser, and AssTrackOutput all parse these exact bytes.
- */
-class FfmpegSubtitleSamplesTest {
-
-  private fun string(bytes: ByteArray): String = bytes.toString(Charsets.UTF_8)
-
-  @Test
-  fun ssaPrefixMatchesMatroskaExtractorShape() {
-    // 1h 2m 3s 450ms -> centiseconds, ':' separator, single-digit hour.
-    assertEquals(
-      "Dialogue: 0:00:00:00,1:02:03:45,",
-      string(FfmpegSubtitleSamples.ssaPrefix(3_723_450_000L))
-    )
-    assertEquals("Dialogue: 0:00:00:00,0:00:05:00,", string(FfmpegSubtitleSamples.ssaPrefix(5_000_000L)))
-    // Sub-centisecond remainders truncate, matching integer division.
-    assertEquals("Dialogue: 0:00:00:00,0:00:00:99,", string(FfmpegSubtitleSamples.ssaPrefix(999_999L)))
-  }
-
-  @Test
-  fun subripPrefixIsACompleteCueHeader() {
-    assertEquals(
-      "1\n00:00:00,000 --> 01:02:03,450\n",
-      string(FfmpegSubtitleSamples.subripPrefix(3_723_450_000L))
-    )
-    assertEquals("1\n00:00:00,000 --> 00:00:05,000\n", string(FfmpegSubtitleSamples.subripPrefix(5_000_000L)))
-  }
-
-  @Test
-  fun vttPrefixIsAOneCueDocumentHeader() {
-    assertEquals(
-      "WEBVTT\n\n00:00:00.000 --> 01:02:03.450\n",
-      string(FfmpegSubtitleSamples.vttPrefix(3_723_450_000L))
-    )
-    assertEquals("WEBVTT\n\n00:00:00.000 --> 00:00:05.000\n", string(FfmpegSubtitleSamples.vttPrefix(5_000_000L)))
-  }
-
-  @Test
-  fun ssaDialogueFormatMatchesMedia3Constant() {
-    assertEquals(
-      "Format: Start, End, ReadOrder, Layer, Style, Name, MarginL, MarginR, MarginV, Effect, Text",
-      string(FfmpegSubtitleSamples.SSA_DIALOGUE_FORMAT)
-    )
-  }
-}
@@ -0,0 +1,154 @@
+package com.edde746.plezy.exoplayer
+
+import androidx.media3.common.C
+import androidx.media3.common.DataReader
+import androidx.media3.common.Format
+import androidx.media3.common.util.ParsableByteArray
+import androidx.media3.extractor.DefaultExtractorInput
+import androidx.media3.extractor.Extractor
+import androidx.media3.extractor.ExtractorInput
+import androidx.media3.extractor.ExtractorOutput
+import androidx.media3.extractor.PositionHolder
+import androidx.media3.extractor.SeekMap
+import androidx.media3.extractor.TrackOutput
+import com.edde746.plezy.libass.media.AssHandler
+import com.edde746.plezy.libass.media.parser.AssSubtitleParserFactory
+import org.junit.Assert.assertEquals
+import org.junit.Assert.assertNotNull
+import org.junit.Assert.assertTrue
+import org.junit.Test
+import org.junit.runner.RunWith
+import org.robolectric.RobolectricTestRunner
+import org.robolectric.annotation.Config
+
+/** Regression coverage for Matroska files whose SeekHead references Tracks after the Clusters. */
+@RunWith(RobolectricTestRunner::class)
+@Config(sdk = [34])
+class MatroskaLateTracksTest {
+
+  private class CapturedTrack(val type: Int) : TrackOutput {
+    val timesUs = mutableListOf<Long>()
+    var format: Format? = null
+
+    val sampleCount: Int
+      get() = timesUs.size
+
+    override fun format(format: Format) {
+      this.format = format
+    }
+
+    override fun sampleData(input: DataReader, length: Int, allowEndOfInput: Boolean, sampleDataPart: Int): Int = input.read(ByteArray(length), 0, length)
+
+    override fun sampleData(data: ParsableByteArray, length: Int, sampleDataPart: Int) {
+      data.skipBytes(length)
+    }
+
+    override fun sampleMetadata(timeUs: Long, flags: Int, size: Int, offset: Int, cryptoData: TrackOutput.CryptoData?) {
+      timesUs.add(timeUs)
+    }
+  }
+
+  private class CapturingExtractorOutput : ExtractorOutput {
+    val tracks = mutableMapOf<Int, CapturedTrack>()
+    val seekMaps = mutableListOf<SeekMap>()
+
+    override fun track(id: Int, type: Int): TrackOutput = tracks.getOrPut(id) { CapturedTrack(type) }
+    override fun endTracks() = Unit
+    override fun seekMap(seekMap: SeekMap) {
+      seekMaps.add(seekMap)
+    }
+  }
+
+  private class ByteArrayDataReader(private val data: ByteArray) : DataReader {
+    var position = 0L
+
+    override fun read(buffer: ByteArray, offset: Int, length: Int): Int {
+      if (position >= data.size) return C.RESULT_END_OF_INPUT
+      val bytesRead = minOf(length, data.size - position.toInt())
+      data.copyInto(buffer, offset, position.toInt(), position.toInt() + bytesRead)
+      position += bytesRead
+      return bytesRead
+    }
+  }
+
+  private fun fixtureData(): ByteArray = checkNotNull(javaClass.getResourceAsStream("/matroska_tracks_at_end.mkv")) {
+    "fixture matroska_tracks_at_end.mkv missing from test resources"
+  }.use { it.readBytes() }
+
+  private fun readToEnd(extractor: Extractor, reader: ByteArrayDataReader, length: Long) {
+    var input: ExtractorInput = DefaultExtractorInput(reader, reader.position, length)
+    val seekPosition = PositionHolder()
+    repeat(100_000) {
+      when (extractor.read(input, seekPosition)) {
+        Extractor.RESULT_END_OF_INPUT -> return
+        Extractor.RESULT_SEEK -> {
+          reader.position = seekPosition.position
+          input = DefaultExtractorInput(reader, seekPosition.position, length)
+        }
+      }
+    }
+    error("extractor did not reach end of input")
+  }
+
+  @Test
+  fun extractsSamplesWhenSeekHeadReferencesTracksAfterClusters() {
+    val assHandler = AssHandler()
+    val extractor = ZlibMatroskaExtractor(AssSubtitleParserFactory(assHandler), assHandler)
+    val output = CapturingExtractorOutput()
+    extractor.init(output)
+
+    val data = fixtureData()
+    readToEnd(extractor, ByteArrayDataReader(data), data.size.toLong())
+
+    assertEquals(2, output.tracks.size)
+    assertEquals(setOf(C.TRACK_TYPE_VIDEO, C.TRACK_TYPE_AUDIO), output.tracks.values.map { it.type }.toSet())
+    output.tracks.values.forEach { track ->
+      assertNotNull(track.format)
+      assertTrue("expected extracted samples for track type ${track.type}", track.sampleCount > 0)
+    }
+  }
+
+  /**
+   * media3 1.11.0 builds the Matroska seek map at the end of the Cues element, which for
+   * tracks-after-clusters files is before the Tracks element parsed — the map then permanently
+   * reports unseekable and resolves every seek to byte 0, snapping playback to the start
+   * (#1969; upstream androidx/media #3377).
+   * The production stack must repair it through the per-track cue lookups.
+   */
+  @Test
+  fun seeksViaCuesWhenSeekMapIsBuiltBeforeTracks() {
+    val assHandler = AssHandler()
+    val extractor = CuelessSeekExtractorWrapper(ZlibMatroskaExtractor(AssSubtitleParserFactory(assHandler), assHandler))
+    val output = CapturingExtractorOutput()
+    extractor.init(output)
+
+    val data = fixtureData()
+    val reader = ByteArrayDataReader(data)
+    readToEnd(extractor, reader, data.size.toLong())
+
+    assertEquals(1, output.seekMaps.size)
+    val seekMap = output.seekMaps.single()
+    assertTrue("tracks-after-clusters file with Cues must be seekable", seekMap.isSeekable)
+
+    val points = seekMap.getSeekPoints(500_000L)
+    // Cue-based resolution snaps to the fixture's only cue point (t=0); a byte-proportional
+    // estimate would return the requested time instead.
+    assertEquals(0L, points.first.timeUs)
+    val position = points.first.position
+    val clusterId = byteArrayOf(0x1F, 0x43, 0xB6.toByte(), 0x75)
+    assertTrue(
+      "seek position $position must point at a Cluster element",
+      data.copyOfRange(position.toInt(), position.toInt() + 4).contentEquals(clusterId)
+    )
+
+    output.tracks.values.forEach { it.timesUs.clear() }
+    extractor.seek(position, points.first.timeUs)
+    reader.position = position
+    readToEnd(extractor, reader, data.size.toLong())
+
+    output.tracks.values.forEach { track ->
+      assertTrue("expected extracted samples after seek for track type ${track.type}", track.sampleCount > 0)
+      assertEquals(points.first.timeUs, track.timesUs.first())
+    }
+  }
+}
@@ -5,7 +5,14 @@ import androidx.media3.common.DataReader
 import androidx.media3.common.Format
 import androidx.media3.common.MimeTypes
 import androidx.media3.common.util.ParsableByteArray
+import androidx.media3.extractor.DefaultExtractorInput
+import androidx.media3.extractor.Extractor
+import androidx.media3.extractor.ExtractorOutput
+import androidx.media3.extractor.PositionHolder
+import androidx.media3.extractor.SeekMap
 import androidx.media3.extractor.TrackOutput
+import com.edde746.plezy.libass.media.AssHandler
+import com.edde746.plezy.libass.media.parser.AssSubtitleParserFactory
 import java.io.EOFException
 import org.junit.Assert.assertEquals
 import org.junit.Assert.assertFalse
@@ -17,17 +24,16 @@ import org.robolectric.RobolectricTestRunner
 import org.robolectric.annotation.Config

 /**
- * Drives LatmTrackOutput with LOAS frames from the committed fixture (1s 440Hz
- * sine, AAC-LC 48kHz stereo, LATM/LOAS) and verifies it unwraps them to raw
- * AAC with a synthesized AudioSpecificConfig. Both demuxer paths deliver LOAS
- * this way: the FFmpeg extractor wraps aac_latm tracks directly.
+ * Extracts the committed fixture (1s 440Hz sine, AAC-LC 48kHz stereo, LATM/LOAS
+ * muxed into MKV as A_MS/ACM tag 0x1602) and verifies direct Matroska playback
+ * unwraps LOAS frames to raw AAC with a synthesized AudioSpecificConfig.
 *
- * Robolectric provides real android.util.* implementations for media3's
- * internals.
+ * Robolectric provides real android.util.* implementations — MatroskaExtractor
+ * stores tracks in a SparseArray, which is a no-op stub on plain JVM.
 */
@RunWith(RobolectricTestRunner::class)
@Config(sdk = [34])
-class LatmTrackOutputTest {
+class MatroskaLatmSupportTest {

  private class CapturedSample(val timeUs: Long, val flags: Int, val data: ByteArray)

@@ -65,6 +71,14 @@ class LatmTrackOutputTest {
    }
  }

+  private class FakeExtractorOutput : ExtractorOutput {
+    val tracks = mutableMapOf<Int, FakeTrackOutput>()
+
+    override fun track(id: Int, type: Int): TrackOutput = tracks.getOrPut(id) { FakeTrackOutput() }
+    override fun endTracks() {}
+    override fun seekMap(seekMap: SeekMap) {}
+  }
+
  private class ByteArrayDataReader(private val data: ByteArray) : DataReader {
    var position = 0L

@@ -104,46 +118,76 @@ class LatmTrackOutputTest {
    return frames
  }

-  private fun placeholderFormat(): Format = Format.Builder()
-    .setId("1")
-    .setSampleMimeType(MimeTypes.AUDIO_AAC)
-    .setLabel("LATM track")
-    .setLanguage("eng")
-    .build()
+  private fun extractFixture(): FakeExtractorOutput {
+    val data = fixtureData()
+
+    val assHandler = AssHandler()
+    val extractor = ZlibMatroskaExtractor(AssSubtitleParserFactory(assHandler), assHandler)
+    val output = FakeExtractorOutput()
+    extractor.init(output)
+
+    val reader = ByteArrayDataReader(data)
+    var input = DefaultExtractorInput(reader, 0, data.size.toLong())
+    val seekPosition = PositionHolder()
+    while (true) {
+      when (extractor.read(input, seekPosition)) {
+        Extractor.RESULT_END_OF_INPUT -> return output
+        Extractor.RESULT_SEEK -> {
+          reader.position = seekPosition.position
+          input = DefaultExtractorInput(reader, seekPosition.position, data.size.toLong())
+        }
+        else -> {}
+      }
+    }
+  }

  @Test
-  fun unwrapsLoasFramesToRawAac() {
-    val delegate = FakeTrackOutput()
-    val output = LatmTrackOutput(delegate, 1)
-    output.format(placeholderFormat())
+  fun unwrapsLoasAcmTrackToRawAac() {
+    val output = extractFixture()

-    val frames = loasFrames(40)
-    var timeUs = 0L
-    for (frame in frames) {
-      output.sampleData(ParsableByteArray(frame), frame.size, TrackOutput.SAMPLE_DATA_PART_MAIN)
-      output.sampleMetadata(timeUs, C.BUFFER_FLAG_KEY_FRAME, frame.size, 0, null)
-      timeUs += 21_333
-    }
+    assertEquals(1, output.tracks.size)
+    val track = output.tracks.values.first()

-    // The placeholder format must be swallowed; the LATM-derived AAC format
-    // carries the AudioSpecificConfig and the original track metadata.
-    val format = delegate.formats.last()
+    // No audio/x-unknown format may reach the queue; the LATM-derived AAC
+    // format must carry the AudioSpecificConfig for MediaCodec.
+    assertFalse(track.formats.any { it.sampleMimeType == MimeTypes.AUDIO_UNKNOWN })
+    val format = track.formats.last()
    assertEquals(MimeTypes.AUDIO_AAC, format.sampleMimeType)
    assertEquals(48000, format.sampleRate)
    assertEquals(2, format.channelCount)
-    assertEquals("1", format.id)
-    assertEquals("LATM track", format.label)
    assertTrue(format.initializationData.isNotEmpty())
    assertTrue(format.initializationData[0].isNotEmpty())

-    assertTrue("expected ~40 samples, got ${delegate.samples.size}", delegate.samples.size in 35..40)
-    for (sample in delegate.samples) {
+    // 1s at 48kHz / 1024 samples per AAC frame ≈ 47 frames
+    assertTrue("expected ~47 samples, got ${track.samples.size}", track.samples.size in 40..55)
+
+    // Raw AAC payloads: smaller than the LOAS wrapping, no LOAS syncword,
+    // keyframe-flagged, monotonic timestamps spanning ~1s.
+    var prevTimeUs = Long.MIN_VALUE
+    for (sample in track.samples) {
      assertTrue(sample.data.isNotEmpty())
      val isLoasSync = sample.data.size >= 2 &&
        (sample.data[0].toInt() and 0xFF) == 0x56 &&
        (sample.data[1].toInt() and 0xE0) == 0xE0
      assertFalse("sample still LOAS-framed", isLoasSync)
+      assertEquals(C.BUFFER_FLAG_KEY_FRAME, sample.flags and C.BUFFER_FLAG_KEY_FRAME)
+      assertTrue(sample.timeUs >= prevTimeUs)
+      prevTimeUs = sample.timeUs
    }
+    val spanUs = track.samples.last().timeUs - track.samples.first().timeUs
+    assertTrue("expected ~1s span, got ${spanUs}us", spanUs in 800_000..1_200_000)
+  }
+
+  @Test
+  fun detectsLoasAcmCodecPrivate() {
+    val loas = byteArrayOf(0x02, 0x16, 0, 0, 0, 0)
+    assertTrue(isLoasAcmTrack("A_MS/ACM", loas))
+    // Wrong tag (PCM), wrong codec, or missing private data must not match
+    assertFalse(isLoasAcmTrack("A_MS/ACM", byteArrayOf(0x01, 0x00, 0, 0)))
+    assertFalse(isLoasAcmTrack("A_AAC", loas))
+    assertFalse(isLoasAcmTrack("A_MS/ACM", null))
+    assertFalse(isLoasAcmTrack("A_MS/ACM", byteArrayOf(0x02)))
+    assertFalse(isLoasAcmTrack(null, loas))
  }

  @Test
@@ -161,14 +205,19 @@ class LatmTrackOutputTest {
  }

  @Test
-  fun preservesStreamMuxConfigAcrossReset() {
+  fun preservesStreamMuxConfigAcrossExtractorSeek() {
    val frames = loasFrames(2)
    assertEquals(0, frames[0][3].toInt() and 0x80)
    assertEquals(0x80, frames[1][3].toInt() and 0x80)

    val delegate = FakeTrackOutput()
    val output = LatmTrackOutput(delegate, 1)
-    output.format(placeholderFormat())
+    output.format(
+      Format.Builder()
+        .setId("1")
+        .setSampleMimeType(MimeTypes.AUDIO_UNKNOWN)
+        .build()
+    )

    output.sampleData(ParsableByteArray(frames[0]), frames[0].size, TrackOutput.SAMPLE_DATA_PART_MAIN)
    output.sampleMetadata(0, C.BUFFER_FLAG_KEY_FRAME, frames[0].size, 0, null)
@@ -1,65 +0,0 @@
-package com.edde746.plezy.exoplayer
-
-import org.junit.Assert.assertEquals
-import org.junit.Assert.assertNull
-import org.junit.Test
-
-class StreamBitrateMeterTest {
-
-  /** Feeds [count] packets of [sizeBytes] every [intervalUs], starting at [startUs]. */
-  private fun StreamBitrateMeter.feed(count: Int, sizeBytes: Int, intervalUs: Long, startUs: Long = 0L) {
-    for (i in 0 until count) onPacket(startUs + i * intervalUs, sizeBytes)
-  }
-
-  @Test
-  fun `constant packet stream measures its bitrate`() {
-    val meter = StreamBitrateMeter()
-    // 1200-byte packets every 32 ms: 1200 * 8 / 0.032 = 300 kbps.
-    meter.feed(count = 32, sizeBytes = 1200, intervalUs = 32_000)
-    assertEquals(300_000, meter.bitrateBps())
-  }
-
-  @Test
-  fun `too few packets report nothing`() {
-    val meter = StreamBitrateMeter()
-    meter.feed(count = 15, sizeBytes = 1200, intervalUs = 32_000)
-    assertNull(meter.bitrateBps())
-  }
-
-  @Test
-  fun `zero pts span reports nothing`() {
-    val meter = StreamBitrateMeter()
-    repeat(32) { meter.onPacket(0L, 1200) }
-    assertNull(meter.bitrateBps())
-  }
-
-  @Test
-  fun `window drops old packets so a bitrate change is followed`() {
-    val meter = StreamBitrateMeter(windowUs = 1_000_000)
-    meter.feed(count = 100, sizeBytes = 1200, intervalUs = 32_000)
-    // Continue at four times the packet size; after well over a window of
-    // new packets, only the new rate remains.
-    meter.feed(count = 100, sizeBytes = 4800, intervalUs = 32_000, startUs = 100 * 32_000L)
-    assertEquals(1_200_000, meter.bitrateBps())
-  }
-
-  @Test
-  fun `backwards pts jump resets the window`() {
-    val meter = StreamBitrateMeter()
-    meter.feed(count = 32, sizeBytes = 1200, intervalUs = 32_000)
-    // Seek back: the single post-seek packet must not combine with the
-    // pre-seek span.
-    meter.onPacket(0L, 1200)
-    assertNull(meter.bitrateBps())
-    meter.feed(count = 31, sizeBytes = 1200, intervalUs = 32_000, startUs = 32_000)
-    assertEquals(300_000, meter.bitrateBps())
-  }
-
-  @Test
-  fun `empty packets are ignored`() {
-    val meter = StreamBitrateMeter()
-    meter.feed(count = 32, sizeBytes = 1200, intervalUs = 32_000)
-    meter.onPacket(32 * 32_000L, 0)
-    assertEquals(300_000, meter.bitrateBps())
-  }
-}
@@ -0,0 +1,248 @@
+package com.edde746.plezy.exoplayer
+
+import androidx.media3.common.C
+import androidx.media3.common.DataReader
+import androidx.media3.common.Format
+import androidx.media3.common.ParserException
+import androidx.media3.common.util.ParsableByteArray
+import androidx.media3.extractor.TrackOutput
+import java.io.ByteArrayOutputStream
+import java.util.zip.Deflater
+import java.util.zip.DeflaterOutputStream
+import org.junit.After
+import org.junit.Assert.assertArrayEquals
+import org.junit.Assert.assertEquals
+import org.junit.Assert.assertThrows
+import org.junit.Assert.assertTrue
+import org.junit.Before
+import org.junit.Test
+
+class ZlibInflatingTrackOutputTest {
+  @Before
+  fun enableMedia3TestBoundsChecks() {
+    ParsableByteArray.setShouldEnforceLimitOnLegacyMethods(true)
+  }
+
+  @After
+  fun resetMedia3TestBoundsChecks() {
+    ParsableByteArray.setShouldEnforceLimitOnLegacyMethods(null)
+  }
+
+  @Test
+  fun activeTransformInflatesChunkedSampleAndPreservesMetadata() {
+    val original = ByteArray(512 * 1024) { (it % 251).toByte() }
+    val compressed = deflate(original)
+    val delegate = RecordingTrackOutput(retainBytes = true)
+    val output = ZlibInflatingTrackOutput(delegate).apply { active = true }
+    val split = compressed.size / 2
+
+    output.sampleData(
+      ParsableByteArray(compressed.copyOfRange(0, split)),
+      split,
+      TrackOutput.SAMPLE_DATA_PART_MAIN
+    )
+    output.sampleData(
+      ParsableByteArray(compressed.copyOfRange(split, compressed.size)),
+      compressed.size - split,
+      TrackOutput.SAMPLE_DATA_PART_MAIN
+    )
+    output.sampleMetadata(42L, C.BUFFER_FLAG_KEY_FRAME, compressed.size, 0, null)
+
+    assertArrayEquals(original, delegate.retained.toByteArray())
+    assertEquals(42L, delegate.timeUs)
+    assertEquals(C.BUFFER_FLAG_KEY_FRAME, delegate.flags)
+    assertEquals(original.size, delegate.sampleSize)
+    assertEquals(0, delegate.offset)
+    assertEquals(1, delegate.metadataCount)
+  }
+
+  @Test
+  fun activeTransformUsesMetadataBoundariesForBufferedSamples() {
+    val first = ByteArray(4096) { (it % 19).toByte() }
+    val second = ByteArray(2048) { (it % 23).toByte() }
+    val firstCompressed = deflate(first)
+    val secondCompressed = deflate(second)
+    val combined = firstCompressed + secondCompressed
+    val delegate = RecordingTrackOutput(retainBytes = true)
+    val output = ZlibInflatingTrackOutput(delegate).apply { active = true }
+
+    output.sampleData(ParsableByteArray(combined), combined.size, TrackOutput.SAMPLE_DATA_PART_MAIN)
+    output.sampleMetadata(1, 0, firstCompressed.size, secondCompressed.size, null)
+    output.sampleMetadata(2, 0, secondCompressed.size, 0, null)
+
+    assertArrayEquals(first + second, delegate.retained.toByteArray())
+    assertEquals(2, delegate.metadataCount)
+  }
+
+  @Test
+  fun exactlySixteenMiBInflatedSampleIsAccepted() {
+    val size = 16 * 1024 * 1024
+    val compressed = deflateRepeated(size)
+    val delegate = RecordingTrackOutput()
+    val output = ZlibInflatingTrackOutput(delegate).apply { active = true }
+
+    feed(output, compressed)
+
+    assertEquals(size, delegate.byteCount)
+    assertEquals(size, delegate.sampleSize)
+    assertEquals(1, delegate.metadataCount)
+    assertTrue(compressed.size < 64 * 1024)
+  }
+
+  @Test
+  fun oneByteOverInflatedLimitFailsBeforeDelegation() {
+    val compressed = deflateRepeated(16 * 1024 * 1024 + 1)
+    val delegate = RecordingTrackOutput()
+    val output = ZlibInflatingTrackOutput(delegate).apply { active = true }
+
+    assertThrows(ParserException::class.java) { feed(output, compressed) }
+
+    assertEquals(0, delegate.byteCount)
+    assertEquals(0, delegate.metadataCount)
+    assertTrue(compressed.size < 64 * 1024)
+  }
+
+  @Test
+  fun excessiveCompressionRatioFailsBeforeInflatedSizeLimit() {
+    val compressed = deflate(ByteArray(8 * 1024 * 1024))
+    val delegate = RecordingTrackOutput()
+    val output = ZlibInflatingTrackOutput(delegate).apply { active = true }
+
+    assertThrows(ParserException::class.java) { feed(output, compressed) }
+
+    assertEquals(0, delegate.byteCount)
+    assertEquals(0, delegate.metadataCount)
+  }
+
+  @Test
+  fun corruptStreamPassesTheBoundedSampleThroughUnchanged() {
+    val corrupt = byteArrayOf(0, 1, 2, 3)
+    val delegate = RecordingTrackOutput(retainBytes = true)
+    val output = ZlibInflatingTrackOutput(delegate).apply { active = true }
+
+    feed(output, corrupt)
+
+    assertArrayEquals(corrupt, delegate.retained.toByteArray())
+    assertEquals(corrupt.size, delegate.sampleSize)
+    assertEquals(1, delegate.metadataCount)
+  }
+
+  @Test
+  fun truncatedAndDictionaryStreamsFailClosed() {
+    val valid = deflate(ByteArray(4096) { 7 })
+    val dictionary = "shared-zlib-dictionary".toByteArray()
+    val cases = listOf(
+      valid.copyOf(valid.size - 2),
+      deflate(ByteArray(4096) { 3 }, dictionary)
+    )
+
+    for (compressed in cases) {
+      val delegate = RecordingTrackOutput()
+      val output = ZlibInflatingTrackOutput(delegate).apply { active = true }
+
+      assertThrows(ParserException::class.java) { feed(output, compressed) }
+      assertEquals(0, delegate.byteCount)
+      assertEquals(0, delegate.metadataCount)
+    }
+  }
+
+  @Test
+  fun inactiveWrapperDelegatesBytesAndMetadataUnchanged() {
+    val bytes = byteArrayOf(9, 8, 7, 6)
+    val trailing = byteArrayOf(5, 4)
+    val allBytes = bytes + trailing
+    val delegate = RecordingTrackOutput(retainBytes = true)
+    val output = ZlibInflatingTrackOutput(delegate)
+
+    output.sampleData(ParsableByteArray(allBytes), allBytes.size, TrackOutput.SAMPLE_DATA_PART_MAIN)
+    output.sampleMetadata(99L, 3, bytes.size, trailing.size, null)
+
+    assertArrayEquals(allBytes, delegate.retained.toByteArray())
+    assertEquals(bytes.size, delegate.sampleSize)
+    assertEquals(trailing.size, delegate.offset)
+    assertEquals(99L, delegate.timeUs)
+  }
+
+  private fun feed(output: ZlibInflatingTrackOutput, compressed: ByteArray) {
+    output.sampleData(
+      ParsableByteArray(compressed),
+      compressed.size,
+      TrackOutput.SAMPLE_DATA_PART_MAIN
+    )
+    output.sampleMetadata(1L, C.BUFFER_FLAG_KEY_FRAME, compressed.size, 0, null)
+  }
+
+  private fun deflate(bytes: ByteArray, dictionary: ByteArray? = null): ByteArray {
+    val target = ByteArrayOutputStream()
+    val deflater = Deflater().apply {
+      if (dictionary != null) setDictionary(dictionary)
+    }
+    DeflaterOutputStream(target, deflater).use { it.write(bytes) }
+    return target.toByteArray()
+  }
+
+  private fun deflateRepeated(size: Int): ByteArray {
+    val target = ByteArrayOutputStream()
+    val chunk = ByteArray(8192) { (it % 7).toByte() }
+    DeflaterOutputStream(target).use { stream ->
+      var remaining = size
+      while (remaining > 0) {
+        val count = minOf(remaining, chunk.size)
+        stream.write(chunk, 0, count)
+        remaining -= count
+      }
+    }
+    return target.toByteArray()
+  }
+
+  private class RecordingTrackOutput(
+    private val retainBytes: Boolean = false
+  ) : TrackOutput {
+    val retained = ByteArrayOutputStream()
+    var byteCount = 0
+    var metadataCount = 0
+    var timeUs = C.TIME_UNSET
+    var flags = 0
+    var sampleSize = -1
+    var offset = -1
+
+    override fun format(format: Format) = Unit
+
+    override fun sampleData(
+      input: DataReader,
+      length: Int,
+      allowEndOfInput: Boolean,
+      sampleDataPart: Int
+    ): Int {
+      val buffer = ByteArray(length)
+      val read = input.read(buffer, 0, length)
+      if (read > 0) record(buffer, read)
+      return read
+    }
+
+    override fun sampleData(data: ParsableByteArray, length: Int, sampleDataPart: Int) {
+      val buffer = ByteArray(length)
+      data.readBytes(buffer, 0, length)
+      record(buffer, length)
+    }
+
+    private fun record(buffer: ByteArray, length: Int) {
+      byteCount += length
+      if (retainBytes) retained.write(buffer, 0, length)
+    }
+
+    override fun sampleMetadata(
+      timeUs: Long,
+      flags: Int,
+      size: Int,
+      offset: Int,
+      cryptoData: TrackOutput.CryptoData?
+    ) {
+      metadataCount++
+      this.timeUs = timeUs
+      this.flags = flags
+      sampleSize = size
+      this.offset = offset
+    }
+  }
+}
@@ -0,0 +1,80 @@
+package com.edde746.plezy.exoplayer
+
+import java.io.ByteArrayOutputStream
+import java.util.zip.Deflater
+import java.util.zip.DeflaterOutputStream
+import java.util.zip.Inflater
+import org.junit.Assert.assertArrayEquals
+import org.junit.Assert.assertNull
+import org.junit.Test
+
+/**
+ * Unit spec for [rewriteZlibTextBlock]: the block header (track-number varint,
+ * timecode, flags) must survive byte-identically, the payload must inflate, and
+ * every block the rewriter cannot prove safe must pass through unchanged (null).
+ */
+class ZlibTextBlockTest {
+
+  private val inflater = Inflater()
+
+  private fun block(header: ByteArray, payload: ByteArray): ByteArray = header + payload
+
+  private fun deflate(bytes: ByteArray): ByteArray {
+    val target = ByteArrayOutputStream()
+    DeflaterOutputStream(target, Deflater()).use { it.write(bytes) }
+    return target.toByteArray()
+  }
+
+  // Track 3 (varint 0x83), relative timecode 0x0102, no lacing.
+  private val unlacedHeader = byteArrayOf(0x83.toByte(), 0x01, 0x02, 0x00)
+
+  @Test
+  fun inflatesUnlacedBlockPayloadAndPreservesHeader() {
+    val dialogue = "42,,Default,,0,0,0,,SUBTITLE LINE 1 (0:00:00.00)".toByteArray()
+    val data = block(unlacedHeader, deflate(dialogue))
+
+    val rewritten = rewriteZlibTextBlock(data, data.size, inflater)!!
+
+    assertArrayEquals(unlacedHeader + dialogue, rewritten)
+  }
+
+  @Test
+  fun twoByteTrackNumberVarintIsPreserved() {
+    val dialogue = "1,,Default,,0,0,0,,hello".toByteArray()
+    val header = byteArrayOf(0x41, 0x2A, 0x01, 0x02, 0x00) // varint 0x412A = track 298
+    val data = block(header, deflate(dialogue))
+
+    val rewritten = rewriteZlibTextBlock(data, data.size, inflater)!!
+
+    assertArrayEquals(header + dialogue, rewritten)
+  }
+
+  @Test
+  fun lacedBlockPassesThrough() {
+    val laced = byteArrayOf(0x83.toByte(), 0x01, 0x02, 0x06) // EBML lacing bits set
+    val data = block(laced, deflate("payload".toByteArray()))
+
+    assertNull(rewriteZlibTextBlock(data, data.size, inflater))
+  }
+
+  @Test
+  fun corruptStreamPassesThrough() {
+    val data = block(unlacedHeader, byteArrayOf(0x44, 0x69, 0x61, 0x6C)) // "Dial", not zlib
+
+    assertNull(rewriteZlibTextBlock(data, data.size, inflater))
+  }
+
+  @Test
+  fun truncatedStreamPassesThrough() {
+    val compressed = deflate("a longer payload that spans several deflate symbols".toByteArray())
+    val truncated = compressed.copyOf(compressed.size - 4)
+    val data = block(unlacedHeader, truncated)
+
+    assertNull(rewriteZlibTextBlock(data, data.size, inflater))
+  }
+
+  @Test
+  fun headerOnlyBlockPassesThrough() {
+    assertNull(rewriteZlibTextBlock(unlacedHeader, unlacedHeader.size, inflater))
+  }
+}
@@ -0,0 +1,170 @@
+package com.edde746.plezy.exoplayer
+
+import androidx.media3.common.C
+import androidx.media3.common.DataReader
+import androidx.media3.common.MimeTypes
+import androidx.media3.common.util.ParsableByteArray
+import androidx.media3.extractor.DefaultExtractorInput
+import androidx.media3.extractor.Extractor
+import androidx.media3.extractor.ExtractorOutput
+import androidx.media3.extractor.PositionHolder
+import androidx.media3.extractor.SeekMap
+import androidx.media3.extractor.TrackOutput
+import androidx.media3.extractor.text.CueDecoder
+import androidx.media3.extractor.text.DefaultSubtitleParserFactory
+import com.edde746.plezy.libass.media.AssHandler
+import org.junit.Assert.assertEquals
+import org.junit.Assert.assertTrue
+import org.junit.Test
+import org.junit.runner.RunWith
+import org.robolectric.RobolectricTestRunner
+import org.robolectric.annotation.Config
+
+/**
+ * Extracts the committed fixtures — one ASS subtitle track muxed by mkvmerge with
+ * `--compression 0:zlib` (ContentCompAlgo 0, the anime-release convention that
+ * broke #2023) and an identical uncompressed mux — and verifies the zlib block
+ * payloads are inflated *before* MatroskaExtractor's subtitle sample assembly.
+ *
+ * Regenerate with:
+ *   mkvmerge -o zlib_ssa.mkv --compression 0:zlib repro.ass
+ *   mkvmerge -o plain_ssa.mkv --compression 0:none repro.ass
+ * where repro.ass holds 45 two-second "SUBTITLE LINE N (H:MM:SS.00)" events.
+ *
+ * Robolectric provides real android.util/android.os implementations —
+ * MatroskaExtractor uses SparseArray and CueDecoder uses Parcel, both of which
+ * are no-op stubs on plain JVM.
+ */
+@RunWith(RobolectricTestRunner::class)
+@Config(sdk = [34])
+class ZlibTextSubtitleExtractionTest {
+
+  private class CapturedSample(val timeUs: Long, val data: ByteArray)
+
+  private class FakeTrackOutput : TrackOutput {
+    val formats = mutableListOf<androidx.media3.common.Format>()
+    val samples = mutableListOf<CapturedSample>()
+    private var buf = ByteArray(64 * 1024)
+    private var bufLen = 0
+
+    override fun format(format: androidx.media3.common.Format) {
+      formats.add(format)
+    }
+
+    override fun sampleData(input: DataReader, length: Int, allowEndOfInput: Boolean, sampleDataPart: Int): Int {
+      ensureCapacity(bufLen + length)
+      val read = input.read(buf, bufLen, length)
+      if (read > 0) bufLen += read
+      return read
+    }
+
+    override fun sampleData(data: ParsableByteArray, length: Int, sampleDataPart: Int) {
+      ensureCapacity(bufLen + length)
+      data.readBytes(buf, bufLen, length)
+      bufLen += length
+    }
+
+    override fun sampleMetadata(timeUs: Long, flags: Int, size: Int, offset: Int, cryptoData: TrackOutput.CryptoData?) {
+      val start = bufLen - offset - size
+      samples.add(CapturedSample(timeUs, buf.copyOfRange(start, start + size)))
+      if (offset == 0) bufLen = 0
+    }
+
+    private fun ensureCapacity(needed: Int) {
+      if (buf.size < needed) buf = buf.copyOf(maxOf(needed, buf.size * 2))
+    }
+  }
+
+  private class FakeExtractorOutput : ExtractorOutput {
+    val tracks = mutableMapOf<Int, FakeTrackOutput>()
+
+    override fun track(id: Int, type: Int): TrackOutput = tracks.getOrPut(id) { FakeTrackOutput() }
+    override fun endTracks() {}
+    override fun seekMap(seekMap: SeekMap) {}
+  }
+
+  private class ByteArrayDataReader(private val data: ByteArray) : DataReader {
+    var position = 0L
+
+    override fun read(buffer: ByteArray, offset: Int, length: Int): Int {
+      if (position >= data.size) return C.RESULT_END_OF_INPUT
+      val toRead = minOf(length, data.size - position.toInt())
+      System.arraycopy(data, position.toInt(), buffer, offset, toRead)
+      position += toRead
+      return toRead
+    }
+  }
+
+  private fun extract(resource: String): FakeExtractorOutput {
+    val data = checkNotNull(javaClass.getResourceAsStream(resource)) {
+      "fixture $resource missing from test resources"
+    }.use { it.readBytes() }
+
+    // DefaultSubtitleParserFactory (not AssSubtitleParserFactory) so the SSA track
+    // transcodes to decodable media3 cues instead of loading native libass.
+    val extractor = ZlibMatroskaExtractor(DefaultSubtitleParserFactory(), AssHandler())
+    val output = FakeExtractorOutput()
+    extractor.init(output)
+
+    val reader = ByteArrayDataReader(data)
+    var input = DefaultExtractorInput(reader, 0, data.size.toLong())
+    val seekPosition = PositionHolder()
+    while (true) {
+      when (extractor.read(input, seekPosition)) {
+        Extractor.RESULT_END_OF_INPUT -> return output
+        Extractor.RESULT_SEEK -> {
+          reader.position = seekPosition.position
+          input = DefaultExtractorInput(reader, seekPosition.position, data.size.toLong())
+        }
+        else -> {}
+      }
+    }
+  }
+
+  private class DecodedCue(val startTimeUs: Long, val durationUs: Long, val text: String)
+
+  private fun decodeCues(output: FakeExtractorOutput): List<DecodedCue> {
+    val track = output.tracks.values.single()
+    val format = track.formats.last()
+    assertEquals(MimeTypes.APPLICATION_MEDIA3_CUES, format.sampleMimeType)
+    assertEquals(MimeTypes.TEXT_SSA, format.codecs)
+    val decoder = CueDecoder()
+    return track.samples.map { sample ->
+      val cues = decoder.decode(sample.timeUs, sample.data, 0, sample.data.size)
+      DecodedCue(
+        cues.startTimeUs,
+        cues.durationUs,
+        cues.cues.joinToString("\n") { it.text.toString() }
+      )
+    }
+  }
+
+  @Test
+  fun zlibCompressedAssDialogueIsInflatedToParseableCues() {
+    val cues = decodeCues(extract("/zlib_ssa.mkv"))
+
+    assertEquals(45, cues.size)
+    assertEquals("SUBTITLE LINE 1 (0:00:00.00)", cues.first().text)
+    assertEquals(0L, cues.first().startTimeUs)
+    assertEquals(2_000_000L, cues.first().durationUs)
+    assertEquals("SUBTITLE LINE 45 (0:01:28.00)", cues.last().text)
+    assertEquals(88_000_000L, cues.last().startTimeUs)
+    cues.forEachIndexed { index, cue ->
+      assertEquals(index * 2_000_000L, cue.startTimeUs)
+      assertTrue("cue $index text: ${cue.text}", cue.text.startsWith("SUBTITLE LINE ${index + 1} "))
+    }
+  }
+
+  @Test
+  fun zlibAndPlainMuxesProduceIdenticalCues() {
+    val zlib = decodeCues(extract("/zlib_ssa.mkv"))
+    val plain = decodeCues(extract("/plain_ssa.mkv"))
+
+    assertEquals(plain.size, zlib.size)
+    plain.zip(zlib).forEachIndexed { index, (expected, actual) ->
+      assertEquals("startTimeUs of cue $index", expected.startTimeUs, actual.startTimeUs)
+      assertEquals("durationUs of cue $index", expected.durationUs, actual.durationUs)
+      assertEquals("text of cue $index", expected.text, actual.text)
+    }
+  }
+}
@@ -0,0 +1,38 @@
+package com.edde746.plezy.mpv
+
+import org.junit.Assert.assertEquals
+import org.junit.Assert.assertNull
+import org.junit.Test
+
+/** Boundaries are the contract; rationale on [DemuxerBudget]. */
+class DemuxerBudgetTest {
+  private val mib = 1024L * 1024L
+
+  @Test
+  fun `unknown heap class keeps mpv defaults`() {
+    assertNull(DemuxerBudget.forHeapClassMB(0))
+    assertNull(DemuxerBudget.forHeapClassMB(-1))
+  }
+
+  @Test
+  fun `small heap class gets the tight tier`() {
+    val budget = DemuxerBudget.forHeapClassMB(256)!!
+    assertEquals(32 * mib, budget.aheadBytes)
+    assertEquals(16 * mib, budget.backBytes)
+  }
+
+  @Test
+  fun `mid heap class gets the middle tier`() {
+    assertEquals(64 * mib, DemuxerBudget.forHeapClassMB(257)!!.aheadBytes)
+    val budget = DemuxerBudget.forHeapClassMB(512)!!
+    assertEquals(64 * mib, budget.aheadBytes)
+    assertEquals(32 * mib, budget.backBytes)
+  }
+
+  @Test
+  fun `large heap class gets the full tier`() {
+    val budget = DemuxerBudget.forHeapClassMB(513)!!
+    assertEquals(100 * mib, budget.aheadBytes)
+    assertEquals(48 * mib, budget.backBytes)
+  }
+}
@@ -0,0 +1,114 @@
+package com.edde746.plezy.mpv
+
+import org.junit.Assert.assertEquals
+import org.junit.Assert.assertFalse
+import org.junit.Assert.assertNull
+import org.junit.Assert.assertTrue
+import org.junit.Test
+
+/**
+ * P5 has no compatible base layer: on a device without native DV it must
+ * leave the video plane for gpu-next software reshaping, and nothing else
+ * may be routed (wrong-colors class verified on a Pixel 7). The vo target
+ * matrix keeps gpu-next away from hardware sessions (#2010) while giving
+ * the reshaping path the only vo that composites RPU metadata (#1902).
+ */
+class GpuVoPolicyTest {
+  @Test
+  fun `P5 without native support is routed`() {
+    assertTrue(GpuVoPolicy.needsDvReshaping(5L, "auto", canPlayP5Natively = false))
+  }
+
+  @Test
+  fun `P5 with native support stays on the plane`() {
+    assertFalse(GpuVoPolicy.needsDvReshaping(5L, "auto", canPlayP5Natively = true))
+  }
+
+  @Test
+  fun `base-layer-compatible profiles are never routed`() {
+    // P7/P8 strip to an HDR10/HLG base layer; non-DV content has no profile.
+    assertFalse(GpuVoPolicy.needsDvReshaping(7L, "auto", canPlayP5Natively = false))
+    assertFalse(GpuVoPolicy.needsDvReshaping(8L, "auto", canPlayP5Natively = false))
+    assertFalse(GpuVoPolicy.needsDvReshaping(null, "auto", canPlayP5Natively = false))
+  }
+
+  @Test
+  fun `explicit conversion modes are user overrides and stay native`() {
+    for (mode in listOf("disabled", "native", "dv81", "hevc", "hevc_strip")) {
+      assertFalse(mode, GpuVoPolicy.needsDvReshaping(5L, mode, canPlayP5Natively = false))
+    }
+  }
+
+  @Test
+  fun `hdr tone-mapping is needed only for a PQ or HLG signal on a non-HDR display`() {
+    assertTrue(GpuVoPolicy.needsHdrToneMapping("pq", displaySupportsHdr = false))
+    assertTrue(GpuVoPolicy.needsHdrToneMapping("hlg", displaySupportsHdr = false))
+    // An HDR display scans the signal out itself.
+    assertFalse(GpuVoPolicy.needsHdrToneMapping("pq", displaySupportsHdr = true))
+    assertFalse(GpuVoPolicy.needsHdrToneMapping("hlg", displaySupportsHdr = true))
+    // SDR transfers need no mapping, and mpv reports none before the first
+    // frame of a file.
+    assertFalse(GpuVoPolicy.needsHdrToneMapping("bt.1886", displaySupportsHdr = false))
+    assertFalse(GpuVoPolicy.needsHdrToneMapping("srgb", displaySupportsHdr = false))
+    assertFalse(GpuVoPolicy.needsHdrToneMapping(null, displaySupportsHdr = false))
+    assertFalse(GpuVoPolicy.needsHdrToneMapping("", displaySupportsHdr = false))
+  }
+
+  @Test
+  fun `only direct mediacodec output can stay on the plane`() {
+    // -copy also reads frames back into system memory, so it leaves too.
+    assertTrue(GpuVoPolicy.needsSoftwareRender("no"))
+    assertTrue(GpuVoPolicy.needsSoftwareRender("mediacodec-copy"))
+    assertFalse(GpuVoPolicy.needsSoftwareRender("mediacodec"))
+    // Unreported until the decoder initializes: stay on the plane.
+    assertFalse(GpuVoPolicy.needsSoftwareRender(null))
+    assertFalse(GpuVoPolicy.needsSoftwareRender(""))
+  }
+
+  @Test
+  fun `a software-decoding session targets gpu, not gpu-next`() {
+    assertEquals("gpu", GpuVoPolicy.targetFor(setOf(GpuVoPolicy.REASON_SW_DECODE)))
+    assertEquals("gpu", GpuVoPolicy.targetFor(setOf(GpuVoPolicy.REASON_SHADERS)))
+    assertEquals(
+      "gpu",
+      GpuVoPolicy.targetFor(setOf(GpuVoPolicy.REASON_SHADERS, GpuVoPolicy.REASON_SW_DECODE))
+    )
+  }
+
+  @Test
+  fun `no reasons keeps the video plane`() {
+    assertNull(GpuVoPolicy.targetFor(emptySet()))
+  }
+
+  @Test
+  fun `dv reshaping targets gpu-next even alongside other reasons`() {
+    assertEquals("gpu-next", GpuVoPolicy.targetFor(setOf(GpuVoPolicy.REASON_DV_RESHAPE)))
+    assertEquals(
+      "gpu-next",
+      GpuVoPolicy.targetFor(setOf(GpuVoPolicy.REASON_SHADERS, GpuVoPolicy.REASON_DV_RESHAPE))
+    )
+  }
+
+  @Test
+  fun `shaders and chain failure target the hardware-safe gpu vo`() {
+    assertEquals("gpu", GpuVoPolicy.targetFor(setOf(GpuVoPolicy.REASON_SHADERS)))
+    assertEquals("gpu", GpuVoPolicy.targetFor(setOf(GpuVoPolicy.REASON_CHAIN_FAILURE)))
+    assertEquals(
+      "gpu",
+      GpuVoPolicy.targetFor(setOf(GpuVoPolicy.REASON_SHADERS, GpuVoPolicy.REASON_CHAIN_FAILURE))
+    )
+  }
+
+  @Test
+  fun `hdr tone-mapping targets gpu but yields to dv reshaping`() {
+    assertEquals("gpu", GpuVoPolicy.targetFor(setOf(GpuVoPolicy.REASON_HDR_SDR)))
+    assertEquals(
+      "gpu",
+      GpuVoPolicy.targetFor(setOf(GpuVoPolicy.REASON_HDR_SDR, GpuVoPolicy.REASON_SHADERS))
+    )
+    assertEquals(
+      "gpu-next",
+      GpuVoPolicy.targetFor(setOf(GpuVoPolicy.REASON_HDR_SDR, GpuVoPolicy.REASON_DV_RESHAPE))
+    )
+  }
+}
@@ -7,11 +7,11 @@ import android.os.Looper
 import android.view.ViewGroup
 import android.view.ViewTreeObserver
 import android.widget.FrameLayout
+import com.edde746.plezy.libmpv.EndFileReason
+import com.edde746.plezy.libmpv.LogLevel
+import com.edde746.plezy.libmpv.LogMessage
+import com.edde746.plezy.libmpv.MpvEvent
 import com.edde746.plezy.shared.AudioFocusManager
-import dev.jdtech.mpv.EndFileReason
-import dev.jdtech.mpv.LogLevel
-import dev.jdtech.mpv.LogMessage
-import dev.jdtech.mpv.MpvEvent
 import io.flutter.embedding.engine.plugins.FlutterPlugin
 import io.flutter.plugin.common.EventChannel
 import io.flutter.plugin.common.MethodCall
@@ -24,6 +24,7 @@ import java.util.concurrent.atomic.AtomicInteger
 import kotlinx.coroutines.suspendCancellableCoroutine
 import org.junit.Assert.assertEquals
 import org.junit.Assert.assertFalse
+import org.junit.Assert.assertNotNull
 import org.junit.Assert.assertNull
 import org.junit.Assert.assertTrue
 import org.junit.Test
@@ -62,14 +63,24 @@ class MpvPlayerPluginTest {
  }

  @Test
-  fun hardwareDecodeSessionsKeepTheLegacyGpuVo() {
-    // gpu-next under hwdec=mediacodec fails every frame on Tegra (the
-    // cross-stage samplerExternalOES linker bug): solid blue screen with
-    // audio on the Shield (#2010). DV reshaping — the reason gpu-next exists
-    // on Android (#1902) — only happens under software decode anyway, so
-    // gpu-next is offered exactly there and nowhere else.
-    assertEquals("gpu", MpvPlayerCore.initialVideoOutput(hardwareDecoding = true))
-    assertEquals("gpu-next,gpu", MpvPlayerCore.initialVideoOutput(hardwareDecoding = false))
+  fun hardwareDecodeSessionsUseTheMediaCodecVoWithGpuFallback() {
+    // Rationale on MpvPlayerCore.initialVideoOutput.
+    assertEquals("mediacodec,gpu", MpvPlayerCore.initialVideoOutput(hardwareDecoding = true))
+    assertEquals("gpu,gpu-next", MpvPlayerCore.initialVideoOutput(hardwareDecoding = false))
+  }
+
+  @Test
+  fun hdrSurfaceIsWantedOnlyForPqAndHlgTransfers() {
+    // Rationale on MpvPlayerCore.wantsHdrSurface: both render into a PQ
+    // target; anything else stays on the sRGB surface, which renders every
+    // content correctly.
+    assertTrue(MpvPlayerCore.wantsHdrSurface("smpte2084"))
+    assertTrue(MpvPlayerCore.wantsHdrSurface("arib-std-b67"))
+    assertFalse(MpvPlayerCore.wantsHdrSurface("bt709"))
+    assertFalse(MpvPlayerCore.wantsHdrSurface("bt1886"))
+    assertFalse(MpvPlayerCore.wantsHdrSurface("unknown"))
+    assertFalse(MpvPlayerCore.wantsHdrSurface(""))
+    assertFalse(MpvPlayerCore.wantsHdrSurface(null))
  }

  @Test
@@ -622,6 +633,53 @@ class MpvPlayerPluginTest {
    assertEquals(0, pending.size)
  }

+  @Test
+  fun staleDisposeIsAcknowledgedWithoutTearingDownTheCore() {
+    // A dispose whose instanceId is not the core creator's lost the ownership
+    // race to a successor; tearing the core down anyway would kill that
+    // successor's session. It must be acknowledged as a no-op instead.
+    val plugin = MpvPlayerPlugin()
+    installCore(plugin, testCore { _, _ -> })
+    setPluginField(plugin, "coreInstanceId", 2L)
+    val result = RecordingResult()
+
+    plugin.onMethodCall(MethodCall("dispose", mapOf("instanceId" to 1)), result)
+    awaitCompletion(result)
+
+    assertNull(result.errorCode)
+    assertNotNull(getPluginField(plugin, "playerCore"))
+    assertEquals(2L, getPluginField(plugin, "coreInstanceId"))
+  }
+
+  @Test
+  fun matchingDisposeTearsDownTheCoreAndClearsTheToken() {
+    val plugin = MpvPlayerPlugin()
+    installCore(plugin, testCore { _, _ -> })
+    setPluginField(plugin, "coreInstanceId", 7L)
+    val result = RecordingResult()
+
+    plugin.onMethodCall(MethodCall("dispose", mapOf("instanceId" to 7)), result)
+    awaitCompletion(result)
+
+    assertNull(result.errorCode)
+    assertNull(getPluginField(plugin, "playerCore"))
+    assertNull(getPluginField(plugin, "coreInstanceId"))
+  }
+
+  @Test
+  fun tokenlessDisposeKeepsLegacySemanticsAndTearsDownTheCore() {
+    val plugin = MpvPlayerPlugin()
+    installCore(plugin, testCore { _, _ -> })
+    setPluginField(plugin, "coreInstanceId", 7L)
+    val result = RecordingResult()
+
+    plugin.onMethodCall(MethodCall("dispose", null), result)
+    awaitCompletion(result)
+
+    assertNull(result.errorCode)
+    assertNull(getPluginField(plugin, "playerCore"))
+  }
+
  @Test
  fun configDetachThenEngineDetachTearsDownVideoCoreAndPendingInitOnce() {
    val activity = Robolectric.buildActivity(Activity::class.java).setup().get()
@@ -891,6 +949,97 @@ class MpvPlayerPluginTest {
    getBoolean(core)
  }

+  private fun invokeSetGpuVoRequirement(core: MpvPlayerCore, reason: String, active: Boolean) {
+    MpvPlayerCore::class.java
+      .getDeclaredMethod("setGpuVoRequirement", String::class.java, Boolean::class.javaPrimitiveType)
+      .apply {
+        isAccessible = true
+        invoke(core, reason, active)
+      }
+  }
+
+  @Test
+  fun voTargetFollowsTheActiveReasonSet() {
+    // Reason precedence through the real property-write path: DV reshaping
+    // outranks HDR-on-SDR, dropping the winner falls back to the reason still
+    // active, and dropping the last one returns the session to the plane.
+    val activity = Robolectric.buildActivity(Activity::class.java).setup().get()
+    val writes = ConcurrentLinkedQueue<Pair<String, String>>()
+    val core = MpvPlayerCore(activity, audioOnly = false, propertyWriter = { name, value ->
+      writes.add(name to value)
+    })
+    setBoolean(core, "isInitialized", true)
+
+    fun lastVo(): String? = writes.toList().lastOrNull { it.first == "vo" }?.second
+
+    // HDR-on-SDR raises first, then the DV router wins the arbitration.
+    invokeSetGpuVoRequirement(core, GpuVoPolicy.REASON_HDR_SDR, true)
+    invokeSetGpuVoRequirement(core, GpuVoPolicy.REASON_DV_RESHAPE, true)
+    awaitCondition { lastVo() == "gpu-next" }
+    assertEquals("gpu-next", lastVo())
+
+    // Dropping the winning reason must fall back to the one still active,
+    // not to the plane.
+    invokeSetGpuVoRequirement(core, GpuVoPolicy.REASON_DV_RESHAPE, false)
+    awaitCondition { lastVo() == "gpu" }
+    assertEquals("gpu", lastVo())
+
+    // Last reason dropping returns the session to the video plane.
+    invokeSetGpuVoRequirement(core, GpuVoPolicy.REASON_HDR_SDR, false)
+    awaitCondition { lastVo() == "mediacodec" }
+    assertEquals("mediacodec", lastVo())
+  }
+
+  @Test
+  fun dvConversionModeMapsOntoForkDecoderOptions() {
+    // The app-level `dv-conversion-mode` property must translate to the fork
+    // FFmpeg hevc_mediacodec options, mirroring the ExoPlayer DoviBridge
+    // modes. Robolectric reports no Dolby Vision display, so `auto` takes the
+    // no-DV branch deterministically.
+    val activity = Robolectric.buildActivity(Activity::class.java).setup().get()
+    val writes = ConcurrentLinkedQueue<Pair<String, String>>()
+    val core = MpvPlayerCore(activity, audioOnly = false, propertyWriter = { name, value ->
+      writes.add(name to value)
+    })
+
+    fun apply(mode: String): Result<Unit> {
+      writes.clear()
+      var outcome: Result<Unit>? = null
+      core.setProperty("dv-conversion-mode", mode) { outcome = it }
+      awaitCondition { outcome != null }
+      return outcome!!
+    }
+
+    assertTrue(apply("auto").isSuccess)
+    assertEquals(listOf("vd-lavc-o" to "dolby_vision=0,dv_p7_mode=strip"), writes.toList())
+
+    assertTrue(apply("disabled").isSuccess)
+    assertEquals(listOf("vd-lavc-o" to "dolby_vision=1,dv_p7_mode=native"), writes.toList())
+
+    assertTrue(apply("dv81").isSuccess)
+    assertEquals(listOf("vd-lavc-o" to "dolby_vision=1,dv_p7_mode=convert"), writes.toList())
+
+    assertTrue(apply("hevc_strip").isSuccess)
+    assertEquals(listOf("vd-lavc-o" to "dolby_vision=1,dv_p7_mode=strip"), writes.toList())
+
+    val invalid = apply("bogus")
+    assertTrue(invalid.isFailure)
+    assertTrue(writes.isEmpty())
+  }
+
+  @Test
+  fun decoderOptionsMergeKeepsUserEntriesFirst() {
+    // The property interface cannot append to a list option, so the write
+    // replaces it wholesale: a user's own mpv.conf `vd-lavc-o` entries must
+    // survive, with the app's keys last (FFmpeg keeps the last duplicate).
+    assertEquals(
+      "threads=4,dolby_vision=1",
+      MpvPlayerCore.mergeDecoderOptions("threads=4", "dolby_vision=1")
+    )
+    assertEquals("dolby_vision=1", MpvPlayerCore.mergeDecoderOptions(null, "dolby_vision=1"))
+    assertEquals("dolby_vision=1", MpvPlayerCore.mergeDecoderOptions("  ", "dolby_vision=1"))
+  }
+
  private fun awaitQueueEntry(
    queue: ConcurrentLinkedQueue<Pair<String, String>>,
    expected: Pair<String, String>
@@ -0,0 +1,72 @@
+package com.edde746.plezy.mpv
+
+import org.junit.Assert.assertEquals
+import org.junit.Assert.assertNull
+import org.junit.Assert.assertTrue
+import org.junit.Test
+
+class VideoRectPolicyTest {
+  @Test
+  fun `contain letterboxes wide content inside the container`() {
+    // 2.39:1 content on a 16:9 container: full width, bars top and bottom.
+    val size = VideoRectPolicy.sizeFor(1920, 1080, 2390, 1000)!!
+    assertEquals(1920, size.width)
+    assertEquals(803, size.height)
+    assertTrue(size.height < 1080)
+  }
+
+  @Test
+  fun `contain pillarboxes tall content inside the container`() {
+    val size = VideoRectPolicy.sizeFor(1920, 1080, 1000, 2390)!!
+    assertEquals(1080, size.height)
+    assertTrue(size.width < 1920)
+  }
+
+  @Test
+  fun `panscan 1 fills the container so the image is cropped, not letterboxed`() {
+    // The regression this exists for: cover used to be a no-op on the plane.
+    val size = VideoRectPolicy.sizeFor(1920, 1080, 2390, 1000, panscan = 1f)!!
+    assertTrue("cover must reach the container height", size.height >= 1080)
+    assertTrue("width must overflow and be clipped", size.width > 1920)
+  }
+
+  @Test
+  fun `panscan interpolates between contain and cover`() {
+    val contain = VideoRectPolicy.sizeFor(1920, 1080, 2390, 1000)!!
+    val half = VideoRectPolicy.sizeFor(1920, 1080, 2390, 1000, panscan = 0.5f)!!
+    val cover = VideoRectPolicy.sizeFor(1920, 1080, 2390, 1000, panscan = 1f)!!
+    assertTrue(half.height > contain.height)
+    assertTrue(half.height < cover.height)
+  }
+
+  @Test
+  fun `video-zoom is a log2 factor on top of the fit`() {
+    val base = VideoRectPolicy.sizeFor(1920, 1080, 1920, 1080)!!
+    val doubled = VideoRectPolicy.sizeFor(1920, 1080, 1920, 1080, videoZoomLog2 = 1f)!!
+    val halved = VideoRectPolicy.sizeFor(1920, 1080, 1920, 1080, videoZoomLog2 = -1f)!!
+    assertEquals(base.width * 2, doubled.width)
+    assertEquals(base.width / 2, halved.width)
+  }
+
+  @Test
+  fun `cover fills a container whose aspect is wildly mismatched`() {
+    // Scope content in a portrait container: cover/fit exceeds 4, which a
+    // fit-relative clamp would truncate back into letterboxing.
+    val size = VideoRectPolicy.sizeFor(1080, 2400, 2390, 1000, panscan = 1f)!!
+    assertTrue("height must reach the container", size.height >= 2400)
+  }
+
+  @Test
+  fun `an absurd zoom is bounded rather than allocating an unbounded surface`() {
+    val fit = VideoRectPolicy.sizeFor(1920, 1080, 1920, 1080)!!
+    val absurd = VideoRectPolicy.sizeFor(1920, 1080, 1920, 1080, videoZoomLog2 = 12f)!!
+    assertEquals(fit.width * 4, absurd.width)
+  }
+
+  @Test
+  fun `unknown dimensions yield no size instead of a degenerate one`() {
+    assertNull(VideoRectPolicy.sizeFor(0, 1080, 1920, 1080))
+    assertNull(VideoRectPolicy.sizeFor(1920, 1080, 0, 0))
+    assertNull(VideoRectPolicy.sizeFor(1920, 0, 1920, 1080))
+  }
+}
@@ -0,0 +1,94 @@
+package com.edde746.plezy.shared
+
+import android.app.Activity
+import android.os.Handler
+import android.os.Looper
+import java.time.Duration
+import org.junit.Assert.assertEquals
+import org.junit.Assert.assertNotEquals
+import org.junit.Test
+import org.junit.runner.RunWith
+import org.robolectric.Robolectric
+import org.robolectric.RobolectricTestRunner
+import org.robolectric.Shadows.shadowOf
+
+/**
+ * Teardown ordering for frame-rate matching (#2172): restoring the display
+ * mode while the display is still signaling HDR folds the HDR exit and the
+ * mode change into one slow HDMI renegotiation. An HDR session therefore
+ * defers the restore; an SDR session restores immediately.
+ */
+@RunWith(RobolectricTestRunner::class)
+class FrameRateManagerRestoreTest {
+
+  private fun buildManager(activity: Activity): FrameRateManager = FrameRateManager(activity, Handler(Looper.getMainLooper()))
+
+  private fun preferredModeId(activity: Activity): Int = activity.window.attributes.preferredDisplayModeId
+
+  private fun applyPreferredMode(activity: Activity, modeId: Int) {
+    val attrs = activity.window.attributes
+    attrs.preferredDisplayModeId = modeId
+    activity.window.attributes = attrs
+  }
+
+  @Test
+  fun sdrClearRestoresTheDefaultModeImmediately() {
+    val activity = Robolectric.buildActivity(Activity::class.java).setup().get()
+    val manager = buildManager(activity)
+    applyPreferredMode(activity, 4)
+
+    manager.clearVideoFrameRate(hdrActive = false)
+
+    assertEquals(0, preferredModeId(activity))
+  }
+
+  @Test
+  fun hdrClearDefersTheRestoreUntilTheHdrExitSettles() {
+    val activity = Robolectric.buildActivity(Activity::class.java).setup().get()
+    val manager = buildManager(activity)
+    applyPreferredMode(activity, 4)
+
+    manager.clearVideoFrameRate(hdrActive = true)
+
+    // Still at the content mode: the surface teardown must commit the HDR
+    // exit before the mode change renegotiates the link.
+    assertEquals(4, preferredModeId(activity))
+
+    shadowOf(Looper.getMainLooper()).idleFor(Duration.ofMillis(500))
+    assertEquals(0, preferredModeId(activity))
+  }
+
+  @Test
+  fun newSwitchRequestCancelsAPendingDeferredRestore() {
+    val activity = Robolectric.buildActivity(Activity::class.java).setup().get()
+    val manager = buildManager(activity)
+    applyPreferredMode(activity, 4)
+
+    manager.clearVideoFrameRate(hdrActive = true)
+    // A new session's request arrives before the deferred restore fires.
+    manager.setVideoFrameRate(fps = 23.976f, videoDurationMs = 0L, extraDelayMs = 0L) { }
+
+    shadowOf(Looper.getMainLooper()).idleFor(Duration.ofMillis(500))
+    // The stale restore must not clobber whatever the new request applied.
+    // (Robolectric's display has no matching mode, so the request itself
+    // leaves the window untouched; only the cancelled restore could zero it.)
+    assertNotEquals(0, preferredModeId(activity))
+  }
+
+  @Test
+  fun hdrClearWithNoAppliedModePostsNoRestore() {
+    val activity = Robolectric.buildActivity(Activity::class.java).setup().get()
+    val manager = buildManager(activity)
+    applyPreferredMode(activity, 7)
+
+    // Simulate "nothing applied by us": manager sees modeId 0.
+    applyPreferredMode(activity, 0)
+    manager.clearVideoFrameRate(hdrActive = true)
+
+    // A later, externally applied mode must not be clobbered by a stale
+    // deferred restore from a session that never switched.
+    applyPreferredMode(activity, 7)
+    shadowOf(Looper.getMainLooper()).idleFor(Duration.ofMillis(500))
+    assertEquals(7, preferredModeId(activity))
+  }
+}
@@ -1,5 +1,6 @@
 package com.edde746.plezy.shared

+import org.junit.Assert.assertEquals
 import org.junit.Assert.assertFalse
 import org.junit.Assert.assertTrue
 import org.junit.Test
@@ -60,4 +61,18 @@ class MediaCodecQueryTest {
    assertFalse(MediaCodecQuery.isHardwareAccelerated(28, true, "OMX.google.h264.decoder"))
    assertTrue(MediaCodecQuery.isHardwareAccelerated(28, false, "OMX.qcom.video.decoder.avc"))
  }
+
+  @Test
+  fun mapsGatedCodecsToTheMimeTypesDecodersAdvertise() {
+    assertEquals(
+      mapOf("hevc" to true, "av1" to true),
+      MediaCodecQuery.hardwareVideoDecodeSupport(
+        setOf("video/avc", "video/hevc", "video/av01", "audio/mp4a-latm")
+      )
+    )
+    assertEquals(
+      mapOf("hevc" to true, "av1" to false),
+      MediaCodecQuery.hardwareVideoDecodeSupport(setOf("video/avc", "video/hevc"))
+    )
+  }
 }
@@ -4,6 +4,7 @@ import android.app.Activity
 import android.graphics.Color
 import android.graphics.drawable.ColorDrawable
 import android.view.SurfaceHolder
+import android.view.SurfaceView
 import android.view.ViewGroup
 import android.widget.FrameLayout
 import org.junit.Assert.assertEquals
@@ -41,4 +42,27 @@ class PlayerSurfaceHostTest {
    assertEquals(FrameLayout.LayoutParams.MATCH_PARENT, surface.layoutParams.width)
    assertEquals(FrameLayout.LayoutParams.MATCH_PARENT, surface.layoutParams.height)
  }
+
+  @Test
+  fun letterboxAreaIsCoveredByABufferlessPunchSurfaceBeneathTheVideo() {
+    val activity = Robolectric.buildActivity(Activity::class.java).setup().get()
+    activity.setContentView(FrameLayout(activity))
+    val callback = object : SurfaceHolder.Callback {
+      override fun surfaceCreated(holder: SurfaceHolder) = Unit
+      override fun surfaceChanged(holder: SurfaceHolder, format: Int, width: Int, height: Int) = Unit
+      override fun surfaceDestroyed(holder: SurfaceHolder) = Unit
+    }
+
+    val container = PlayerSurfaceHost.createContainer(activity)
+    val punch = container.getChildAt(0)
+    assertTrue(punch is SurfaceView)
+    assertEquals(FrameLayout.LayoutParams.MATCH_PARENT, punch.layoutParams.width)
+    assertEquals(FrameLayout.LayoutParams.MATCH_PARENT, punch.layoutParams.height)
+
+    // Cores append their surfaces after createContainer, so video (and the mpv
+    // OSD plane) always land above the punch layer in drawing order.
+    val video = PlayerSurfaceHost.createVideoSurface(activity, callback)
+    container.addView(video)
+    assertTrue(container.indexOfChild(video) > container.indexOfChild(punch))
+  }
 }
@@ -12,7 +12,7 @@ android {
  compileSdk = 36
  // Matches the app's latest stable NDK so every project-owned native library
  // is built with the same 16 KB page-size-capable libc++ toolchain. That copy
-  // is NOT what ships: the app packages the libmpv AAR's newer copy with top
+  // is NOT what ships: the app packages the mpv-build tarball's newer copy with top
  // merge priority (see app/build.gradle.kts packaging { jniLibs } + sourceSets).
  ndkVersion = "29.0.14206865"

@@ -58,6 +58,4 @@ dependencies {
  implementation("androidx.media3:media3-ui:1.11.0")

  testImplementation("junit:junit:4.13.2")
-  // media3 Format/MimeTypes touch android.util in static initializers.
-  testImplementation("org.robolectric:robolectric:4.16.1")
 }
@@ -1,31 +0,0 @@
-package com.edde746.plezy.libass.media
-
-/**
- * Shared policy for embedded font attachments delivered to libass: which
- * attachment mime types are fonts, and the per-font/aggregate byte budgets
- * that keep a hostile container from ballooning the font store.
- */
-object AssFonts {
-  const val MAX_FONT_BYTES = 16L * 1024 * 1024
-  const val MAX_TOTAL_FONT_BYTES = 32L * 1024 * 1024
-
-  val fontMimeTypes = listOf(
-    "font/ttf",
-    "font/otf",
-    "font/sfnt",
-    "font/woff",
-    "font/woff2",
-    "application/font-sfnt",
-    "application/font-woff",
-    "application/x-truetype-font",
-    "application/vnd.ms-opentype",
-    "application/x-font-ttf"
-  )
-
-  /** Null to accept the font, or a human-readable rejection reason. */
-  fun rejectionReason(size: Long, acceptedBytes: Long): String? = when {
-    size > MAX_FONT_BYTES -> "per-font limit"
-    size > MAX_TOTAL_FONT_BYTES - acceptedBytes -> "aggregate limit"
-    else -> null
-  }
-}
@@ -0,0 +1,169 @@
+package com.edde746.plezy.libass.media.extractor
+
+import android.util.Log
+import androidx.annotation.OptIn
+import androidx.media3.common.ParserException
+import androidx.media3.common.util.ParsableByteArray
+import androidx.media3.common.util.UnstableApi
+import androidx.media3.extractor.ExtractorInput
+import androidx.media3.extractor.ExtractorOutput
+import androidx.media3.extractor.mkv.EbmlProcessor
+import androidx.media3.extractor.mkv.MatroskaExtractor
+import androidx.media3.extractor.text.SubtitleParser
+import com.edde746.plezy.libass.media.AssHandler
+import com.edde746.plezy.libass.media.text.AssSubtitleExtractorOutput
+
+@OptIn(UnstableApi::class)
+open class AssMatroskaExtractor(
+  subtitleParserFactory: SubtitleParser.Factory,
+  private val assHandler: AssHandler,
+  flags: Int = 0
+) : MatroskaExtractor(subtitleParserFactory, flags) {
+
+  private var currentAttachmentName: String? = null
+  private var currentAttachmentMime: String? = null
+  internal var acceptedFontBytes = 0L
+    private set
+
+  internal val subtitleSample = subtitleSampleField.get(this) as ParsableByteArray
+
+  override fun getElementType(id: Int): Int = when (id) {
+    ID_ATTACHMENTS -> EbmlProcessor.ELEMENT_TYPE_MASTER
+    ID_ATTACHED_FILE -> EbmlProcessor.ELEMENT_TYPE_MASTER
+    ID_FILE_NAME -> EbmlProcessor.ELEMENT_TYPE_STRING
+    ID_FILE_MIME_TYPE -> EbmlProcessor.ELEMENT_TYPE_STRING
+    ID_FILE_DATA -> EbmlProcessor.ELEMENT_TYPE_BINARY
+    else -> super.getElementType(id)
+  }
+
+  override fun isLevel1Element(id: Int): Boolean = super.isLevel1Element(id) || id == ID_ATTACHMENTS
+
+  override fun startMasterElement(id: Int, contentPosition: Long, contentSize: Long) {
+    when (id) {
+      ID_EBML -> {
+        val currentExtractor = extractorOutput.get(this) as ExtractorOutput
+        if (currentExtractor !is AssSubtitleExtractorOutput) {
+          extractorOutput.set(
+            this,
+            AssSubtitleExtractorOutput(currentExtractor, assHandler, this)
+          )
+        }
+        super.startMasterElement(id, contentPosition, contentSize)
+      }
+      ID_ATTACHED_FILE -> clearAttachment()
+      else -> super.startMasterElement(id, contentPosition, contentSize)
+    }
+  }
+
+  override fun endMasterElement(id: Int) {
+    when (id) {
+      ID_VIDEO -> {
+        // We need to get the video dimensions very early
+        val track = getCurrentTrack(id)
+        assHandler.setVideoSize(track.width, track.height)
+        super.endMasterElement(id)
+      }
+      ID_ATTACHED_FILE -> clearAttachment()
+      else -> super.endMasterElement(id)
+    }
+  }
+
+  override fun stringElement(id: Int, value: String) {
+    when (id) {
+      ID_FILE_NAME -> currentAttachmentName = value
+      ID_FILE_MIME_TYPE -> currentAttachmentMime = value
+      else -> super.stringElement(id, value)
+    }
+  }
+
+  override fun binaryElement(id: Int, contentSize: Int, input: ExtractorInput) {
+    when (id) {
+      ID_FILE_DATA -> {
+        if (contentSize < 0) {
+          throw ParserException.createForMalformedContainer(
+            "Negative Matroska attachment size",
+            null
+          )
+        }
+
+        val attachmentName = requireNotNull(currentAttachmentName)
+        val attachmentMime = requireNotNull(currentAttachmentMime)
+        if (attachmentMime !in fontMimeTypes) {
+          input.skipFully(contentSize)
+          return
+        }
+        if (contentSize == 0) {
+          input.skipFully(0)
+          return
+        }
+
+        val size = contentSize.toLong()
+        val rejectionReason = when {
+          size > MAX_FONT_BYTES -> "per-font limit"
+          size > MAX_TOTAL_FONT_BYTES - acceptedFontBytes -> "aggregate limit"
+          else -> null
+        }
+        if (rejectionReason != null) {
+          onFontRejected(contentSize, acceptedFontBytes, rejectionReason)
+          input.skipFully(contentSize)
+          return
+        }
+
+        val data = ByteArray(contentSize)
+        input.readFully(data, 0, contentSize)
+        acceptedFontBytes += size
+        assHandler.addFont(attachmentName, data)
+      }
+      else -> super.binaryElement(id, contentSize, input)
+    }
+  }
+
+  protected open fun onFontRejected(
+    contentSize: Int,
+    acceptedBytes: Long,
+    reason: String
+  ) {
+    Log.w(
+      TAG,
+      "Skipping embedded font: $reason (bytes=$contentSize, accepted=$acceptedBytes)"
+    )
+  }
+
+  private fun clearAttachment() {
+    currentAttachmentName = null
+    currentAttachmentMime = null
+  }
+
+  companion object {
+    private const val TAG = "AssMatroskaExtractor"
+    internal const val MAX_FONT_BYTES = 16L * 1024 * 1024
+    internal const val MAX_TOTAL_FONT_BYTES = 32L * 1024 * 1024
+    const val ID_EBML = 0x1A45DFA3
+    const val ID_VIDEO = 0xE0
+    const val ID_ATTACHMENTS = 0x1941A469
+    const val ID_ATTACHED_FILE = 0x61A7
+    const val ID_FILE_NAME = 0x466E
+    const val ID_FILE_MIME_TYPE = 0x4660
+    const val ID_FILE_DATA = 0x465C
+
+    val fontMimeTypes = listOf(
+      "font/ttf",
+      "font/otf",
+      "font/sfnt",
+      "font/woff",
+      "font/woff2",
+      "application/font-sfnt",
+      "application/font-woff",
+      "application/x-truetype-font",
+      "application/vnd.ms-opentype",
+      "application/x-font-ttf"
+    )
+
+    val extractorOutput = MatroskaExtractor::class.java.getDeclaredField("extractorOutput").apply {
+      isAccessible = true
+    }
+    val subtitleSampleField = MatroskaExtractor::class.java.getDeclaredField("subtitleSample").apply {
+      isAccessible = true
+    }
+  }
+}
@@ -5,22 +5,21 @@ import androidx.media3.common.util.UnstableApi
 import androidx.media3.extractor.ExtractorOutput
 import androidx.media3.extractor.TrackOutput
 import com.edde746.plezy.libass.media.AssHandler
+import com.edde746.plezy.libass.media.extractor.AssMatroskaExtractor

 /**
- * Wraps every text track with [AssTrackOutput] so embedded ASS dialogue
- * reaches libass. Install it on the raw-subtitle side of the output chain —
- * between the extractor and the SubtitleTranscodingExtractorOutput — so the
- * dialogue bytes are still unparsed when they pass through.
+ * This class is only used by the overlay renderer. It's needed to get the start time of the subtitles.
 */
@UnstableApi
 class AssSubtitleExtractorOutput(
  private val delegate: ExtractorOutput,
-  private val assHandler: AssHandler
+  private val assHandler: AssHandler,
+  private val extractor: AssMatroskaExtractor
 ) : ExtractorOutput by delegate {
  override fun track(id: Int, type: Int): TrackOutput = if (type == C.TRACK_TYPE_TEXT) {
-    // We can't know at this time if the subtitle track is ASS or another
-    // format, so we wrap every subtitle track; non-ASS tracks pass through.
-    AssTrackOutput(delegate.track(id, type), assHandler::readTrackDialogue)
+    // We can't know at this time if the subtitle track is ASS or other format, so we wrap
+    // every subtitle track
+    AssTrackOutput(delegate.track(id, type), assHandler, extractor)
  } else {
    delegate.track(id, type)
  }
@@ -1,49 +1,28 @@
 package com.edde746.plezy.libass.media.text

 import androidx.media3.common.C
-import androidx.media3.common.DataReader
 import androidx.media3.common.Format
 import androidx.media3.common.MimeTypes
-import androidx.media3.common.util.ParsableByteArray
 import androidx.media3.common.util.UnstableApi
 import androidx.media3.common.util.Util
 import androidx.media3.extractor.TrackOutput
-import java.io.EOFException
+import com.edde746.plezy.libass.media.AssHandler
+import com.edde746.plezy.libass.media.extractor.AssMatroskaExtractor
 import java.util.regex.Pattern

 /**
- * Feeds embedded ASS dialogue to libass while forwarding every sample
- * unchanged. Only used by the overlay renderer, which needs the start time and
- * duration of each dialogue line.
- *
- * Samples must arrive in the media3 MatroskaExtractor subtitle shape
- * `Dialogue: 0:00:00:00,<duration timecode>,<ReadOrder,Layer,Style,...>` — the
- * second field carries the sample *duration* (MatroskaExtractor patches
- * BlockDuration into it; the FFmpeg extractor writes the packet duration).
- * The extractor beneath must therefore emit raw subtitle samples: media3's
- * MatroskaExtractor with FLAG_EMIT_RAW_SUBTITLE_DATA, or the FFmpeg demuxer
- * path. Cue transcoding happens downstream of this wrapper.
+ * This class is only used by the overlay renderer. It's needed to get the start time of the subtitles.
 */
@UnstableApi
 class AssTrackOutput(
  private val delegate: TrackOutput,
-  private val dialogueSink: DialogueSink
-) : TrackOutput {
-
-  /** Receives one dialogue line; mirrors AssHandler.readTrackDialogue. */
-  fun interface DialogueSink {
-    fun onDialogue(trackId: String?, startMs: Long, durationMs: Long, data: ByteArray, offset: Int, length: Int)
-  }
+  private val assHandler: AssHandler,
+  private val extractor: AssMatroskaExtractor
+) : TrackOutput by delegate {

  private var isAss = false
-  private var trackId: String? = null

-  // Sample bytes buffered between sampleData and sampleMetadata; only
-  // populated for ASS tracks.
-  private var buf = ByteArray(INITIAL_BUFFER_SIZE)
-  private var bufLen = 0
-  private var readBuf = ByteArray(INITIAL_BUFFER_SIZE)
-  private val forwardParsable = ParsableByteArray()
+  private var trackId: String? = null

  override fun format(format: Format) {
    if (format.sampleMimeType == MimeTypes.TEXT_SSA || format.codecs == MimeTypes.TEXT_SSA) {
@@ -53,34 +32,6 @@ class AssTrackOutput(
    delegate.format(format)
  }

-  override fun sampleData(
-    input: DataReader,
-    length: Int,
-    allowEndOfInput: Boolean,
-    sampleDataPart: Int
-  ): Int {
-    if (!isAss) return delegate.sampleData(input, length, allowEndOfInput, sampleDataPart)
-    if (readBuf.size < length) readBuf = ByteArray(length)
-    val bytesRead = input.read(readBuf, 0, length)
-    if (bytesRead == C.RESULT_END_OF_INPUT) {
-      if (!allowEndOfInput) throw EOFException()
-      return C.RESULT_END_OF_INPUT
-    }
-    append(readBuf, bytesRead)
-    forwardParsable.reset(readBuf, bytesRead)
-    delegate.sampleData(forwardParsable, bytesRead, sampleDataPart)
-    return bytesRead
-  }
-
-  override fun sampleData(data: ParsableByteArray, length: Int, sampleDataPart: Int) {
-    if (isAss) {
-      ensureCapacity(bufLen + length)
-      System.arraycopy(data.data, data.position, buf, bufLen, length)
-      bufLen += length
-    }
-    delegate.sampleData(data, length, sampleDataPart)
-  }
-
  override fun sampleMetadata(
    timeUs: Long,
    flags: Int,
@@ -88,37 +39,26 @@ class AssTrackOutput(
    offset: Int,
    cryptoData: TrackOutput.CryptoData?
  ) {
-    if (isAss) {
-      // offset counts bytes buffered after this sample; the slice math matches
-      // media3's TrackOutput contract even though subtitle samples are
-      // normally delivered one at a time with offset 0.
-      val start = bufLen - offset - size
-      if (timeUs != C.TIME_UNSET && start >= 0) {
-        feedDialogue(timeUs, start, size)
-      }
-      if (offset == 0) bufLen = 0
+    if (isAss && timeUs.isValidTs) {
+      val sample = extractor.subtitleSample
+      val endIndex = findTokenIndex(sample.data, 1)
+      val lineIndex = findTokenIndex(sample.data, 2)
+
+      val rawDuration = sample.data.decodeToString(endIndex, lineIndex - 1)
+      val durationUs = parseTimecodeUs(rawDuration)
+
+      assHandler.readTrackDialogue(
+        trackId = trackId,
+        start = timeUs / 1000,
+        duration = durationUs / 1000,
+        data = sample.data,
+        offset = lineIndex,
+        length = sample.limit() - lineIndex
+      )
    }
    delegate.sampleMetadata(timeUs, flags, size, offset, cryptoData)
  }

-  private fun feedDialogue(timeUs: Long, start: Int, size: Int) {
-    val end = start + size
-    val durationIndex = findTokenIndex(start, end, 1)
-    val lineIndex = findTokenIndex(start, end, 2)
-    if (durationIndex <= start || lineIndex <= durationIndex) return
-    val rawDuration = buf.decodeToString(durationIndex, lineIndex - 1)
-    val durationUs = parseTimecodeUs(rawDuration)
-    if (durationUs == C.TIME_UNSET) return
-    dialogueSink.onDialogue(
-      trackId,
-      timeUs / 1000,
-      durationUs / 1000,
-      buf,
-      lineIndex,
-      end - lineIndex
-    )
-  }
-
  private fun parseTimecodeUs(timeString: String): Long {
    val matcher = SSA_TIMECODE_PATTERN.matcher(timeString.trim { it <= ' ' })
    if (!matcher.matches()) {
@@ -132,32 +72,24 @@ class AssTrackOutput(
    return timestampUs
  }

-  /** Index just past the [tokenNumber]th comma inside [from, to), or [from]. */
-  private fun findTokenIndex(from: Int, to: Int, tokenNumber: Int): Int {
+  private fun findTokenIndex(array: ByteArray, tokenNumber: Int): Int {
+    if (tokenNumber == 0) return 0
    var tokensFound = 0
-    for (index in from until to) {
-      if (buf[index] == COMMA && ++tokensFound == tokenNumber) {
+    array.forEachIndexed { index, byte ->
+      if (byte == COMMA && ++tokensFound == tokenNumber) {
        return index + 1
      }
    }
-    return from
+    return 0
  }

-  private fun append(src: ByteArray, length: Int) {
-    ensureCapacity(bufLen + length)
-    System.arraycopy(src, 0, buf, bufLen, length)
-    bufLen += length
-  }
-
-  private fun ensureCapacity(needed: Int) {
-    if (buf.size < needed) buf = buf.copyOf(maxOf(needed, buf.size * 2))
-  }
+  private val Long.isValidTs
+    get() = this != C.TIME_UNSET

  private companion object {
    val SSA_TIMECODE_PATTERN: Pattern =
      Pattern.compile("""(?:(\d+):)?(\d+):(\d+)[:.](\d+)""")

    const val COMMA = ','.code.toByte()
-    const val INITIAL_BUFFER_SIZE = 1024
  }
 }
@@ -0,0 +1,156 @@
+package com.edde746.plezy.libass.media.extractor
+
+import androidx.media3.common.C
+import androidx.media3.common.DataReader
+import androidx.media3.common.ParserException
+import androidx.media3.extractor.DefaultExtractorInput
+import androidx.media3.extractor.ExtractorInput
+import androidx.media3.extractor.text.DefaultSubtitleParserFactory
+import com.edde746.plezy.libass.media.AssHandler
+import java.io.EOFException
+import org.junit.Assert.assertArrayEquals
+import org.junit.Assert.assertEquals
+import org.junit.Assert.assertThrows
+import org.junit.Test
+
+class AssMatroskaExtractorTest {
+
+  @Test
+  fun smallFontIsDeliveredAndNonFontDoesNotConsumeBudget() {
+    val handler = AssHandler()
+    val extractor = extractor(handler)
+
+    attachment(extractor, "font/ttf")
+    extractor.fileData(4, input(4, seed = 11))
+    attachment(extractor, "application/octet-stream")
+    extractor.fileData(9, input(9, seed = 22))
+
+    val pending = handler.fontStore.pendingSnapshot()
+    assertEquals(1, pending.size)
+    assertEquals("fixture-font", pending.single().first)
+    assertArrayEquals(byteArrayOf(11, 12, 13, 14), pending.single().second)
+    assertEquals(4L, extractor.acceptedFontBytes)
+  }
+
+  @Test
+  fun perFontLimitAcceptsExactBoundaryAndSkipsOneByteOver() {
+    val handler = AssHandler()
+    val extractor = extractor(handler)
+    val limit = AssMatroskaExtractor.MAX_FONT_BYTES.toInt()
+
+    attachment(extractor, "font/otf")
+    extractor.fileData(limit, input(limit))
+    attachment(extractor, "font/otf")
+    extractor.fileData(limit + 1, input(limit + 1))
+
+    assertEquals(limit.toLong(), extractor.acceptedFontBytes)
+    assertEquals(1, handler.fontStore.pendingSnapshot().size)
+  }
+
+  @Test
+  fun aggregateLimitIsDeterministicAcrossAttachmentEntries() {
+    val handler = AssHandler()
+    val extractor = extractor(handler)
+    val perFont = AssMatroskaExtractor.MAX_FONT_BYTES.toInt()
+
+    repeat(2) {
+      attachment(extractor, "font/ttf")
+      extractor.fileData(perFont, input(perFont, seed = it))
+      extractor.endAttachment()
+    }
+    attachment(extractor, "font/ttf")
+    extractor.fileData(1, input(1))
+
+    assertEquals(AssMatroskaExtractor.MAX_TOTAL_FONT_BYTES, extractor.acceptedFontBytes)
+    assertEquals(2, handler.fontStore.pendingSnapshot().size)
+  }
+
+  @Test
+  fun negativeAndZeroSizesAllocateAndDeliverNothing() {
+    val handler = AssHandler()
+    val extractor = extractor(handler)
+    attachment(extractor, "font/woff2")
+
+    assertThrows(ParserException::class.java) {
+      extractor.fileData(-1, input(0))
+    }
+    attachment(extractor, "font/woff2")
+    extractor.fileData(0, input(0))
+
+    assertEquals(0L, extractor.acceptedFontBytes)
+    assertEquals(0, handler.fontStore.pendingSnapshot().size)
+  }
+
+  @Test
+  fun failedReadDoesNotChargeAggregateBudgetOrDeliverPartialFont() {
+    val handler = AssHandler()
+    val extractor = extractor(handler)
+    attachment(extractor, "font/ttf")
+
+    assertThrows(EOFException::class.java) {
+      extractor.fileData(1024, input(1024, available = 4))
+    }
+    assertEquals(0L, extractor.acceptedFontBytes)
+    assertEquals(0, handler.fontStore.pendingSnapshot().size)
+
+    attachment(extractor, "font/ttf")
+    extractor.fileData(1024, input(1024))
+    assertEquals(1024L, extractor.acceptedFontBytes)
+    assertEquals(1, handler.fontStore.pendingSnapshot().size)
+  }
+
+  private fun extractor(handler: AssHandler) = TestExtractor(handler)
+
+  private fun attachment(extractor: TestExtractor, mime: String) {
+    extractor.setAttachment(mime)
+  }
+
+  private class TestExtractor(handler: AssHandler) :
+    AssMatroskaExtractor(
+      DefaultSubtitleParserFactory(),
+      handler
+    ) {
+    fun setAttachment(mime: String) {
+      startMasterElement(ID_ATTACHED_FILE, 0, 0)
+      stringElement(ID_FILE_NAME, "fixture-font")
+      stringElement(ID_FILE_MIME_TYPE, mime)
+    }
+
+    fun fileData(contentSize: Int, input: ExtractorInput) {
+      binaryElement(ID_FILE_DATA, contentSize, input)
+    }
+
+    fun endAttachment() {
+      endMasterElement(ID_ATTACHED_FILE)
+    }
+
+    override fun onFontRejected(contentSize: Int, acceptedBytes: Long, reason: String) = Unit
+  }
+
+  private fun input(
+    declared: Int,
+    available: Int = declared,
+    seed: Int = 0
+  ): ExtractorInput = DefaultExtractorInput(
+    PatternDataReader(available, seed),
+    0,
+    declared.toLong()
+  )
+
+  private class PatternDataReader(
+    private val size: Int,
+    private val seed: Int
+  ) : DataReader {
+    private var position = 0
+
+    override fun read(buffer: ByteArray, offset: Int, length: Int): Int {
+      if (position >= size) return C.RESULT_END_OF_INPUT
+      val count = minOf(length, size - position)
+      for (index in 0 until count) {
+        buffer[offset + index] = ((seed + position + index) and 0xFF).toByte()
+      }
+      position += count
+      return count
+    }
+  }
+}
@@ -1,157 +0,0 @@
-package com.edde746.plezy.libass.media.text
-
-import androidx.media3.common.C
-import androidx.media3.common.Format
-import androidx.media3.common.MimeTypes
-import androidx.media3.common.util.ParsableByteArray
-import androidx.media3.extractor.TrackOutput
-import org.junit.Assert.assertArrayEquals
-import org.junit.Assert.assertEquals
-import org.junit.Assert.assertTrue
-import org.junit.Test
-import org.junit.runner.RunWith
-import org.robolectric.RobolectricTestRunner
-import org.robolectric.annotation.Config
-
-/**
- * Spec for the dialogue feed both demuxer paths rely on: samples arrive in
- * media3's MatroskaExtractor shape ("Dialogue: 0:00:00:00,<duration>,<rest>")
- * and the sink must receive the sample start, the parsed duration, and the
- * payload after the second comma — while every byte is still forwarded
- * unchanged to the delegate.
- */
-@RunWith(RobolectricTestRunner::class)
-@Config(sdk = [34])
-class AssTrackOutputTest {
-
-  private class CapturedDialogue(val trackId: String?, val startMs: Long, val durationMs: Long, val line: ByteArray)
-
-  private class RecordingSink : AssTrackOutput.DialogueSink {
-    val dialogues = mutableListOf<CapturedDialogue>()
-
-    override fun onDialogue(trackId: String?, startMs: Long, durationMs: Long, data: ByteArray, offset: Int, length: Int) {
-      dialogues.add(CapturedDialogue(trackId, startMs, durationMs, data.copyOfRange(offset, offset + length)))
-    }
-  }
-
-  private class RecordingTrackOutput : TrackOutput {
-    val formats = mutableListOf<Format>()
-    val samples = mutableListOf<ByteArray>()
-    val sampleTimes = mutableListOf<Long>()
-    private var buf = ByteArray(1024)
-    private var bufLen = 0
-
-    override fun format(format: Format) {
-      formats.add(format)
-    }
-
-    override fun sampleData(input: androidx.media3.common.DataReader, length: Int, allowEndOfInput: Boolean, sampleDataPart: Int): Int {
-      if (buf.size < bufLen + length) buf = buf.copyOf(bufLen + length)
-      val read = input.read(buf, bufLen, length)
-      if (read > 0) bufLen += read
-      return read
-    }
-
-    override fun sampleData(data: ParsableByteArray, length: Int, sampleDataPart: Int) {
-      if (buf.size < bufLen + length) buf = buf.copyOf(bufLen + length)
-      data.readBytes(buf, bufLen, length)
-      bufLen += length
-    }
-
-    override fun sampleMetadata(timeUs: Long, flags: Int, size: Int, offset: Int, cryptoData: TrackOutput.CryptoData?) {
-      val start = bufLen - offset - size
-      samples.add(buf.copyOfRange(start, start + size))
-      sampleTimes.add(timeUs)
-      if (offset == 0) bufLen = 0
-    }
-  }
-
-  private fun ssaFormat(id: String = "3"): Format = Format.Builder()
-    .setId(id)
-    .setSampleMimeType(MimeTypes.TEXT_SSA)
-    .build()
-
-  private fun deliver(output: AssTrackOutput, sample: String, timeUs: Long) {
-    val bytes = sample.toByteArray(Charsets.UTF_8)
-    output.sampleData(ParsableByteArray(bytes), bytes.size, TrackOutput.SAMPLE_DATA_PART_MAIN)
-    output.sampleMetadata(timeUs, C.BUFFER_FLAG_KEY_FRAME, bytes.size, 0, null)
-  }
-
-  @Test
-  fun feedsDialogueAndForwardsSampleUnchanged() {
-    val sink = RecordingSink()
-    val delegate = RecordingTrackOutput()
-    val output = AssTrackOutput(delegate, sink)
-    output.format(ssaFormat())
-
-    val sample = "Dialogue: 0:00:00:00,0:00:05:00,7,0,Default,,0,0,0,,Hello, world"
-    deliver(output, sample, 90_000_000L)
-
-    assertEquals(1, sink.dialogues.size)
-    val dialogue = sink.dialogues.first()
-    assertEquals("3", dialogue.trackId)
-    assertEquals(90_000L, dialogue.startMs)
-    assertEquals(5_000L, dialogue.durationMs)
-    // Payload after the second comma: the raw MKV/FFmpeg block, commas in the
-    // text field intact.
-    assertEquals("7,0,Default,,0,0,0,,Hello, world", dialogue.line.toString(Charsets.UTF_8))
-
-    // The delegate still receives the full untouched sample.
-    assertEquals(1, delegate.samples.size)
-    assertArrayEquals(sample.toByteArray(Charsets.UTF_8), delegate.samples.first())
-    assertEquals(90_000_000L, delegate.sampleTimes.first())
-  }
-
-  @Test
-  fun ignoresNonAssTracksAndMalformedSamples() {
-    val sink = RecordingSink()
-    val delegate = RecordingTrackOutput()
-    val output = AssTrackOutput(delegate, sink)
-
-    // SubRip track: forwarded, never fed to libass.
-    output.format(Format.Builder().setId("1").setSampleMimeType(MimeTypes.APPLICATION_SUBRIP).build())
-    deliver(output, "1\n00:00:00,000 --> 00:00:05,000\nplain text", 1_000_000L)
-    assertTrue(sink.dialogues.isEmpty())
-    assertEquals(1, delegate.samples.size)
-
-    // ASS track with an unparseable duration: forwarded, not fed.
-    val assOutput = AssTrackOutput(RecordingTrackOutput(), sink)
-    assOutput.format(ssaFormat())
-    deliver(assOutput, "Dialogue: bogus", 1_000_000L)
-    assertTrue(sink.dialogues.isEmpty())
-  }
-
-  @Test
-  fun handlesChunkedSampleDataAndDataReaderPath() {
-    val sink = RecordingSink()
-    val delegate = RecordingTrackOutput()
-    val output = AssTrackOutput(delegate, sink)
-    output.format(ssaFormat("0"))
-
-    val sample = "Dialogue: 0:00:00:00,0:00:01:50,1,0,Style,,0,0,0,,Line"
-    val bytes = sample.toByteArray(Charsets.UTF_8)
-    val split = bytes.size / 2
-    output.sampleData(ParsableByteArray(bytes.copyOfRange(0, split)), split, TrackOutput.SAMPLE_DATA_PART_MAIN)
-    val rest = bytes.copyOfRange(split, bytes.size)
-    var consumed = 0
-    val reader = androidx.media3.common.DataReader { buffer, offset, length ->
-      if (consumed >= rest.size) {
-        C.RESULT_END_OF_INPUT
-      } else {
-        val toRead = minOf(length, rest.size - consumed)
-        System.arraycopy(rest, consumed, buffer, offset, toRead)
-        consumed += toRead
-        toRead
-      }
-    }
-    while (consumed < rest.size) {
-      output.sampleData(reader, rest.size - consumed, false, TrackOutput.SAMPLE_DATA_PART_MAIN)
-    }
-    output.sampleMetadata(0L, C.BUFFER_FLAG_KEY_FRAME, bytes.size, 0, null)
-
-    assertEquals(1, sink.dialogues.size)
-    assertEquals(1_500L, sink.dialogues.first().durationMs)
-    assertEquals("1,0,Style,,0,0,0,,Line", sink.dialogues.first().line.toString(Charsets.UTF_8))
-    assertArrayEquals(bytes, delegate.samples.first())
-  }
-}
@@ -0,0 +1,292 @@
+import java.nio.file.Files
+import java.nio.file.StandardCopyOption
+import java.security.MessageDigest
+import java.util.UUID
+import org.jetbrains.kotlin.gradle.dsl.JvmTarget
+
+fun verifySha256(file: File, expected: String, identity: String) {
+  val digest = MessageDigest.getInstance("SHA-256")
+  file.inputStream().buffered().use { input ->
+    val buffer = ByteArray(DEFAULT_BUFFER_SIZE)
+    while (true) {
+      val count = input.read(buffer)
+      if (count < 0) break
+      digest.update(buffer, 0, count)
+    }
+  }
+  val actual = digest.digest().joinToString("") {
+    (it.toInt() and 0xff).toString(16).padStart(2, '0')
+  }
+  if (actual != expected) {
+    throw GradleException("SHA-256 mismatch for $identity: expected $expected, got $actual")
+  }
+}
+
+fun promoteDirectory(staging: File, destination: File) {
+  val backup = File(destination.parentFile, "${destination.name}.backup-${UUID.randomUUID()}")
+  val hadDestination = destination.exists()
+  try {
+    if (hadDestination) {
+      Files.move(destination.toPath(), backup.toPath(), StandardCopyOption.ATOMIC_MOVE)
+    }
+    try {
+      Files.move(staging.toPath(), destination.toPath(), StandardCopyOption.ATOMIC_MOVE)
+    } catch (promotionFailure: Exception) {
+      if (hadDestination && backup.exists()) {
+        try {
+          Files.move(backup.toPath(), destination.toPath(), StandardCopyOption.ATOMIC_MOVE)
+        } catch (restoreFailure: Exception) {
+          promotionFailure.addSuppressed(restoreFailure)
+        }
+      }
+      throw promotionFailure
+    }
+    if (hadDestination && backup.exists() && !backup.deleteRecursively()) {
+      throw GradleException("Failed to remove obsolete native artifact backup at ${backup.absolutePath}")
+    }
+  } finally {
+    staging.deleteRecursively()
+  }
+}
+
+// mpv Kotlin API + JNI glue built in-project (imported from the libmpv-android
+// fork, commit e60c3ba); the external dependency is reduced to prebuilt native
+// trees carried by the mpv-build per-ABI tarballs pinned below.
+plugins {
+  id("com.android.library")
+  id("org.jetbrains.kotlin.android")
+}
+
+// Single source for the pinned native artifacts: the repo-root
+// mpv-build.lock.json (github.com/edde746/mpv-build release assets + sha256
+// checksums). This module downloads and extracts them; app/build.gradle.kts
+// reads FFmpeg .so files and the libc++ runtime back out of the extracted
+// trees.
+val mpvAbis = listOf("arm64-v8a", "armeabi-v7a", "x86", "x86_64")
+val mpvLockFile = rootProject.file("../mpv-build.lock.json")
+val mpvLockAndroid = run {
+  @Suppress("UNCHECKED_CAST")
+  val lock = groovy.json.JsonSlurper().parse(mpvLockFile) as Map<String, Any?>
+  @Suppress("UNCHECKED_CAST")
+  ((lock["artifacts"] as? Map<String, Any?>)?.get("android") as? Map<String, Any?>)
+    ?: throw GradleException("$mpvLockFile has no artifacts.android section")
+}
+val mpvKey = mpvLockAndroid["key"] as? String
+  ?: throw GradleException("$mpvLockFile artifacts.android.key is missing")
+val mpvAssetBase = mpvLockAndroid["assetBase"] as? String
+  ?: throw GradleException("$mpvLockFile artifacts.android.assetBase is missing")
+
+@Suppress("UNCHECKED_CAST")
+val mpvAssets = (mpvLockAndroid["assets"] as? Map<String, Map<String, String>>).let { assets ->
+  val missing = mpvAbis.filter { assets?.get(it)?.get("asset").isNullOrEmpty() || assets?.get(it)?.get("checksum").isNullOrEmpty() }
+  if (assets == null || missing.isNotEmpty()) {
+    throw GradleException("$mpvLockFile artifacts.android.assets lacks asset+checksum for: ${missing.joinToString()}")
+  }
+  assets
+}
+
+val mpvDir = layout.buildDirectory.dir("libmpv").get().asFile
+val mpvArchivesDir = File(mpvDir, "archives")
+val mpvNativeDir = File(mpvDir, "native")
+val mpvLibcxxDir = File(mpvDir, "libcxx")
+
+// Downloaded archives are renamed to a key-independent name so a lock bump
+// (new key) changes task inputs, not the output file set.
+fun stagedArchiveName(abi: String) = "libmpv-android-$abi.tar.gz"
+
+// Dev-only escape hatch: point the build at a directory of locally built
+// mpv-build android tarballs (platforms/android output, one
+// libmpv-android-<key>-<abi>.tar.gz per ABI) to test changes before a lock
+// bump. Checksums are skipped for local archives; the lock stays
+// authoritative otherwise.
+val localMpvDir: String? = (project.findProperty("plezy.localMpvDir") as String?)
+  ?: System.getenv("PLEZY_LOCAL_MPV_DIR")
+
+fun localArchive(abi: String): File {
+  val dir = File(localMpvDir!!)
+  val exact = File(dir, mpvAssets.getValue(abi).getValue("asset"))
+  if (exact.isFile) return exact
+  val pattern = Regex("libmpv-android-.+-${Regex.escape(abi)}\\.tar\\.gz")
+  val matches = dir.listFiles()?.filter { it.isFile && pattern.matches(it.name) }.orEmpty()
+  return matches.singleOrNull() ?: throw GradleException(
+    "PLEZY_LOCAL_MPV_DIR=$localMpvDir must contain exactly one libmpv-android-*-$abi.tar.gz, found ${matches.size}"
+  )
+}
+
+val downloadLibmpv = tasks.register("downloadLibmpv") {
+  val manifest = File(mpvArchivesDir, ".manifest")
+  inputs.file(mpvLockFile)
+  inputs.property("localOverride", localMpvDir ?: "")
+  if (localMpvDir != null) mpvAbis.forEach { abi -> inputs.file(localArchive(abi)) }
+  outputs.files(mpvAbis.map { File(mpvArchivesDir, stagedArchiveName(it)) } + manifest)
+  doLast {
+    mpvDir.mkdirs()
+    val staging = File(mpvDir, "archives.staging-${UUID.randomUUID()}")
+    try {
+      staging.mkdirs()
+      val manifestText = StringBuilder()
+      mpvAbis.forEach { abi ->
+        val staged = File(staging, stagedArchiveName(abi))
+        if (localMpvDir != null) {
+          val source = localArchive(abi)
+          source.copyTo(staged, overwrite = true)
+          manifestText.append("$abi=local:${source.absolutePath}\n")
+        } else {
+          val asset = mpvAssets.getValue(abi).getValue("asset")
+          val checksum = mpvAssets.getValue(abi).getValue("checksum")
+          try {
+            providers.exec {
+              commandLine("curl", "-sfL", "$mpvAssetBase/$asset", "-o", staged.absolutePath)
+            }.result.get().assertNormalExitValue()
+          } catch (error: Exception) {
+            throw GradleException("Failed to download $asset (mpv-build $mpvKey)", error)
+          }
+          verifySha256(staged, checksum, "$asset (mpv-build $mpvKey)")
+          manifestText.append("$abi=$asset sha256=$checksum\n")
+        }
+      }
+      File(staging, ".manifest").writeText(manifestText.toString())
+      promoteDirectory(staging, mpvArchivesDir)
+    } finally {
+      staging.deleteRecursively()
+    }
+  }
+}
+
+// Each tarball is a native tree: lib/*.so (libmpv, seven FFmpeg libraries,
+// libc++_shared) + include/mpv/*.h. The .so files land in the per-ABI jniLibs
+// layout under native/jni, the headers under native/include for the CMake
+// glue build, and libc++ in a separate tree that the app packages at PROJECT
+// scope so the tarball's 16 KB-capable runtime deterministically wins the
+// merge (see app/build.gradle.kts packaging { jniLibs } + sourceSets).
+val extractLibmpvNative = tasks.register("extractLibmpvNative") {
+  dependsOn(downloadLibmpv)
+  inputs.files(mpvAbis.map { File(mpvArchivesDir, stagedArchiveName(it)) })
+  outputs.dir(mpvNativeDir)
+  outputs.dir(mpvLibcxxDir)
+  doLast {
+    val nativeStaging = File(mpvDir, "native.staging-${UUID.randomUUID()}")
+    val libcxxStaging = File(mpvDir, "libcxx.staging-${UUID.randomUUID()}")
+    val unpackRoot = File(mpvDir, "unpack-${UUID.randomUUID()}")
+    try {
+      mpvAbis.forEach { abi ->
+        val unpack = File(unpackRoot, abi).apply { mkdirs() }
+        providers.exec {
+          commandLine(
+            "tar",
+            "-xzf",
+            File(mpvArchivesDir, stagedArchiveName(abi)).absolutePath,
+            "-C",
+            unpack.absolutePath
+          )
+        }.result.get().assertNormalExitValue()
+        val jniDir = File(nativeStaging, "jni/$abi")
+        File(unpack, "lib").listFiles()?.filter { it.isFile && it.name.endsWith(".so") }?.forEach { so ->
+          val target = if (so.name == "libc++_shared.so") {
+            File(libcxxStaging, "jni/$abi/${so.name}")
+          } else {
+            File(jniDir, so.name)
+          }
+          target.parentFile.mkdirs()
+          Files.move(so.toPath(), target.toPath())
+        }
+        // Headers are identical across ABIs; keep the first archive's copy.
+        val include = File(unpack, "include")
+        val includeTarget = File(nativeStaging, "include")
+        if (!includeTarget.exists() && include.isDirectory) {
+          include.copyRecursively(includeTarget)
+        }
+      }
+      val missing = buildList {
+        mpvAbis.forEach { abi ->
+          if (!File(nativeStaging, "jni/$abi/libmpv.so").isFile) add("native/jni/$abi/libmpv.so")
+          if (!File(nativeStaging, "jni/$abi/libavcodec.so").isFile) add("native/jni/$abi/libavcodec.so")
+          if (!File(libcxxStaging, "jni/$abi/libc++_shared.so").isFile) add("libcxx/jni/$abi/libc++_shared.so")
+        }
+        if (!File(nativeStaging, "include/mpv/client.h").isFile) add("native/include/mpv/client.h")
+      }
+      if (missing.isNotEmpty()) {
+        throw GradleException(
+          "mpv-build $mpvKey android archives are missing expected entries: ${missing.joinToString()}"
+        )
+      }
+      promoteDirectory(nativeStaging, mpvNativeDir)
+      promoteDirectory(libcxxStaging, mpvLibcxxDir)
+    } finally {
+      nativeStaging.deleteRecursively()
+      libcxxStaging.deleteRecursively()
+      unpackRoot.deleteRecursively()
+    }
+  }
+}
+
+android {
+  namespace = "com.edde746.plezy.libmpv"
+  compileSdk = 36
+  // Matches the app's latest stable NDK so every project-owned native library
+  // is built with the same 16 KB page-size-capable libc++ toolchain. That copy
+  // is NOT what ships: the app packages the mpv-build tarball's newer copy with
+  // top merge priority (see app/build.gradle.kts packaging { jniLibs } + sourceSets).
+  ndkVersion = "29.0.14206865"
+
+  defaultConfig {
+    // Fire OS 6.x (API 25), same floor as the app. The fork declared 26, but
+    // nothing in this API or glue uses anything above 25.
+    minSdk = 25
+    consumerProguardFiles("consumer-rules.pro")
+    externalNativeBuild {
+      cmake {
+        arguments += listOf(
+          "-DANDROID_STL=c++_shared",
+          "-DMPV_PREBUILT_ROOT=${mpvNativeDir.absolutePath}"
+        )
+        cFlags += "-Werror"
+        cppFlags += "-std=c++11"
+      }
+    }
+  }
+
+  compileOptions {
+    sourceCompatibility = JavaVersion.VERSION_17
+    targetCompatibility = JavaVersion.VERSION_17
+  }
+
+  externalNativeBuild {
+    cmake {
+      path = file("src/main/cpp/CMakeLists.txt")
+      version = "4.1.2"
+    }
+  }
+
+  sourceSets {
+    getByName("main") {
+      // Prebuilt libmpv + FFmpeg .so files extracted from the mpv-build tarballs;
+      // the glue libplayer.so comes from the CMake build above.
+      jniLibs.srcDir(File(mpvNativeDir, "jni"))
+    }
+  }
+}
+
+kotlin {
+  compilerOptions {
+    jvmTarget.set(JvmTarget.JVM_17)
+  }
+}
+
+// The imported libmpv.so/libavcodec.so must exist before CMake links the glue.
+tasks.matching { it.name.contains("CMake") || it.name.contains("externalNative") }.configureEach {
+  dependsOn(extractLibmpvNative)
+}
+// Gradle snapshots jniLibs source dirs before task execution; this keeps the
+// extracted prebuilt directory present during input discovery.
+tasks.matching { it.name.startsWith("merge") && it.name.endsWith("JniLibFolders") }.configureEach {
+  dependsOn(extractLibmpvNative)
+}
+tasks.matching { it.name.startsWith("pre") && it.name.endsWith("Build") }.configureEach {
+  dependsOn(extractLibmpvNative)
+}
+
+dependencies {
+  // Same version the app pins; MpvPlayer's public flows compile against it.
+  implementation("org.jetbrains.kotlinx:kotlinx-coroutines-android:1.11.0")
+}
@@ -0,0 +1,14 @@
+# JNI exports bind by name (Java_com_edde746_plezy_libmpv_MpvPlayer_native*); keep the names stable.
+-keepclasseswithmembernames class com.edde746.plezy.libmpv.* {
+    native <methods>;
+}
+
+# jni_utils.cpp caches MpvPlayer with FindClass and resolves these static callbacks
+# with GetStaticMethodID on the native event thread. R8 sees no reference to the
+# class name or the member names, so both must stay alive and un-renamed.
+-keep class com.edde746.plezy.libmpv.MpvPlayer {
+    public static void onPropertyChanged(...);
+    public static void onEvent(int);
+    public static void onEndFile(int);
+    public static void onLogMessage(java.lang.String, int, java.lang.String);
+}
@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="utf-8"?>
+<manifest xmlns:android="http://schemas.android.com/apk/res/android">
+
+</manifest>
@@ -0,0 +1,45 @@
+cmake_minimum_required(VERSION 3.22.1)
+
+project("libmpv")
+
+# The JNI glue this module compiles; MpvPlayer loads it with
+# System.loadLibrary("player") after libmpv.so itself.
+add_library(
+        player
+        SHARED
+        main.cpp render.cpp log.cpp jni_utils.cpp property.cpp event.cpp
+)
+
+# Prebuilt libraries extracted from the pinned mpv-build per-ABI tarballs by the
+# extractLibmpvNative Gradle task; MPV_PREBUILT_ROOT points at its output.
+add_library(
+        mpv
+        SHARED
+        IMPORTED
+)
+
+set_target_properties(
+        mpv
+        PROPERTIES IMPORTED_LOCATION
+        ${MPV_PREBUILT_ROOT}/jni/${ANDROID_ABI}/libmpv.so
+)
+
+# av_jni_set_java_vm / av_jni_set_android_app_ctx (main.cpp) live in FFmpeg's
+# libavcodec, which the same tarballs package.
+add_library(
+        avcodec
+        SHARED
+        IMPORTED
+)
+
+set_target_properties(
+        avcodec
+        PROPERTIES IMPORTED_LOCATION
+        ${MPV_PREBUILT_ROOT}/jni/${ANDROID_ABI}/libavcodec.so
+)
+
+# mpv public headers ride in the extracted tarballs next to libmpv.so; the
+# vendored tree only carries FFmpeg's libavcodec/jni.h (see include/README.md).
+include_directories( ${MPV_PREBUILT_ROOT}/include ${CMAKE_CURRENT_SOURCE_DIR}/include )
+
+target_link_libraries( player mpv avcodec log )
@@ -0,0 +1,99 @@
+#include <jni.h>
+#include <mpv/client.h>
+
+#include "globals.h"
+#include "jni_utils.h"
+#include "log.h"
+
+static void sendPropertyUpdateToJava(JNIEnv* env, mpv_event_property* prop) {
+  jstring jprop = new_java_string(env, prop->name);
+  jstring jvalue = NULL;
+  switch (prop->format) {
+    case MPV_FORMAT_NONE:
+      env->CallStaticVoidMethod(mpv_MpvPlayer, mpv_MpvPlayer_onPropertyChanged_S, jprop);
+      break;
+    case MPV_FORMAT_FLAG:
+      env->CallStaticVoidMethod(mpv_MpvPlayer, mpv_MpvPlayer_onPropertyChanged_Sb, jprop, *(int*)prop->data);
+      break;
+    case MPV_FORMAT_INT64:
+      env->CallStaticVoidMethod(mpv_MpvPlayer, mpv_MpvPlayer_onPropertyChanged_Sl, jprop, *(int64_t*)prop->data);
+      break;
+    case MPV_FORMAT_DOUBLE:
+      env->CallStaticVoidMethod(mpv_MpvPlayer, mpv_MpvPlayer_onPropertyChanged_Sd, jprop, *(double*)prop->data);
+      break;
+    case MPV_FORMAT_STRING:
+      jvalue = new_java_string(env, *(const char**)prop->data);
+      env->CallStaticVoidMethod(mpv_MpvPlayer, mpv_MpvPlayer_onPropertyChanged_SS, jprop, jvalue);
+      break;
+    default:
+      break;
+  }
+  if (jprop) env->DeleteLocalRef(jprop);
+  if (jvalue) env->DeleteLocalRef(jvalue);
+}
+
+static void sendEventToJava(JNIEnv* env, int event) {
+  env->CallStaticVoidMethod(mpv_MpvPlayer, mpv_MpvPlayer_onEvent, event);
+}
+
+static void sendEndFileToJava(JNIEnv* env, mpv_event* event) {
+  mpv_event_end_file* end_file = (mpv_event_end_file*)event->data;
+  int reason = end_file ? end_file->reason : -1;
+  env->CallStaticVoidMethod(mpv_MpvPlayer, mpv_MpvPlayer_onEndFile, (jint)reason);
+}
+
+static void sendLogMessageToJava(JNIEnv* env, mpv_event_log_message* msg) {
+  jstring jprefix = new_java_string(env, msg->prefix);
+  jstring jtext = new_java_string(env, msg->text);
+
+  env->CallStaticVoidMethod(mpv_MpvPlayer, mpv_MpvPlayer_onLogMessage, jprefix, (jint)msg->log_level, jtext);
+
+  if (jprefix) env->DeleteLocalRef(jprefix);
+  if (jtext) env->DeleteLocalRef(jtext);
+}
+
+void* event_thread(void* arg) {
+  JNIEnv* env = NULL;
+  acquire_jni_env(g_vm, &env);
+  if (!env) die("failed to acquire java env");
+
+  while (true) {
+    mpv_event* mp_event;
+    mpv_event_property* mp_property;
+    mpv_event_log_message* msg;
+
+    mp_event = mpv_wait_event(g_mpv, -1.0);
+
+    if (g_event_thread_request_exit) break;
+
+    if (mp_event->event_id == MPV_EVENT_NONE) continue;
+
+    switch (mp_event->event_id) {
+      case MPV_EVENT_LOG_MESSAGE:
+        msg = (mpv_event_log_message*)mp_event->data;
+        ALOGV("[%s:%s] %s", msg->prefix, msg->level, msg->text);
+        sendLogMessageToJava(env, msg);
+        break;
+      case MPV_EVENT_PROPERTY_CHANGE:
+        mp_property = (mpv_event_property*)mp_event->data;
+        sendPropertyUpdateToJava(env, mp_property);
+        break;
+      case MPV_EVENT_END_FILE:
+        sendEndFileToJava(env, mp_event);
+        break;
+      case MPV_EVENT_START_FILE:
+      case MPV_EVENT_FILE_LOADED:
+      case MPV_EVENT_PLAYBACK_RESTART:
+        ALOGV("event: %s\n", mpv_event_name(mp_event->event_id));
+        sendEventToJava(env, mp_event->event_id);
+        break;
+      default:
+        // Nothing on the Kotlin side consumes the remaining ids (MpvEvent.fromId).
+        break;
+    }
+  }
+
+  g_vm->DetachCurrentThread();
+
+  return NULL;
+}
@@ -0,0 +1,3 @@
+#pragma once
+
+void* event_thread(void* arg);
@@ -0,0 +1,10 @@
+#pragma once
+
+#include <jni.h>
+#include <mpv/client.h>
+
+#include <atomic>
+
+extern JavaVM* g_vm;
+extern mpv_handle* g_mpv;
+extern std::atomic<bool> g_event_thread_request_exit;
@@ -0,0 +1,15 @@
+# Vendored native headers
+
+Build-time headers for the JNI glue in this module; nothing here ships in the APK.
+Each file carries its own upstream license text — none is modified.
+
+- `libavcodec/jni.h` — FFmpeg n8.0.1 (https://github.com/FFmpeg/FFmpeg, tag `n8.0.1`,
+  commit `894da5ca7d742e4429ffb2af534fcda0103ef593`), copied unmodified. Declares
+  `av_jni_set_java_vm` / `av_jni_set_android_app_ctx`, which `main.cpp` calls into the
+  `libavcodec.so` packaged by the pinned mpv-build tarballs (FFmpeg 8.0.1 — the
+  version `app/build.gradle.kts` also pins for the Media3 adapter headers).
+
+The mpv public headers (`mpv/client.h`, `mpv/render.h`, `mpv/render_gl.h`,
+`mpv/stream_cb.h`) are no longer vendored: each mpv-build per-ABI tarball carries
+`include/mpv/*.h` matching its `libmpv.so`, and `extractLibmpvNative` places them
+under `native/include`, which CMake reads via `MPV_PREBUILT_ROOT`.
@@ -0,0 +1,67 @@
+/*
+ * JNI public API functions
+ *
+ * Copyright (c) 2015-2016 Matthieu Bouron <matthieu.bouron stupeflix.com>
+ *
+ * This file is part of FFmpeg.
+ *
+ * FFmpeg is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * FFmpeg is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with FFmpeg; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef AVCODEC_JNI_H
+#define AVCODEC_JNI_H
+
+/*
+ * Manually set a Java virtual machine which will be used to retrieve the JNI
+ * environment. Once a Java VM is set it cannot be changed afterwards, meaning
+ * you can call multiple times av_jni_set_java_vm with the same Java VM pointer
+ * however it will error out if you try to set a different Java VM.
+ *
+ * @param vm Java virtual machine
+ * @param log_ctx context used for logging, can be NULL
+ * @return 0 on success, < 0 otherwise
+ */
+int av_jni_set_java_vm(void *vm, void *log_ctx);
+
+/*
+ * Get the Java virtual machine which has been set with av_jni_set_java_vm.
+ *
+ * @param vm Java virtual machine
+ * @return a pointer to the Java virtual machine
+ */
+void *av_jni_get_java_vm(void *log_ctx);
+
+/*
+ * Set the Android application context which will be used to retrieve the Android
+ * content resolver to handle content uris.
+ *
+ * This function is only available on Android.
+ *
+ * @param app_ctx global JNI reference to the Android application context
+ * @return 0 on success, < 0 otherwise
+ */
+int av_jni_set_android_app_ctx(void *app_ctx, void *log_ctx);
+
+/*
+ * Get the Android application context that has been set with
+ * av_jni_set_android_app_ctx.
+ *
+ * This function is only available on Android.
+ *
+ * @return a pointer the the Android application context
+ */
+void *av_jni_get_android_app_ctx(void);
+
+#endif /* AVCODEC_JNI_H */
@@ -0,0 +1,760 @@
+/* Copyright (C) 2018 the mpv developers
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef MPV_CLIENT_API_RENDER_H_
+#define MPV_CLIENT_API_RENDER_H_
+
+#include "client.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Overview
+ * --------
+ *
+ * This API can be used to make mpv render using supported graphic APIs (such
+ * as OpenGL). It can be used to handle video display.
+ *
+ * The renderer needs to be created with mpv_render_context_create() before
+ * you start playback (or otherwise cause a VO to be created). Then (with most
+ * backends) mpv_render_context_render() can be used to explicitly render the
+ * current video frame. Use mpv_render_context_set_update_callback() to get
+ * notified when there is a new frame to draw.
+ *
+ * Preferably rendering should be done in a separate thread. If you call
+ * normal libmpv API functions on the renderer thread, deadlocks can result
+ * (these are made non-fatal with timeouts, but user experience will obviously
+ * suffer). See "Threading" section below.
+ *
+ * You can output and embed video without this API by setting the mpv "wid"
+ * option to a native window handle (see "Embedding the video window" section
+ * in the client.h header). In general, using the render API is recommended,
+ * because window embedding can cause various issues, especially with GUI
+ * toolkits and certain platforms.
+ *
+ * Supported backends
+ * ------------------
+ *
+ * OpenGL: via MPV_RENDER_API_TYPE_OPENGL, see render_gl.h header.
+ * Software: via MPV_RENDER_API_TYPE_SW, see section "Software renderer"
+ *
+ * Threading
+ * ---------
+ *
+ * You are recommended to do rendering on a separate thread than normal libmpv
+ * use.
+ *
+ * The mpv_render_* functions can be called from any thread, under the
+ * following conditions:
+ *  - only one of the mpv_render_* functions can be called at the same time
+ *    (unless they belong to different mpv cores created by mpv_create())
+ *  - never can be called from within the callbacks set with
+ *    mpv_set_wakeup_callback() or mpv_render_context_set_update_callback()
+ *  - if the OpenGL backend is used, for all functions the OpenGL context
+ *    must be "current" in the calling thread, and it must be the same OpenGL
+ *    context as the mpv_render_context was created with. Otherwise, undefined
+ *    behavior will occur.
+ *  - the thread does not call libmpv API functions other than the mpv_render_*
+ *    functions, except APIs which are declared as safe (see below). Likewise,
+ *    there must be no lock or wait dependency from the render thread to a
+ *    thread using other libmpv functions. Basically, the situation that your
+ *    render thread waits for a "not safe" libmpv API function to return must
+ *    not happen. If you ignore this requirement, deadlocks can happen, which
+ *    are made non-fatal with timeouts; then playback quality will be degraded,
+ *    and the message
+ *          mpv_render_context_render() not being called or stuck.
+ *    is logged. If you set MPV_RENDER_PARAM_ADVANCED_CONTROL, you promise that
+ *    this won't happen, and must absolutely guarantee it, or a real deadlock
+ *    will freeze the mpv core thread forever.
+ *
+ * libmpv functions which are safe to call from a render thread are:
+ *  - functions marked with "Safe to be called from mpv render API threads."
+ *  - client.h functions which don't have an explicit or implicit mpv_handle
+ *    parameter
+ *  - mpv_render_* functions; but only for the same mpv_render_context pointer.
+ *    If the pointer is different, mpv_render_context_free() is not safe. (The
+ *    reason is that if MPV_RENDER_PARAM_ADVANCED_CONTROL is set, it may have
+ *    to process still queued requests from the core, which it can do only for
+ *    the current context, while requests for other contexts would deadlock.
+ *    Also, it may have to wait and block for the core to terminate the video
+ *    chain to make sure no resources are used after context destruction.)
+ *  - if the mpv_handle parameter refers to a different mpv core than the one
+ *    you're rendering for (very obscure, but allowed)
+ *
+ * Note about old libmpv version:
+ *
+ *      Before API version 1.105 (basically in mpv 0.29.x), simply enabling
+ *      MPV_RENDER_PARAM_ADVANCED_CONTROL could cause deadlock issues. This can
+ *      be worked around by setting the "vd-lavc-dr" option to "no".
+ *      In addition, you were required to call all mpv_render*() API functions
+ *      from the same thread on which mpv_render_context_create() was originally
+ *      run (for the same the mpv_render_context). Not honoring it led to UB
+ *      (deadlocks, use of invalid mp_thread handles), even if you moved your GL
+ *      context to a different thread correctly.
+ *      These problems were addressed in API version 1.105 (mpv 0.30.0).
+ *
+ * Context and handle lifecycle
+ * ----------------------------
+ *
+ * Video initialization will fail if the render context was not initialized yet
+ * (with mpv_render_context_create()), or it will revert to a VO that creates
+ * its own window.
+ *
+ * Currently, there can be only 1 mpv_render_context at a time per mpv core.
+ *
+ * Calling mpv_render_context_free() while a VO is using the render context is
+ * active will disable video.
+ *
+ * You must free the context with mpv_render_context_free() before the mpv core
+ * is destroyed. If this doesn't happen, undefined behavior will result.
+ *
+ * Software renderer
+ * -----------------
+ *
+ * MPV_RENDER_API_TYPE_SW provides an extremely simple (but slow) renderer to
+ * memory surfaces. You probably don't want to use this. Use other render API
+ * types, or other methods of video embedding.
+ *
+ * Use mpv_render_context_create() with MPV_RENDER_PARAM_API_TYPE set to
+ * MPV_RENDER_API_TYPE_SW.
+ *
+ * Call mpv_render_context_render() with various MPV_RENDER_PARAM_SW_* fields
+ * to render the video frame to an in-memory surface. The following fields are
+ * required: MPV_RENDER_PARAM_SW_SIZE, MPV_RENDER_PARAM_SW_FORMAT,
+ * MPV_RENDER_PARAM_SW_STRIDE, MPV_RENDER_PARAM_SW_POINTER.
+ *
+ * This method of rendering is very slow, because everything, including color
+ * conversion, scaling, and OSD rendering, is done on the CPU, single-threaded.
+ * In particular, large video or display sizes, as well as presence of OSD or
+ * subtitles can make it too slow for realtime. As with other software rendering
+ * VOs, setting "sw-fast" may help. Enabling or disabling zimg may help,
+ * depending on the platform.
+ *
+ * In addition, certain multimedia job creation measures like HDR may not work
+ * properly, and will have to be manually handled by for example inserting
+ * filters.
+ *
+ * This API is not really suitable to extract individual frames from video etc.
+ * (basically non-playback uses) - there are better libraries for this. It can
+ * be used this way, but it may be clunky and tricky.
+ *
+ * Further notes:
+ * - MPV_RENDER_PARAM_FLIP_Y is currently ignored (unsupported)
+ * - MPV_RENDER_PARAM_DEPTH is ignored (meaningless)
+ */
+
+/**
+ * Opaque context, returned by mpv_render_context_create().
+ */
+typedef struct mpv_render_context mpv_render_context;
+
+/**
+ * Parameters for mpv_render_param (which is used in a few places such as
+ * mpv_render_context_create().
+ *
+ * Also see mpv_render_param for conventions and how to use it.
+ */
+typedef enum mpv_render_param_type {
+    /**
+     * Not a valid value, but also used to terminate a params array. Its value
+     * is always guaranteed to be 0 (even if the ABI changes in the future).
+     */
+    MPV_RENDER_PARAM_INVALID = 0,
+    /**
+     * The render API to use. Valid for mpv_render_context_create().
+     *
+     * Type: char*
+     *
+     * Defined APIs:
+     *
+     *   MPV_RENDER_API_TYPE_OPENGL:
+     *      OpenGL desktop 2.1 or later (preferably core profile compatible to
+     *      OpenGL 3.2), or OpenGLES 2.0 or later.
+     *      Providing MPV_RENDER_PARAM_OPENGL_INIT_PARAMS is required.
+     *      It is expected that an OpenGL context is valid and "current" when
+     *      calling mpv_render_* functions (unless specified otherwise). It
+     *      must be the same context for the same mpv_render_context.
+     */
+    MPV_RENDER_PARAM_API_TYPE = 1,
+    /**
+     * Required parameters for initializing the OpenGL renderer. Valid for
+     * mpv_render_context_create().
+     * Type: mpv_opengl_init_params*
+     */
+    MPV_RENDER_PARAM_OPENGL_INIT_PARAMS = 2,
+    /**
+     * Describes a GL render target. Valid for mpv_render_context_render().
+     * Type: mpv_opengl_fbo*
+     */
+    MPV_RENDER_PARAM_OPENGL_FBO = 3,
+    /**
+     * Control flipped rendering. Valid for mpv_render_context_render().
+     * Type: int*
+     * If the value is set to 0, render normally. Otherwise, render it flipped,
+     * which is needed e.g. when rendering to an OpenGL default framebuffer
+     * (which has a flipped coordinate system).
+     */
+    MPV_RENDER_PARAM_FLIP_Y = 4,
+    /**
+     * Control surface depth. Valid for mpv_render_context_render().
+     * Type: int*
+     * This implies the depth of the surface passed to the render function in
+     * bits per channel. If omitted or set to 0, the renderer will assume 8.
+     * Typically used to control dithering.
+     */
+    MPV_RENDER_PARAM_DEPTH = 5,
+    /**
+     * ICC profile blob. Valid for mpv_render_context_set_parameter().
+     * Type: mpv_byte_array*
+     * Set an ICC profile for use with the "icc-profile-auto" option. (If the
+     * option is not enabled, the ICC data will not be used.)
+     */
+    MPV_RENDER_PARAM_ICC_PROFILE = 6,
+    /**
+     * Deprecated
+     * Ambient light in lux. Valid for mpv_render_context_set_parameter().
+     * Type: int*
+     * This can be used for automatic gamma correction.
+     */
+    MPV_RENDER_PARAM_AMBIENT_LIGHT = 7,
+    /**
+     * X11 Display, sometimes used for hwdec. Valid for
+     * mpv_render_context_create(). The Display must stay valid for the lifetime
+     * of the mpv_render_context.
+     * Type: Display*
+     */
+    MPV_RENDER_PARAM_X11_DISPLAY = 8,
+    /**
+     * Wayland display, sometimes used for hwdec. Valid for
+     * mpv_render_context_create(). The wl_display must stay valid for the
+     * lifetime of the mpv_render_context.
+     * Type: struct wl_display*
+     */
+    MPV_RENDER_PARAM_WL_DISPLAY = 9,
+    /**
+     * Better control about rendering and enabling some advanced features. Valid
+     * for mpv_render_context_create().
+     *
+     * This conflates multiple requirements the API user promises to abide if
+     * this option is enabled:
+     *
+     *  - The API user's render thread, which is calling the mpv_render_*()
+     *    functions, never waits for the core. Otherwise deadlocks can happen.
+     *    See "Threading" section.
+     *  - The callback set with mpv_render_context_set_update_callback() can now
+     *    be called even if there is no new frame. The API user should call the
+     *    mpv_render_context_update() function, and interpret the return value
+     *    for whether a new frame should be rendered.
+     *  - Correct functionality is impossible if the update callback is not set,
+     *    or not set soon enough after mpv_render_context_create() (the core can
+     *    block while waiting for you to call mpv_render_context_update(), and
+     *    if the update callback is not correctly set, it will deadlock, or
+     *    block for too long).
+     *
+     * In general, setting this option will enable the following features (and
+     * possibly more):
+     *
+     *  - "Direct rendering", which means the player decodes directly to a
+     *    texture, which saves a copy per video frame ("vd-lavc-dr" option
+     *    needs to be enabled, and the rendering backend as well as the
+     *    underlying GPU API/driver needs to have support for it).
+     *  - Rendering screenshots with the GPU API if supported by the backend
+     *    (instead of using a suboptimal software fallback via libswscale).
+     *
+     * Warning: do not just add this without reading the "Threading" section
+     *          above, and then wondering that deadlocks happen. The
+     *          requirements are tricky. But also note that even if advanced
+     *          control is disabled, not adhering to the rules will lead to
+     *          playback problems. Enabling advanced controls simply makes
+     *          violating these rules fatal.
+     *
+     * Type: int*: 0 for disable (default), 1 for enable
+     */
+    MPV_RENDER_PARAM_ADVANCED_CONTROL = 10,
+    /**
+     * Return information about the next frame to render. Valid for
+     * mpv_render_context_get_info().
+     *
+     * Type: mpv_render_frame_info*
+     *
+     * It strictly returns information about the _next_ frame. The implication
+     * is that e.g. mpv_render_context_update()'s return value will have
+     * MPV_RENDER_UPDATE_FRAME set, and the user is supposed to call
+     * mpv_render_context_render(). If there is no next frame, then the
+     * return value will have is_valid set to 0.
+     */
+    MPV_RENDER_PARAM_NEXT_FRAME_INFO = 11,
+    /**
+     * Enable or disable video timing. Valid for mpv_render_context_render().
+     *
+     * Type: int*: 0 for disable, 1 for enable (default)
+     *
+     * When video is timed to audio, the player attempts to render video a bit
+     * ahead, and then do a blocking wait until the target display time is
+     * reached. This blocks mpv_render_context_render() for up to the amount
+     * specified with the "video-timing-offset" global option. You can set
+     * this parameter to 0 to disable this kind of waiting. If you do, it's
+     * recommended to use the target time value in mpv_render_frame_info to
+     * wait yourself, or to set the "video-timing-offset" to 0 instead.
+     *
+     * Disabling this without doing anything in addition will result in A/V sync
+     * being slightly off.
+     */
+    MPV_RENDER_PARAM_BLOCK_FOR_TARGET_TIME = 12,
+    /**
+     * Use to skip rendering in mpv_render_context_render().
+     *
+     * Type: int*: 0 for rendering (default), 1 for skipping
+     *
+     * If this is set, you don't need to pass a target surface to the render
+     * function (and if you do, it's completely ignored). This can still call
+     * into the lower level APIs (i.e. if you use OpenGL, the OpenGL context
+     * must be set).
+     *
+     * Be aware that the render API will consider this frame as having been
+     * rendered. All other normal rules also apply, for example about whether
+     * you have to call mpv_render_context_report_swap(). It also does timing
+     * in the same way.
+     */
+    MPV_RENDER_PARAM_SKIP_RENDERING = 13,
+    /**
+     * Deprecated. Not supported. Use MPV_RENDER_PARAM_DRM_DISPLAY_V2 instead.
+     * Type : struct mpv_opengl_drm_params*
+     */
+    MPV_RENDER_PARAM_DRM_DISPLAY = 14,
+    /**
+     * DRM draw surface size, contains draw surface dimensions.
+     * Valid for mpv_render_context_create().
+     * Type : struct mpv_opengl_drm_draw_surface_size*
+     */
+    MPV_RENDER_PARAM_DRM_DRAW_SURFACE_SIZE = 15,
+    /**
+     * DRM display, contains drm display handles.
+     * Valid for mpv_render_context_create().
+     * Type : struct mpv_opengl_drm_params_v2*
+    */
+    MPV_RENDER_PARAM_DRM_DISPLAY_V2 = 16,
+    /**
+     * MPV_RENDER_API_TYPE_SW only: rendering target surface size, mandatory.
+     * Valid for MPV_RENDER_API_TYPE_SW & mpv_render_context_render().
+     * Type: int[2] (e.g.: int s[2] = {w, h}; param.data = &s[0];)
+     *
+     * The video frame is transformed as with other VOs. Typically, this means
+     * the video gets scaled and black bars are added if the video size or
+     * aspect ratio mismatches with the target size.
+     */
+    MPV_RENDER_PARAM_SW_SIZE = 17,
+    /**
+     * MPV_RENDER_API_TYPE_SW only: rendering target surface pixel format,
+     * mandatory.
+     * Valid for MPV_RENDER_API_TYPE_SW & mpv_render_context_render().
+     * Type: char* (e.g.: char *f = "rgb0"; param.data = f;)
+     *
+     * Valid values are:
+     *  "rgb0", "bgr0", "0bgr", "0rgb"
+     *      4 bytes per pixel RGB, 1 byte (8 bit) per component, component bytes
+     *      with increasing address from left to right (e.g. "rgb0" has r at
+     *      address 0), the "0" component contains uninitialized garbage (often
+     *      the value 0, but not necessarily; the bad naming is inherited from
+     *      FFmpeg)
+     *      Pixel alignment size: 4 bytes
+     *  "rgb24"
+     *      3 bytes per pixel RGB. This is strongly discouraged because it is
+     *      very slow.
+     *      Pixel alignment size: 1 bytes
+     *  other
+     *      The API may accept other pixel formats, using mpv internal format
+     *      names, as long as it's internally marked as RGB, has exactly 1
+     *      plane, and is supported as conversion output. It is not a good idea
+     *      to rely on any of these. Their semantics and handling could change.
+     */
+    MPV_RENDER_PARAM_SW_FORMAT = 18,
+    /**
+     * MPV_RENDER_API_TYPE_SW only: rendering target surface bytes per line,
+     * mandatory.
+     * Valid for MPV_RENDER_API_TYPE_SW & mpv_render_context_render().
+     * Type: size_t*
+     *
+     * This is the number of bytes between a pixel (x, y) and (x, y + 1) on the
+     * target surface. It must be a multiple of the pixel size, and have space
+     * for the surface width as specified by MPV_RENDER_PARAM_SW_SIZE.
+     *
+     * Both stride and pointer value should be a multiple of 64 to facilitate
+     * fast SIMD operation. Lower alignment might trigger slower code paths,
+     * and in the worst case, will copy the entire target frame. If mpv is built
+     * with zimg (and zimg is not disabled), the performance impact might be
+     * less.
+     * In either cases, the pointer and stride must be aligned at least to the
+     * pixel alignment size. Otherwise, crashes and undefined behavior is
+     * possible on platforms which do not support unaligned accesses (either
+     * through normal memory access or aligned SIMD memory access instructions).
+     */
+    MPV_RENDER_PARAM_SW_STRIDE = 19,
+    /*
+     * MPV_RENDER_API_TYPE_SW only: rendering target surface pixel data pointer,
+     * mandatory.
+     * Valid for MPV_RENDER_API_TYPE_SW & mpv_render_context_render().
+     * Type: void*
+     *
+     * This points to the first pixel at the left/top corner (0, 0). In
+     * particular, each line y starts at (pointer + stride * y). Upon rendering,
+     * all data between pointer and (pointer + stride * h) is overwritten.
+     * Whether the padding between (w, y) and (0, y + 1) is overwritten is left
+     * unspecified (it should not be, but unfortunately some scaler backends
+     * will do it anyway). It is assumed that even the padding after the last
+     * line (starting at bytepos(w, h) until (pointer + stride * h)) is
+     * writable.
+     *
+     * See MPV_RENDER_PARAM_SW_STRIDE for alignment requirements.
+     */
+    MPV_RENDER_PARAM_SW_POINTER = 20,
+} mpv_render_param_type;
+
+/**
+ * For backwards compatibility with the old naming of
+ * MPV_RENDER_PARAM_DRM_DRAW_SURFACE_SIZE
+ */
+#define MPV_RENDER_PARAM_DRM_OSD_SIZE MPV_RENDER_PARAM_DRM_DRAW_SURFACE_SIZE
+
+/**
+ * Used to pass arbitrary parameters to some mpv_render_* functions. The
+ * meaning of the data parameter is determined by the type, and each
+ * MPV_RENDER_PARAM_* documents what type the value must point to.
+ *
+ * Each value documents the required data type as the pointer you cast to
+ * void* and set on mpv_render_param.data. For example, if MPV_RENDER_PARAM_FOO
+ * documents the type as Something* , then the code should look like this:
+ *
+ *   Something foo = {...};
+ *   mpv_render_param param;
+ *   param.type = MPV_RENDER_PARAM_FOO;
+ *   param.data = & foo;
+ *
+ * Normally, the data field points to exactly 1 object. If the type is char*,
+ * it points to a 0-terminated string.
+ *
+ * In all cases (unless documented otherwise) the pointers need to remain
+ * valid during the call only. Unless otherwise documented, the API functions
+ * will not write to the params array or any data pointed to it.
+ *
+ * As a convention, parameter arrays are always terminated by type==0. There
+ * is no specific order of the parameters required. The order of the 2 fields in
+ * this struct is guaranteed (even after ABI changes).
+ */
+typedef struct mpv_render_param {
+    enum mpv_render_param_type type;
+    void *data;
+} mpv_render_param;
+
+
+/**
+ * Predefined values for MPV_RENDER_PARAM_API_TYPE.
+ */
+// See render_gl.h
+#define MPV_RENDER_API_TYPE_OPENGL "opengl"
+// See section "Software renderer"
+#define MPV_RENDER_API_TYPE_SW "sw"
+
+/**
+ * Flags used in mpv_render_frame_info.flags. Each value represents a bit in it.
+ */
+typedef enum mpv_render_frame_info_flag {
+    /**
+     * Set if there is actually a next frame. If unset, there is no next frame
+     * yet, and other flags and fields that require a frame to be queued will
+     * be unset.
+     *
+     * This is set for _any_ kind of frame, even for redraw requests.
+     *
+     * Note that when this is unset, it simply means no new frame was
+     * decoded/queued yet, not necessarily that the end of the video was
+     * reached. A new frame can be queued after some time.
+     *
+     * If the return value of mpv_render_context_render() had the
+     * MPV_RENDER_UPDATE_FRAME flag set, this flag will usually be set as well,
+     * unless the frame is rendered, or discarded by other asynchronous events.
+     */
+    MPV_RENDER_FRAME_INFO_PRESENT         = 1 << 0,
+    /**
+     * If set, the frame is not an actual new video frame, but a redraw request.
+     * For example if the video is paused, and an option that affects video
+     * rendering was changed (or any other reason), an update request can be
+     * issued and this flag will be set.
+     *
+     * Typically, redraw frames will not be subject to video timing.
+     *
+     * Implies MPV_RENDER_FRAME_INFO_PRESENT.
+     */
+    MPV_RENDER_FRAME_INFO_REDRAW          = 1 << 1,
+    /**
+     * If set, this is supposed to reproduce the previous frame perfectly. This
+     * is usually used for certain "video-sync" options ("display-..." modes).
+     * Typically the renderer will blit the video from a FBO. Unset otherwise.
+     *
+     * Implies MPV_RENDER_FRAME_INFO_PRESENT.
+     */
+    MPV_RENDER_FRAME_INFO_REPEAT          = 1 << 2,
+    /**
+     * If set, the player timing code expects that the user thread blocks on
+     * vsync (by either delaying the render call, or by making a call to
+     * mpv_render_context_report_swap() at vsync time).
+     *
+     * Implies MPV_RENDER_FRAME_INFO_PRESENT.
+     */
+    MPV_RENDER_FRAME_INFO_BLOCK_VSYNC     = 1 << 3,
+} mpv_render_frame_info_flag;
+
+/**
+ * Information about the next video frame that will be rendered. Can be
+ * retrieved with MPV_RENDER_PARAM_NEXT_FRAME_INFO.
+ */
+typedef struct mpv_render_frame_info {
+    /**
+     * A bitset of mpv_render_frame_info_flag values (i.e. multiple flags are
+     * combined with bitwise or).
+     */
+    uint64_t flags;
+    /**
+     * Absolute time at which the frame is supposed to be displayed. This is in
+     * the same unit and base as the time returned by mpv_get_time_us(). For
+     * frames that are redrawn, or if vsync locked video timing is used (see
+     * "video-sync" option), then this can be 0. The "video-timing-offset"
+     * option determines how much "headroom" the render thread gets (but a high
+     * enough frame rate can reduce it anyway). mpv_render_context_render() will
+     * normally block until the time is elapsed, unless you pass it
+     * MPV_RENDER_PARAM_BLOCK_FOR_TARGET_TIME = 0.
+     */
+    int64_t target_time;
+} mpv_render_frame_info;
+
+/**
+ * Initialize the renderer state. Depending on the backend used, this will
+ * access the underlying GPU API and initialize its own objects.
+ *
+ * You must free the context with mpv_render_context_free(). Not doing so before
+ * the mpv core is destroyed may result in memory leaks or crashes.
+ *
+ * Currently, only at most 1 context can exists per mpv core (it represents the
+ * main video output).
+ *
+ * You should pass the following parameters:
+ *  - MPV_RENDER_PARAM_API_TYPE to select the underlying backend/GPU API.
+ *  - Backend-specific init parameter, like MPV_RENDER_PARAM_OPENGL_INIT_PARAMS.
+ *  - Setting MPV_RENDER_PARAM_ADVANCED_CONTROL and following its rules is
+ *    strongly recommended.
+ *  - If you want to use hwdec, possibly hwdec interop resources.
+ *
+ * @param res set to the context (on success) or NULL (on failure). The value
+ *            is never read and always overwritten.
+ * @param mpv handle used to get the core (the mpv_render_context won't depend
+ *            on this specific handle, only the core referenced by it)
+ * @param params an array of parameters, terminated by type==0. It's left
+ *               unspecified what happens with unknown parameters. At least
+ *               MPV_RENDER_PARAM_API_TYPE is required, and most backends will
+ *               require another backend-specific parameter.
+ * @return error code, including but not limited to:
+ *      MPV_ERROR_UNSUPPORTED: the OpenGL version is not supported
+ *                             (or required extensions are missing)
+ *      MPV_ERROR_NOT_IMPLEMENTED: an unknown API type was provided, or
+ *                                 support for the requested API was not
+ *                                 built in the used libmpv binary.
+ *      MPV_ERROR_INVALID_PARAMETER: at least one of the provided parameters was
+ *                                   not valid.
+ */
+MPV_EXPORT int mpv_render_context_create(mpv_render_context **res, mpv_handle *mpv,
+                                         mpv_render_param *params);
+
+/**
+ * Attempt to change a single parameter. Not all backends and parameter types
+ * support all kinds of changes.
+ *
+ * @param ctx a valid render context
+ * @param param the parameter type and data that should be set
+ * @return error code. If a parameter could actually be changed, this returns
+ *         success, otherwise an error code depending on the parameter type
+ *         and situation.
+ */
+MPV_EXPORT int mpv_render_context_set_parameter(mpv_render_context *ctx,
+                                                mpv_render_param param);
+
+/**
+ * Retrieve information from the render context. This is NOT a counterpart to
+ * mpv_render_context_set_parameter(), because you generally can't read
+ * parameters set with it, and this function is not meant for this purpose.
+ * Instead, this is for communicating information from the renderer back to the
+ * user. See mpv_render_param_type; entries which support this function
+ * explicitly mention it, and for other entries you can assume it will fail.
+ *
+ * You pass param with param.type set and param.data pointing to a variable
+ * of the required data type. The function will then overwrite that variable
+ * with the returned value (at least on success).
+ *
+ * @param ctx a valid render context
+ * @param param the parameter type and data that should be retrieved
+ * @return error code. If a parameter could actually be retrieved, this returns
+ *         success, otherwise an error code depending on the parameter type
+ *         and situation. MPV_ERROR_NOT_IMPLEMENTED is used for unknown
+ *         param.type, or if retrieving it is not supported.
+ */
+MPV_EXPORT int mpv_render_context_get_info(mpv_render_context *ctx,
+                                           mpv_render_param param);
+
+typedef void (*mpv_render_update_fn)(void *cb_ctx);
+
+/**
+ * Set the callback that notifies you when a new video frame is available, or
+ * if the video display configuration somehow changed and requires a redraw.
+ * Similar to mpv_set_wakeup_callback(), you must not call any mpv API from
+ * the callback, and all the other listed restrictions apply (such as not
+ * exiting the callback by throwing exceptions).
+ *
+ * This can be called from any thread, except from an update callback. In case
+ * of the OpenGL backend, no OpenGL state or API is accessed.
+ *
+ * Calling this will raise an update callback immediately.
+ *
+ * @param callback callback(callback_ctx) is called if the frame should be
+ *                 redrawn
+ * @param callback_ctx opaque argument to the callback
+ */
+MPV_EXPORT void mpv_render_context_set_update_callback(mpv_render_context *ctx,
+                                                       mpv_render_update_fn callback,
+                                                       void *callback_ctx);
+
+/**
+ * The API user is supposed to call this when the update callback was invoked
+ * (like all mpv_render_* functions, this has to happen on the render thread,
+ * and _not_ from the update callback itself).
+ *
+ * This is optional if MPV_RENDER_PARAM_ADVANCED_CONTROL was not set (default).
+ * Otherwise, it's a hard requirement that this is called after each update
+ * callback. If multiple update callback happened, and the function could not
+ * be called sooner, it's OK to call it once after the last callback.
+ *
+ * If an update callback happens during or after this function, the function
+ * must be called again at the soonest possible time.
+ *
+ * If MPV_RENDER_PARAM_ADVANCED_CONTROL was set, this will do additional work
+ * such as allocating textures for the video decoder.
+ *
+ * @return a bitset of mpv_render_update_flag values (i.e. multiple flags are
+ *         combined with bitwise or). Typically, this will tell the API user
+ *         what should happen next. E.g. if the MPV_RENDER_UPDATE_FRAME flag is
+ *         set, mpv_render_context_render() should be called. If flags unknown
+ *         to the API user are set, or if the return value is 0, nothing needs
+ *         to be done.
+ */
+MPV_EXPORT uint64_t mpv_render_context_update(mpv_render_context *ctx);
+
+/**
+ * Flags returned by mpv_render_context_update(). Each value represents a bit
+ * in the function's return value.
+ */
+typedef enum mpv_render_update_flag {
+    /**
+     * A new video frame must be rendered. mpv_render_context_render() must be
+     * called.
+     */
+    MPV_RENDER_UPDATE_FRAME         = 1 << 0,
+} mpv_render_context_flag;
+
+/**
+ * Render video.
+ *
+ * Typically renders the video to a target surface provided via mpv_render_param
+ * (the details depend on the backend in use). Options like "panscan" are
+ * applied to determine which part of the video should be visible and how the
+ * video should be scaled. You can change these options at runtime by using the
+ * mpv property API.
+ *
+ * The renderer will reconfigure itself every time the target surface
+ * configuration (such as size) is changed.
+ *
+ * This function implicitly pulls a video frame from the internal queue and
+ * renders it. If no new frame is available, the previous frame is redrawn.
+ * The update callback set with mpv_render_context_set_update_callback()
+ * notifies you when a new frame was added. The details potentially depend on
+ * the backends and the provided parameters.
+ *
+ * Generally, libmpv will invoke your update callback some time before the video
+ * frame should be shown, and then lets this function block until the supposed
+ * display time. This will limit your rendering to video FPS. You can prevent
+ * this by setting the "video-timing-offset" global option to 0. (This applies
+ * only to "audio" video sync mode.)
+ *
+ * You should pass the following parameters:
+ *  - Backend-specific target object, such as MPV_RENDER_PARAM_OPENGL_FBO.
+ *  - Possibly transformations, such as MPV_RENDER_PARAM_FLIP_Y.
+ *
+ * @param ctx a valid render context
+ * @param params an array of parameters, terminated by type==0. Which parameters
+ *               are required depends on the backend. It's left unspecified what
+ *               happens with unknown parameters.
+ * @return error code
+ */
+MPV_EXPORT int mpv_render_context_render(mpv_render_context *ctx, mpv_render_param *params);
+
+/**
+ * Tell the renderer that a frame was flipped at the given time. This is
+ * optional, but can help the player to achieve better timing.
+ *
+ * Note that calling this at least once informs libmpv that you will use this
+ * function. If you use it inconsistently, expect bad video playback.
+ *
+ * If this is called while no video is initialized, it is ignored.
+ *
+ * @param ctx a valid render context
+ */
+MPV_EXPORT void mpv_render_context_report_swap(mpv_render_context *ctx);
+
+/**
+ * Destroy the mpv renderer state.
+ *
+ * If video is still active (e.g. a file playing), video will be disabled
+ * forcefully.
+ *
+ * @param ctx a valid render context. After this function returns, this is not
+ *            a valid pointer anymore. NULL is also allowed and does nothing.
+ */
+MPV_EXPORT void mpv_render_context_free(mpv_render_context *ctx);
+
+#ifdef MPV_CPLUGIN_DYNAMIC_SYM
+
+MPV_DEFINE_SYM_PTR(mpv_render_context_create)
+#define mpv_render_context_create pfn_mpv_render_context_create
+MPV_DEFINE_SYM_PTR(mpv_render_context_set_parameter)
+#define mpv_render_context_set_parameter pfn_mpv_render_context_set_parameter
+MPV_DEFINE_SYM_PTR(mpv_render_context_get_info)
+#define mpv_render_context_get_info pfn_mpv_render_context_get_info
+MPV_DEFINE_SYM_PTR(mpv_render_context_set_update_callback)
+#define mpv_render_context_set_update_callback pfn_mpv_render_context_set_update_callback
+MPV_DEFINE_SYM_PTR(mpv_render_context_update)
+#define mpv_render_context_update pfn_mpv_render_context_update
+MPV_DEFINE_SYM_PTR(mpv_render_context_render)
+#define mpv_render_context_render pfn_mpv_render_context_render
+MPV_DEFINE_SYM_PTR(mpv_render_context_report_swap)
+#define mpv_render_context_report_swap pfn_mpv_render_context_report_swap
+MPV_DEFINE_SYM_PTR(mpv_render_context_free)
+#define mpv_render_context_free pfn_mpv_render_context_free
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
@@ -0,0 +1,211 @@
+/* Copyright (C) 2018 the mpv developers
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef MPV_CLIENT_API_RENDER_GL_H_
+#define MPV_CLIENT_API_RENDER_GL_H_
+
+#include "render.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * OpenGL backend
+ * --------------
+ *
+ * This header contains definitions for using OpenGL with the render.h API.
+ *
+ * OpenGL interop
+ * --------------
+ *
+ * The OpenGL backend has some special rules, because OpenGL itself uses
+ * implicit per-thread contexts, which causes additional API problems.
+ *
+ * This assumes the OpenGL context lives on a certain thread controlled by the
+ * API user. All mpv_render_* APIs have to be assumed to implicitly use the
+ * OpenGL context if you pass a mpv_render_context using the OpenGL backend,
+ * unless specified otherwise.
+ *
+ * The OpenGL context is indirectly accessed through the OpenGL function
+ * pointers returned by the get_proc_address callback in mpv_opengl_init_params.
+ * Generally, mpv will not load the system OpenGL library when using this API.
+ *
+ * OpenGL state
+ * ------------
+ *
+ * OpenGL has a large amount of implicit state. All the mpv functions mentioned
+ * above expect that the OpenGL state is reasonably set to OpenGL standard
+ * defaults. Likewise, mpv will attempt to leave the OpenGL context with
+ * standard defaults. The following state is excluded from this:
+ *
+ *      - the glViewport state
+ *      - the glScissor state (but GL_SCISSOR_TEST is in its default value)
+ *      - glBlendFuncSeparate() state (but GL_BLEND is in its default value)
+ *      - glClearColor() state
+ *      - mpv may overwrite the callback set with glDebugMessageCallback()
+ *      - mpv always disables GL_DITHER at init
+ *
+ * Messing with the state could be avoided by creating shared OpenGL contexts,
+ * but this is avoided for the sake of compatibility and interoperability.
+ *
+ * On OpenGL 2.1, mpv will strictly call functions like glGenTextures() to
+ * create OpenGL objects. You will have to do the same. This ensures that
+ * objects created by mpv and the API users don't clash. Also, legacy state
+ * must be either in its defaults, or not interfere with core state.
+ *
+ * API use
+ * -------
+ *
+ * The mpv_render_* API is used. That API supports multiple backends, and this
+ * section documents specifics for the OpenGL backend.
+ *
+ * Use mpv_render_context_create() with MPV_RENDER_PARAM_API_TYPE set to
+ * MPV_RENDER_API_TYPE_OPENGL, and MPV_RENDER_PARAM_OPENGL_INIT_PARAMS provided.
+ *
+ * Call mpv_render_context_render() with MPV_RENDER_PARAM_OPENGL_FBO to render
+ * the video frame to an FBO.
+ *
+ * Hardware decoding
+ * -----------------
+ *
+ * Hardware decoding via this API is fully supported, but requires some
+ * additional setup. (At least if direct hardware decoding modes are wanted,
+ * instead of copying back surface data from GPU to CPU RAM.)
+ *
+ * There may be certain requirements on the OpenGL implementation:
+ *
+ * - Windows: ANGLE is required (although in theory GL/DX interop could be used)
+ * - Intel/Linux: EGL is required, and also the native display resource needs
+ *                to be provided (e.g. MPV_RENDER_PARAM_X11_DISPLAY for X11 and
+ *                MPV_RENDER_PARAM_WL_DISPLAY for Wayland)
+ * - nVidia/Linux: Both GLX and EGL should work (GLX is required if vdpau is
+ *                 used, e.g. due to old drivers.)
+ * - macOS: CGL is required (CGLGetCurrentContext() returning non-NULL)
+ * - iOS: EAGL is required (EAGLContext.currentContext returning non-nil)
+ *
+ * Once these things are setup, hardware decoding can be enabled/disabled at
+ * any time by setting the "hwdec" property.
+ */
+
+/**
+ * For initializing the mpv OpenGL state via MPV_RENDER_PARAM_OPENGL_INIT_PARAMS.
+ */
+typedef struct mpv_opengl_init_params {
+    /**
+     * This retrieves OpenGL function pointers, and will use them in subsequent
+     * operation.
+     * Usually, you can simply call the GL context APIs from this callback (e.g.
+     * glXGetProcAddressARB or wglGetProcAddress), but some APIs do not always
+     * return pointers for all standard functions (even if present); in this
+     * case you have to compensate by looking up these functions yourself when
+     * libmpv wants to resolve them through this callback.
+     * libmpv will not normally attempt to resolve GL functions on its own, nor
+     * does it link to GL libraries directly.
+     */
+    void *(*get_proc_address)(void *ctx, const char *name);
+    /**
+     * Value passed as ctx parameter to get_proc_address().
+     */
+    void *get_proc_address_ctx;
+} mpv_opengl_init_params;
+
+/**
+ * For MPV_RENDER_PARAM_OPENGL_FBO.
+ */
+typedef struct mpv_opengl_fbo {
+    /**
+     * Framebuffer object name. This must be either a valid FBO generated by
+     * glGenFramebuffers() that is complete and color-renderable, or 0. If the
+     * value is 0, this refers to the OpenGL default framebuffer.
+     */
+    int fbo;
+    /**
+     * Valid dimensions. This must refer to the size of the framebuffer. This
+     * must always be set.
+     */
+    int w, h;
+    /**
+     * Underlying texture internal format (e.g. GL_RGBA8), or 0 if unknown. If
+     * this is the default framebuffer, this can be an equivalent.
+     */
+    int internal_format;
+} mpv_opengl_fbo;
+
+/**
+ * Deprecated. For MPV_RENDER_PARAM_DRM_DISPLAY.
+ */
+typedef struct mpv_opengl_drm_params {
+    int fd;
+    int crtc_id;
+    int connector_id;
+    struct _drmModeAtomicReq **atomic_request_ptr;
+    int render_fd;
+} mpv_opengl_drm_params;
+
+/**
+ * For MPV_RENDER_PARAM_DRM_DRAW_SURFACE_SIZE.
+ */
+typedef struct mpv_opengl_drm_draw_surface_size {
+    /**
+     * size of the draw plane surface in pixels.
+     */
+    int width, height;
+} mpv_opengl_drm_draw_surface_size;
+
+/**
+ * For MPV_RENDER_PARAM_DRM_DISPLAY_V2.
+ */
+typedef struct mpv_opengl_drm_params_v2 {
+    /**
+     * DRM fd (int). Set to -1 if invalid.
+     */
+    int fd;
+
+    /**
+     * Currently used crtc id
+     */
+    int crtc_id;
+
+    /**
+     * Currently used connector id
+     */
+    int connector_id;
+
+    /**
+     * Pointer to a drmModeAtomicReq pointer that is being used for the renderloop.
+     * This pointer should hold a pointer to the atomic request pointer
+     * The atomic request pointer is usually changed at every renderloop.
+     */
+    struct _drmModeAtomicReq **atomic_request_ptr;
+
+    /**
+     * DRM render node. Used for VAAPI interop.
+     * Set to -1 if invalid.
+     */
+    int render_fd;
+} mpv_opengl_drm_params_v2;
+
+
+/**
+ * For backwards compatibility with the old naming of mpv_opengl_drm_draw_surface_size
+ */
+#define mpv_opengl_drm_osd_size mpv_opengl_drm_draw_surface_size
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
@@ -0,0 +1,247 @@
+/* Copyright (C) 2017 the mpv developers
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef MPV_CLIENT_API_STREAM_CB_H_
+#define MPV_CLIENT_API_STREAM_CB_H_
+
+#include "client.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Warning: this API is not stable yet.
+ *
+ * Overview
+ * --------
+ *
+ * This API can be used to make mpv read from a stream with a custom
+ * implementation. This interface is inspired by funopen on BSD and
+ * fopencookie on linux. The stream is backed by user-defined callbacks
+ * which can implement customized open, read, seek, size and close behaviors.
+ *
+ * Usage
+ * -----
+ *
+ * Register your stream callbacks with the mpv_stream_cb_add_ro() function. You
+ * have to provide a mpv_stream_cb_open_ro_fn callback to it (open_fn argument).
+ *
+ * Once registered, you can `loadfile myprotocol://myfile`. Your open_fn will be
+ * invoked with the URI and you must fill out the provided mpv_stream_cb_info
+ * struct. This includes your stream callbacks (like read_fn), and an opaque
+ * cookie, which will be passed as the first argument to all the remaining
+ * stream callbacks.
+ *
+ * Note that your custom callbacks must not invoke libmpv APIs as that would
+ * cause a deadlock. (Unless you call a different mpv_handle than the one the
+ * callback was registered for, and the mpv_handles refer to different mpv
+ * instances.)
+ *
+ * Stream lifetime
+ * ---------------
+ *
+ * A stream remains valid until its close callback has been called. It's up to
+ * libmpv to call the close callback, and the libmpv user cannot close it
+ * directly with the stream_cb API.
+ *
+ * For example, if you consider your custom stream to become suddenly invalid
+ * (maybe because the underlying stream died), libmpv will continue using your
+ * stream. All you can do is returning errors from each callback, until libmpv
+ * gives up and closes it.
+ *
+ * Protocol registration and lifetime
+ * ----------------------------------
+ *
+ * Protocols remain registered until the mpv instance is terminated. This means
+ * in particular that it can outlive the mpv_handle that was used to register
+ * it, but once mpv_terminate_destroy() is called, your registered callbacks
+ * will not be called again.
+ *
+ * Protocol unregistration is finished after the mpv core has been destroyed
+ * (e.g. after mpv_terminate_destroy() has returned).
+ *
+ * If you do not call mpv_terminate_destroy() yourself (e.g. plugin-style code),
+ * you will have to deal with the registration or even streams outliving your
+ * code. Here are some possible ways to do this:
+ * - call mpv_terminate_destroy(), which destroys the core, and will make sure
+ *   all streams are closed once this function returns
+ * - you refcount all resources your stream "cookies" reference, so that it
+ *   doesn't matter if streams live longer than expected
+ * - create "cancellation" semantics: after your protocol has been unregistered,
+ *   notify all your streams that are still opened, and make them drop all
+ *   referenced resources - then return errors from the stream callbacks as
+ *   long as the stream is still opened
+ *
+ */
+
+/**
+ * Read callback used to implement a custom stream. The semantics of the
+ * callback match read(2) in blocking mode. Short reads are allowed (you can
+ * return less bytes than requested, and libmpv will retry reading the rest
+ * with another call). If no data can be immediately read, the callback must
+ * block until there is new data. A return of 0 will be interpreted as final
+ * EOF, although libmpv might retry the read, or seek to a different position.
+ *
+ * @param cookie opaque cookie identifying the stream,
+ *               returned from mpv_stream_cb_open_fn
+ * @param buf buffer to read data into
+ * @param size of the buffer
+ * @return number of bytes read into the buffer
+ * @return 0 on EOF
+ * @return -1 on error
+ */
+typedef int64_t (*mpv_stream_cb_read_fn)(void *cookie, char *buf, uint64_t nbytes);
+
+/**
+ * Seek callback used to implement a custom stream.
+ *
+ * Note that mpv will issue a seek to position 0 immediately after opening. This
+ * is used to test whether the stream is seekable (since seekability might
+ * depend on the URI contents, not just the protocol). Return
+ * MPV_ERROR_UNSUPPORTED if seeking is not implemented for this stream. This
+ * seek also serves to establish the fact that streams start at position 0.
+ *
+ * This callback can be NULL, in which it behaves as if always returning
+ * MPV_ERROR_UNSUPPORTED.
+ *
+ * @param cookie opaque cookie identifying the stream,
+ *               returned from mpv_stream_cb_open_fn
+ * @param offset target absolute stream position
+ * @return the resulting offset of the stream
+ *         MPV_ERROR_UNSUPPORTED or MPV_ERROR_GENERIC if the seek failed
+ */
+typedef int64_t (*mpv_stream_cb_seek_fn)(void *cookie, int64_t offset);
+
+/**
+ * Size callback used to implement a custom stream.
+ *
+ * Return MPV_ERROR_UNSUPPORTED if no size is known.
+ *
+ * This callback can be NULL, in which it behaves as if always returning
+ * MPV_ERROR_UNSUPPORTED.
+ *
+ * @param cookie opaque cookie identifying the stream,
+ *               returned from mpv_stream_cb_open_fn
+ * @return the total size in bytes of the stream
+ */
+typedef int64_t (*mpv_stream_cb_size_fn)(void *cookie);
+
+/**
+ * Close callback used to implement a custom stream.
+ *
+ * @param cookie opaque cookie identifying the stream,
+ *               returned from mpv_stream_cb_open_fn
+ */
+typedef void (*mpv_stream_cb_close_fn)(void *cookie);
+
+/**
+ * Cancel callback used to implement a custom stream.
+ *
+ * This callback is used to interrupt any current or future read and seek
+ * operations. It will be called from a separate thread than the demux
+ * thread, and should not block.
+ *
+ * This callback can be NULL.
+ *
+ * Available since API 1.106.
+ *
+ * @param cookie opaque cookie identifying the stream,
+ *               returned from mpv_stream_cb_open_fn
+ */
+typedef void (*mpv_stream_cb_cancel_fn)(void *cookie);
+
+/**
+ * See mpv_stream_cb_open_ro_fn callback.
+ */
+typedef struct mpv_stream_cb_info {
+    /**
+     * Opaque user-provided value, which will be passed to the other callbacks.
+     * The close callback will be called to release the cookie. It is not
+     * interpreted by mpv. It doesn't even need to be a valid pointer.
+     *
+     * The user sets this in the mpv_stream_cb_open_ro_fn callback.
+     */
+    void *cookie;
+
+    /**
+     * Callbacks set by the user in the mpv_stream_cb_open_ro_fn callback. Some
+     * of them are optional, and can be left unset.
+     *
+     * The following callbacks are mandatory: read_fn, close_fn
+     */
+    mpv_stream_cb_read_fn read_fn;
+    mpv_stream_cb_seek_fn seek_fn;
+    mpv_stream_cb_size_fn size_fn;
+    mpv_stream_cb_close_fn close_fn;
+    mpv_stream_cb_cancel_fn cancel_fn; /* since API 1.106 */
+} mpv_stream_cb_info;
+
+/**
+ * Open callback used to implement a custom read-only (ro) stream. The user
+ * must set the callback fields in the passed info struct. The cookie field
+ * also can be set to store state associated to the stream instance.
+ *
+ * Note that the info struct is valid only for the duration of this callback.
+ * You can't change the callbacks or the pointer to the cookie at a later point.
+ *
+ * Each stream instance created by the open callback can have different
+ * callbacks.
+ *
+ * The close_fn callback will terminate the stream instance. The pointers to
+ * your callbacks and cookie will be discarded, and the callbacks will not be
+ * called again.
+ *
+ * @param user_data opaque user data provided via mpv_stream_cb_add()
+ * @param uri name of the stream to be opened (with protocol prefix)
+ * @param info fields which the user should fill
+ * @return 0 on success, MPV_ERROR_LOADING_FAILED if the URI cannot be opened.
+ */
+typedef int (*mpv_stream_cb_open_ro_fn)(void *user_data, char *uri,
+                                        mpv_stream_cb_info *info);
+
+/**
+ * Add a custom stream protocol. This will register a protocol handler under
+ * the given protocol prefix, and invoke the given callbacks if an URI with the
+ * matching protocol prefix is opened.
+ *
+ * The "ro" is for read-only - only read-only streams can be registered with
+ * this function.
+ *
+ * The callback remains registered until the mpv core is registered.
+ *
+ * If a custom stream with the same name is already registered, then the
+ * MPV_ERROR_INVALID_PARAMETER error is returned.
+ *
+ * @param protocol protocol prefix, for example "foo" for "foo://" URIs
+ * @param user_data opaque pointer passed into the mpv_stream_cb_open_fn
+ *                  callback.
+ * @return error code
+ */
+MPV_EXPORT int mpv_stream_cb_add_ro(mpv_handle *ctx, const char *protocol, void *user_data,
+                                    mpv_stream_cb_open_ro_fn open_fn);
+
+#ifdef MPV_CPLUGIN_DYNAMIC_SYM
+
+MPV_DEFINE_SYM_PTR(mpv_stream_cb_add_ro)
+#define mpv_stream_cb_add_ro pfn_mpv_stream_cb_add_ro
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
@@ -0,0 +1,69 @@
+#define UTIL_EXTERN
+#include "jni_utils.h"
+
+#include <jni.h>
+
+#include <cstdlib>
+
+#include "utf8_convert.h"
+
+jstring new_java_string(JNIEnv* env, const char* utf8) {
+  if (!utf8) return NULL;
+  const std::u16string u16 = plezy::utf8::ToUtf16(utf8);
+  return env->NewString(reinterpret_cast<const jchar*>(u16.data()), static_cast<jsize>(u16.size()));
+}
+
+std::string java_string_to_utf8(JNIEnv* env, jstring jstr) {
+  if (!jstr) return std::string();
+  const jsize len = env->GetStringLength(jstr);
+  const jchar* chars = env->GetStringChars(jstr, NULL);
+  if (!chars) return std::string();
+  std::string out = plezy::utf8::FromUtf16(reinterpret_cast<const char16_t*>(chars), static_cast<size_t>(len));
+  env->ReleaseStringChars(jstr, chars);
+  return out;
+}
+
+bool acquire_jni_env(JavaVM* vm, JNIEnv** env) {
+  int ret = vm->GetEnv((void**)env, JNI_VERSION_1_6);
+  if (ret == JNI_EDETACHED)
+    return vm->AttachCurrentThread(env, NULL) == 0;
+  else
+    return ret == JNI_OK;
+}
+
+void init_methods_cache(JNIEnv* env) {
+  static bool methods_initialized = false;
+  if (methods_initialized) return;
+
+  // Plain assignments straight from env->FindClass, promoted to global refs
+  // on the following line, keep every Get*MethodID owner traceable for
+  // scripts/checks/check_shrinker_rules.py.
+  java_Integer = env->FindClass("java/lang/Integer");
+  java_Integer = reinterpret_cast<jclass>(env->NewGlobalRef(java_Integer));
+  java_Integer_init = env->GetMethodID(java_Integer, "<init>", "(I)V");
+  java_Double = env->FindClass("java/lang/Double");
+  java_Double = reinterpret_cast<jclass>(env->NewGlobalRef(java_Double));
+  java_Double_init = env->GetMethodID(java_Double, "<init>", "(D)V");
+  java_Boolean = env->FindClass("java/lang/Boolean");
+  java_Boolean = reinterpret_cast<jclass>(env->NewGlobalRef(java_Boolean));
+  java_Boolean_init = env->GetMethodID(java_Boolean, "<init>", "(Z)V");
+
+  mpv_MpvPlayer = env->FindClass("com/edde746/plezy/libmpv/MpvPlayer");
+  mpv_MpvPlayer = reinterpret_cast<jclass>(env->NewGlobalRef(mpv_MpvPlayer));
+  mpv_MpvPlayer_onPropertyChanged_S =
+      env->GetStaticMethodID(mpv_MpvPlayer, "onPropertyChanged", "(Ljava/lang/String;)V");
+  mpv_MpvPlayer_onPropertyChanged_Sb =
+      env->GetStaticMethodID(mpv_MpvPlayer, "onPropertyChanged", "(Ljava/lang/String;Z)V");
+  mpv_MpvPlayer_onPropertyChanged_Sl =
+      env->GetStaticMethodID(mpv_MpvPlayer, "onPropertyChanged", "(Ljava/lang/String;J)V");
+  mpv_MpvPlayer_onPropertyChanged_Sd =
+      env->GetStaticMethodID(mpv_MpvPlayer, "onPropertyChanged", "(Ljava/lang/String;D)V");
+  mpv_MpvPlayer_onPropertyChanged_SS =
+      env->GetStaticMethodID(mpv_MpvPlayer, "onPropertyChanged", "(Ljava/lang/String;Ljava/lang/String;)V");
+  mpv_MpvPlayer_onEvent = env->GetStaticMethodID(mpv_MpvPlayer, "onEvent", "(I)V");
+  mpv_MpvPlayer_onEndFile = env->GetStaticMethodID(mpv_MpvPlayer, "onEndFile", "(I)V");
+  mpv_MpvPlayer_onLogMessage =
+      env->GetStaticMethodID(mpv_MpvPlayer, "onLogMessage", "(Ljava/lang/String;ILjava/lang/String;)V");
+
+  methods_initialized = true;
+}
@@ -0,0 +1,30 @@
+#pragma once
+
+#include <jni.h>
+
+#include <string>
+
+#define jni_func_name(name) Java_com_edde746_plezy_libmpv_MpvPlayer_##name
+#define jni_func(return_type, name, ...) \
+  JNIEXPORT return_type JNICALL jni_func_name(name)(JNIEnv * env, jobject obj, ##__VA_ARGS__)
+
+bool acquire_jni_env(JavaVM* vm, JNIEnv** env);
+void init_methods_cache(JNIEnv* env);
+
+// Standard-UTF-8 string crossings; see utf8_convert.h for why NewStringUTF /
+// GetStringUTFChars are wrong for mpv data. `utf8` may be NULL (-> NULL).
+jstring new_java_string(JNIEnv* env, const char* utf8);
+// `jstr` may be NULL (-> empty).
+std::string java_string_to_utf8(JNIEnv* env, jstring jstr);
+
+#ifndef UTIL_EXTERN
+#define UTIL_EXTERN extern
+#endif
+
+UTIL_EXTERN jclass java_Integer, java_Double, java_Boolean;
+UTIL_EXTERN jmethodID java_Integer_init, java_Double_init, java_Boolean_init;
+
+UTIL_EXTERN jclass mpv_MpvPlayer;
+UTIL_EXTERN jmethodID mpv_MpvPlayer_onPropertyChanged_S, mpv_MpvPlayer_onPropertyChanged_Sb,
+    mpv_MpvPlayer_onPropertyChanged_Sl, mpv_MpvPlayer_onPropertyChanged_Sd, mpv_MpvPlayer_onPropertyChanged_SS,
+    mpv_MpvPlayer_onEvent, mpv_MpvPlayer_onEndFile, mpv_MpvPlayer_onLogMessage;
@@ -0,0 +1,13 @@
+#include "log.h"
+
+#include "globals.h"
+#include "jni_utils.h"
+
+void die(const char* msg) {
+  ALOGE("%s", msg);
+  JNIEnv* env = nullptr;
+  if (g_vm && acquire_jni_env(g_vm, &env) && env) {
+    jclass cls = env->FindClass("java/lang/RuntimeException");
+    if (cls) env->ThrowNew(cls, msg);
+  }
+}
@@ -0,0 +1,31 @@
+#pragma once
+
+#include <android/log.h>
+
+#define DEBUG 1
+
+#define LOG_TAG "mpv"
+#define ALOGE(...) __android_log_print(ANDROID_LOG_ERROR, LOG_TAG, __VA_ARGS__)
+#if DEBUG
+#define ALOGV(...) __android_log_print(ANDROID_LOG_VERBOSE, LOG_TAG, __VA_ARGS__)
+#else
+#define ALOGV(...) (void)0
+#endif
+
+void die(const char* msg);
+
+#define CHECK_MPV_INIT()                \
+  do {                                  \
+    if (__builtin_expect(!g_mpv, 0)) {  \
+      die("libmpv is not initialized"); \
+      return;                           \
+    }                                   \
+  } while (0)
+
+#define CHECK_MPV_INIT_RET(val)         \
+  do {                                  \
+    if (__builtin_expect(!g_mpv, 0)) {  \
+      die("libmpv is not initialized"); \
+      return val;                       \
+    }                                   \
+  } while (0)
@@ -0,0 +1,157 @@
+#include <jni.h>
+#include <mpv/client.h>
+#include <pthread.h>
+
+#include <atomic>
+#include <clocale>
+#include <cstdio>
+#include <cstdlib>
+#include <ctime>
+#include <mutex>
+#include <string>
+#include <vector>
+
+extern "C" {
+#include <libavcodec/jni.h>
+}
+
+#include "event.h"
+#include "jni_utils.h"
+#include "log.h"
+
+#define ARRAYLEN(a) (sizeof(a) / sizeof(a[0]))
+
+void render_cleanup(JNIEnv* env);
+
+static void* destroy_mpv_thread(void* arg) {
+  mpv_handle* handle = (mpv_handle*)arg;
+  mpv_terminate_destroy(handle);
+  return NULL;
+}
+
+// Fire-and-forget mpv_terminate_destroy on a detached thread.
+// Safe because the event thread has been joined and g_mpv cleared —
+// no other code references this handle.
+static void async_destroy(mpv_handle* handle) {
+  pthread_t tid;
+  if (pthread_create(&tid, NULL, destroy_mpv_thread, handle) == 0) {
+    pthread_detach(tid);
+  } else {
+    // Fallback: destroy synchronously if thread creation fails
+    mpv_terminate_destroy(handle);
+  }
+}
+
+extern "C" {
+jni_func(void, nativeCreate, jobject appctx);
+jni_func(void, nativeInit);
+jni_func(void, nativeDestroy);
+
+jni_func(void, nativeCommand, jobjectArray jarray);
+};
+
+JavaVM* g_vm;
+mpv_handle* g_mpv;
+std::atomic<bool> g_event_thread_request_exit(false);
+
+static pthread_t event_thread_id;
+static std::mutex g_lifecycle_mutex;
+
+static void prepare_environment(JNIEnv* env, jobject appctx) {
+  setlocale(LC_NUMERIC, "C");
+
+  if (!env->GetJavaVM(&g_vm) && g_vm) av_jni_set_java_vm(g_vm, NULL);
+
+  jobject global_appctx = env->NewGlobalRef(appctx);
+  if (global_appctx) av_jni_set_android_app_ctx(global_appctx, NULL);
+
+  init_methods_cache(env);
+}
+
+jni_func(void, nativeCreate, jobject appctx) {
+  std::lock_guard<std::mutex> lock(g_lifecycle_mutex);
+  prepare_environment(env, appctx);
+
+  mpv_handle* leaked_mpv = NULL;
+  if (g_mpv) {
+    ALOGE("destroying leaked mpv instance");
+    leaked_mpv = g_mpv;
+    g_event_thread_request_exit = true;
+    mpv_wakeup(leaked_mpv);
+    pthread_join(event_thread_id, NULL);
+    g_mpv = NULL;
+    render_cleanup(env);
+  }
+
+  g_mpv = mpv_create();
+  if (!g_mpv) {
+    die("context init failed");
+    if (leaked_mpv) mpv_terminate_destroy(leaked_mpv);
+    return;
+  }
+
+  mpv_request_log_messages(g_mpv, "v");
+
+  // Async teardown of leaked handle — doesn't block caller
+  if (leaked_mpv) async_destroy(leaked_mpv);
+}
+
+jni_func(void, nativeInit) {
+  if (!g_mpv) {
+    die("mpv is not created");
+    return;
+  }
+
+  if (mpv_initialize(g_mpv) < 0) {
+    die("mpv init failed");
+    return;
+  }
+
+  g_event_thread_request_exit = false;
+  if (pthread_create(&event_thread_id, NULL, event_thread, NULL) != 0) {
+    die("thread create failed");
+    return;
+  }
+  pthread_setname_np(event_thread_id, "event_thread");
+}
+
+jni_func(void, nativeDestroy) {
+  std::lock_guard<std::mutex> lock(g_lifecycle_mutex);
+  if (!g_mpv) {
+    ALOGV("mpv destroy called but it's already destroyed");
+    return;
+  }
+  mpv_handle* local_mpv = g_mpv;
+
+  g_event_thread_request_exit = true;
+  mpv_wakeup(local_mpv);
+  pthread_join(event_thread_id, NULL);
+
+  g_mpv = NULL;
+  render_cleanup(env);
+
+  // Async teardown — nativeDestroy returns immediately
+  async_destroy(local_mpv);
+}
+
+jni_func(void, nativeCommand, jobjectArray jarray) {
+  CHECK_MPV_INIT();
+
+  const char* arguments[128] = {0};
+  int len = env->GetArrayLength(jarray);
+  if (len >= (int)ARRAYLEN(arguments)) {
+    die("too many command arguments");
+    return;
+  }
+
+  std::vector<std::string> storage;
+  storage.reserve(len);
+  for (int i = 0; i < len; ++i) {
+    jstring jarg = (jstring)env->GetObjectArrayElement(jarray, i);
+    storage.push_back(java_string_to_utf8(env, jarg));
+    arguments[i] = storage.back().c_str();
+    env->DeleteLocalRef(jarg);
+  }
+
+  mpv_command(g_mpv, arguments);
+}
@@ -0,0 +1,115 @@
+#include <jni.h>
+#include <mpv/client.h>
+
+#include <cstdlib>
+#include <string>
+
+#include "globals.h"
+#include "jni_utils.h"
+#include "log.h"
+
+extern "C" {
+jni_func(jint, nativeSetOptionString, jstring option, jstring value);
+
+jni_func(jobject, nativeGetPropertyInt, jstring property);
+jni_func(void, nativeSetPropertyInt, jstring property, jint value);
+jni_func(jobject, nativeGetPropertyDouble, jstring property);
+jni_func(void, nativeSetPropertyDouble, jstring property, jdouble value);
+jni_func(jobject, nativeGetPropertyBoolean, jstring property);
+jni_func(void, nativeSetPropertyBoolean, jstring property, jboolean value);
+jni_func(jstring, nativeGetPropertyString, jstring jproperty);
+jni_func(void, nativeSetPropertyString, jstring jproperty, jstring jvalue);
+
+jni_func(void, nativeObserveProperty, jstring property, jint format);
+}
+
+jni_func(jint, nativeSetOptionString, jstring joption, jstring jvalue) {
+  CHECK_MPV_INIT_RET(0);
+
+  const char* option = env->GetStringUTFChars(joption, NULL);
+  const std::string value = java_string_to_utf8(env, jvalue);
+
+  int result = mpv_set_option_string(g_mpv, option, value.c_str());
+
+  env->ReleaseStringUTFChars(joption, option);
+
+  return result;
+}
+
+static int common_get_property(JNIEnv* env, jstring jproperty, mpv_format format, void* output) {
+  CHECK_MPV_INIT_RET(-1);
+
+  const char* prop = env->GetStringUTFChars(jproperty, NULL);
+  int result = mpv_get_property(g_mpv, prop, format, output);
+  if (result < 0) ALOGE("mpv_get_property(%s) format %d returned error %s", prop, format, mpv_error_string(result));
+  env->ReleaseStringUTFChars(jproperty, prop);
+
+  return result;
+}
+
+static int common_set_property(JNIEnv* env, jstring jproperty, mpv_format format, void* value) {
+  CHECK_MPV_INIT_RET(-1);
+
+  const char* prop = env->GetStringUTFChars(jproperty, NULL);
+  int result = mpv_set_property(g_mpv, prop, format, value);
+  if (result < 0)
+    ALOGE("mpv_set_property(%s, %p) format %d returned error %s", prop, value, format, mpv_error_string(result));
+  env->ReleaseStringUTFChars(jproperty, prop);
+
+  return result;
+}
+
+jni_func(jobject, nativeGetPropertyInt, jstring jproperty) {
+  int64_t value = 0;
+  if (common_get_property(env, jproperty, MPV_FORMAT_INT64, &value) < 0) return NULL;
+  return env->NewObject(java_Integer, java_Integer_init, (jint)value);
+}
+
+jni_func(jobject, nativeGetPropertyDouble, jstring jproperty) {
+  double value = 0;
+  if (common_get_property(env, jproperty, MPV_FORMAT_DOUBLE, &value) < 0) return NULL;
+  return env->NewObject(java_Double, java_Double_init, (jdouble)value);
+}
+
+jni_func(jobject, nativeGetPropertyBoolean, jstring jproperty) {
+  int value = 0;
+  if (common_get_property(env, jproperty, MPV_FORMAT_FLAG, &value) < 0) return NULL;
+  return env->NewObject(java_Boolean, java_Boolean_init, (jboolean)value);
+}
+
+jni_func(jstring, nativeGetPropertyString, jstring jproperty) {
+  char* value;
+  if (common_get_property(env, jproperty, MPV_FORMAT_STRING, &value) < 0) return NULL;
+  jstring jvalue = new_java_string(env, value);
+  mpv_free(value);
+  return jvalue;
+}
+
+jni_func(void, nativeSetPropertyInt, jstring jproperty, jint jvalue) {
+  int64_t value = static_cast<int64_t>(jvalue);
+  common_set_property(env, jproperty, MPV_FORMAT_INT64, &value);
+}
+
+jni_func(void, nativeSetPropertyDouble, jstring jproperty, jdouble jvalue) {
+  double value = static_cast<double>(jvalue);
+  common_set_property(env, jproperty, MPV_FORMAT_DOUBLE, &value);
+}
+
+jni_func(void, nativeSetPropertyBoolean, jstring jproperty, jboolean jvalue) {
+  int value = jvalue == JNI_TRUE ? 1 : 0;
+  common_set_property(env, jproperty, MPV_FORMAT_FLAG, &value);
+}
+
+jni_func(void, nativeSetPropertyString, jstring jproperty, jstring jvalue) {
+  const std::string value = java_string_to_utf8(env, jvalue);
+  const char* value_ptr = value.c_str();
+  common_set_property(env, jproperty, MPV_FORMAT_STRING, &value_ptr);
+}
+
+jni_func(void, nativeObserveProperty, jstring property, jint format) {
+  CHECK_MPV_INIT();
+  const char* prop = env->GetStringUTFChars(property, NULL);
+  int result = mpv_observe_property(g_mpv, 0, prop, (mpv_format)format);
+  if (result < 0) ALOGE("mpv_observe_property(%s) format %d returned error %s", prop, format, mpv_error_string(result));
+  env->ReleaseStringUTFChars(property, prop);
+}
@@ -0,0 +1,79 @@
+#include <jni.h>
+#include <mpv/client.h>
+
+#include "globals.h"
+#include "jni_utils.h"
+#include "log.h"
+
+extern "C" {
+jni_func(void, nativeAttachSurface, jobject surface_);
+jni_func(void, nativeDetachSurface);
+jni_func(void, nativeAttachOsdSurface, jobject surface_);
+jni_func(void, nativeDetachOsdSurface);
+};
+
+static jobject surface;
+
+jni_func(void, nativeAttachSurface, jobject surface_) {
+  CHECK_MPV_INIT();
+
+  surface = env->NewGlobalRef(surface_);
+  if (!surface) {
+    die("invalid surface provided");
+    return;
+  }
+  int64_t wid = reinterpret_cast<intptr_t>(surface);
+  int result = mpv_set_option(g_mpv, "wid", MPV_FORMAT_INT64, &wid);
+  if (result < 0) ALOGE("mpv_set_option(wid) returned error %s", mpv_error_string(result));
+}
+
+jni_func(void, nativeDetachSurface) {
+  CHECK_MPV_INIT();
+
+  int64_t wid = 0;
+  int result = mpv_set_option(g_mpv, "wid", MPV_FORMAT_INT64, &wid);
+  if (result < 0) ALOGE("mpv_set_option(wid) returned error %s", mpv_error_string(result));
+
+  env->DeleteGlobalRef(surface);
+  surface = NULL;
+}
+
+static jobject osd_surface;
+
+// The OSD plane of vo=mediacodec. Same lifetime rules as the video surface:
+// the global ref must outlive the VO, so detach only after vo has been unset.
+jni_func(void, nativeAttachOsdSurface, jobject surface_) {
+  CHECK_MPV_INIT();
+
+  osd_surface = env->NewGlobalRef(surface_);
+  if (!osd_surface) {
+    die("invalid osd surface provided");
+    return;
+  }
+  int64_t wid = reinterpret_cast<intptr_t>(osd_surface);
+  int result = mpv_set_option(g_mpv, "vo-mediacodec-osd-surface", MPV_FORMAT_INT64, &wid);
+  if (result < 0) ALOGE("mpv_set_option(vo-mediacodec-osd-surface) returned error %s", mpv_error_string(result));
+}
+
+jni_func(void, nativeDetachOsdSurface) {
+  CHECK_MPV_INIT();
+  if (!osd_surface) return;
+
+  int64_t wid = 0;
+  int result = mpv_set_option(g_mpv, "vo-mediacodec-osd-surface", MPV_FORMAT_INT64, &wid);
+  if (result < 0) ALOGE("mpv_set_option(vo-mediacodec-osd-surface) returned error %s", mpv_error_string(result));
+
+  env->DeleteGlobalRef(osd_surface);
+  osd_surface = NULL;
+}
+
+void render_cleanup(JNIEnv* env) {
+  if (surface) {
+    env->DeleteGlobalRef(surface);
+    surface = NULL;
+  }
+  if (osd_surface) {
+    env->DeleteGlobalRef(osd_surface);
+    osd_surface = NULL;
+  }
+}
@@ -0,0 +1,126 @@
+#pragma once
+
+#include <cstddef>
+#include <cstdint>
+#include <string>
+
+// UTF-8 <-> UTF-16 transcoding for the JNI boundary.
+//
+// mpv speaks standard UTF-8. JNI's NewStringUTF/GetStringUTFChars speak
+// *modified* UTF-8: supplementary-plane characters are CESU-8 surrogate pairs
+// and NUL is 0xC0 0x80. Feeding one encoding to the other corrupts emoji in
+// file names and titles, and malformed bytes from mpv (log lines, ID3 tags,
+// system-encoded paths) abort under CheckJNI. Both directions therefore go
+// through UTF-16 with NewString/GetStringChars; malformed input is replaced
+// with U+FFFD one unit at a time, matching shared/cpp/sanitize_utf8.h on
+// desktop. Header-only and JNI-free so the host test harness can exercise it.
+
+namespace plezy {
+namespace utf8 {
+
+// Decodes one scalar value at `s`. Returns the number of bytes consumed, or 0
+// when `s` does not start a well-formed sequence (Unicode Table 3-7).
+inline size_t DecodeOne(const unsigned char* s, size_t len, uint32_t* cp) {
+  const unsigned char c = s[0];
+  if (c < 0x80) {
+    *cp = c;
+    return 1;
+  }
+  size_t need;
+  unsigned char lo = 0x80, hi = 0xBF;
+  if (c >= 0xC2 && c <= 0xDF) {
+    need = 2;
+    *cp = c & 0x1F;
+  } else if (c >= 0xE0 && c <= 0xEF) {
+    need = 3;
+    *cp = c & 0x0F;
+    if (c == 0xE0) lo = 0xA0;
+    if (c == 0xED) hi = 0x9F;  // no surrogates
+  } else if (c >= 0xF0 && c <= 0xF4) {
+    need = 4;
+    *cp = c & 0x07;
+    if (c == 0xF0) lo = 0x90;
+    if (c == 0xF4) hi = 0x8F;  // <= U+10FFFF
+  } else {
+    return 0;
+  }
+  if (len < need) return 0;
+  for (size_t i = 1; i < need; ++i) {
+    const unsigned char b = s[i];
+    if (b < lo || b > hi) return 0;
+    lo = 0x80;
+    hi = 0xBF;
+    *cp = (*cp << 6) | (b & 0x3F);
+  }
+  return need;
+}
+
+// Standard UTF-8 -> UTF-16. Malformed bytes become U+FFFD.
+inline std::u16string ToUtf16(const char* input, size_t len) {
+  std::u16string out;
+  if (!input) return out;
+  out.reserve(len);
+  const unsigned char* s = reinterpret_cast<const unsigned char*>(input);
+  size_t pos = 0;
+  while (pos < len) {
+    uint32_t cp;
+    const size_t n = DecodeOne(s + pos, len - pos, &cp);
+    if (n == 0) {
+      out.push_back(u'\uFFFD');
+      pos += 1;
+      continue;
+    }
+    pos += n;
+    if (cp < 0x10000) {
+      out.push_back(static_cast<char16_t>(cp));
+    } else {
+      cp -= 0x10000;
+      out.push_back(static_cast<char16_t>(0xD800 | (cp >> 10)));
+      out.push_back(static_cast<char16_t>(0xDC00 | (cp & 0x3FF)));
+    }
+  }
+  return out;
+}
+
+inline std::u16string ToUtf16(const char* input) {
+  return input ? ToUtf16(input, std::char_traits<char>::length(input)) : std::u16string();
+}
+
+// UTF-16 -> standard UTF-8. Lone surrogates become U+FFFD.
+inline std::string FromUtf16(const char16_t* input, size_t len) {
+  std::string out;
+  if (!input) return out;
+  out.reserve(len * 3);
+  for (size_t i = 0; i < len; ++i) {
+    uint32_t cp = input[i];
+    if (cp >= 0xD800 && cp <= 0xDBFF) {
+      if (i + 1 < len && input[i + 1] >= 0xDC00 && input[i + 1] <= 0xDFFF) {
+        cp = 0x10000 + ((cp - 0xD800) << 10) + (input[i + 1] - 0xDC00);
+        ++i;
+      } else {
+        cp = 0xFFFD;
+      }
+    } else if (cp >= 0xDC00 && cp <= 0xDFFF) {
+      cp = 0xFFFD;
+    }
+    if (cp < 0x80) {
+      out.push_back(static_cast<char>(cp));
+    } else if (cp < 0x800) {
+      out.push_back(static_cast<char>(0xC0 | (cp >> 6)));
+      out.push_back(static_cast<char>(0x80 | (cp & 0x3F)));
+    } else if (cp < 0x10000) {
+      out.push_back(static_cast<char>(0xE0 | (cp >> 12)));
+      out.push_back(static_cast<char>(0x80 | ((cp >> 6) & 0x3F)));
+      out.push_back(static_cast<char>(0x80 | (cp & 0x3F)));
+    } else {
+      out.push_back(static_cast<char>(0xF0 | (cp >> 18)));
+      out.push_back(static_cast<char>(0x80 | ((cp >> 12) & 0x3F)));
+      out.push_back(static_cast<char>(0x80 | ((cp >> 6) & 0x3F)));
+      out.push_back(static_cast<char>(0x80 | (cp & 0x3F)));
+    }
+  }
+  return out;
+}
+
+}  // namespace utf8
+}  // namespace plezy
@@ -0,0 +1,13 @@
+package com.edde746.plezy.libmpv
+
+enum class EndFileReason(val id: Int) {
+  Eof(0),
+  Stop(2),
+  Quit(3),
+  Error(4),
+  Redirect(5);
+
+  companion object {
+    fun fromId(id: Int): EndFileReason? = entries.find { it.id == id }
+  }
+}
--- a/Show More
+++ b/Show More